DNS Proxy

A simple DNS proxy server that supports all existing DNS protocols including DNS-over-TLS, DNS-over-HTTPS, DNSCrypt, and DNS-over-QUIC. Moreover, it can work as a DNS-over-HTTPS, DNS-over-TLS or DNS-over-QUIC server.

Note that DNS-over-QUIC support is experimental, don't use it in production.

How to build
Usage
Examples

How to build

You will need Go v1.19 or later.

$ go build -mod=vendor

Usage

Usage:
  dnsproxy [OPTIONS]

Application Options:
      --config-path=           yaml configuration file. Minimal working configuration in config.yaml.dist.
                               Options passed through command line will override the ones from this file.
  -v, --verbose                Verbose output (optional)
  -o, --output=                Path to the log file. If not set, write to stdout.
  -l, --listen=                Listening addresses
  -p, --port=                  Listening ports. Zero value disables TCP and UDP listeners
  -s, --https-port=            Listening ports for DNS-over-HTTPS
  -t, --tls-port=              Listening ports for DNS-over-TLS
  -q, --quic-port=             Listening ports for DNS-over-QUIC
  -y, --dnscrypt-port=         Listening ports for DNSCrypt
  -c, --tls-crt=               Path to a file with the certificate chain
  -k, --tls-key=               Path to a file with the private key
      --tls-min-version=       Minimum TLS version, for example 1.0
      --tls-max-version=       Maximum TLS version, for example 1.3
      --insecure               Disable secure TLS certificate validation
  -g, --dnscrypt-config=       Path to a file with DNSCrypt configuration. You can generate one using https://github.com/ameshkov/dnscrypt
      --http3                  Enable HTTP/3 support
  -u, --upstream=              An upstream to be used (can be specified multiple times).
                               You can also specify path to a file with the list of servers
  -b, --bootstrap=             Bootstrap DNS for DoH and DoT, can be specified multiple times (default: 8.8.8.8:53)
  -f, --fallback=              Fallback resolvers to use when regular ones are unavailable, can be specified multiple times.
                               You can also specify path to a file with the list of servers
      --private-rdns-upstream= Private DNS upstreams to use for reverse DNS lookups of private addresses, can
                               be specified multiple times
      --all-servers            If specified, parallel queries to all configured upstream servers are enabled
      --fastest-addr           Respond to A or AAAA requests only with the fastest IP address
      --cache                  If specified, DNS cache is enabled
      --cache-size=            Cache size (in bytes). Default: 64k
      --cache-min-ttl=         Minimum TTL value for DNS entries, in seconds. Capped at 3600.
                               Artificially extending TTLs should only be done with careful consideration.
      --cache-max-ttl=         Maximum TTL value for DNS entries, in seconds.
      --cache-optimistic       If specified, optimistic DNS cache is enabled
  -r, --ratelimit=             Ratelimit (requests per second)
      --refuse-any             If specified, refuse ANY requests
      --edns                   Use EDNS Client Subnet extension
      --edns-addr=             Send EDNS Client Address
      --dns64                  If specified, dnsproxy will act as a DNS64 server
      --dns64-prefix=          Prefix used to handle DNS64. If not specified, dnsproxy uses the 'Well-Known Prefix' 64:ff9b::.
                               Can be specified multiple times
      --ipv6-disabled          If specified, all AAAA requests will be replied with NoError RCode and empty answer
      --bogus-nxdomain=        Transform the responses containing at least a single IP that matches specified addresses
                               and CIDRs into NXDOMAIN.  Can be specified multiple times.
      --udp-buf-size=          Set the size of the UDP buffer in bytes. A value <= 0 will use the system default.
      --max-go-routines=       Set the maximum number of go routines. A value <= 0 will not not set a maximum.
      --pprof                  If present, exposes pprof information on localhost:6060.
      --version                Prints the program version

Help Options:
  -h, --help              Show this help message

Examples

Simple options

Runs a DNS proxy on 0.0.0.0:53 with a single upstream - Google DNS.

./dnsproxy -u 8.8.8.8:53

The same proxy with verbose logging enabled writing it to the file log.txt.

./dnsproxy -u 8.8.8.8:53 -v -o log.txt

Runs a DNS proxy on 127.0.0.1:5353 with multiple upstreams.

./dnsproxy -l 127.0.0.1 -p 5353 -u 8.8.8.8:53 -u 1.1.1.1:53

Listen on multiple interfaces and ports:

./dnsproxy -l 127.0.0.1 -l 192.168.1.10 -p 5353 -p 5354 -u 1.1.1.1

The plain DNS upstream server may be specified in several ways:

With a plain IP address:
```
./dnsproxy -l 127.0.0.1 -u 8.8.8.8:53
```

With a hostname or plain IP address and the udp:// scheme:

./dnsproxy -l 127.0.0.1 -u udp://dns.google -u udp://1.1.1.1

With a hostname or plain IP address and the tcp:// scheme to force using TCP:
```
./dnsproxy -l 127.0.0.1 -u tcp://dns.google -u tcp://1.1.1.1
```

Encrypted upstreams

DNS-over-TLS upstream:

./dnsproxy -u tls://dns.adguard.com

DNS-over-HTTPS upstream with specified bootstrap DNS:

./dnsproxy -u https://dns.adguard.com/dns-query -b 1.1.1.1:53

DNS-over-QUIC upstream:

./dnsproxy -u quic://dns.adguard.com

DNS-over-HTTPS upstream with enabled HTTP/3 support (chooses it if it's faster):

./dnsproxy -u https://dns.google/dns-query --http3

DNS-over-HTTPS upstream with forced HTTP/3 (no fallback to other protocol):

./dnsproxy -u h3://dns.google/dns-query

DNSCrypt upstream (DNS Stamp of AdGuard DNS):

./dnsproxy -u sdns://AQIAAAAAAAAAFDE3Ni4xMDMuMTMwLjEzMDo1NDQzINErR_JS3PLCu_iZEIbq95zkSV2LFsigxDIuUso_OQhzIjIuZG5zY3J5cHQuZGVmYXVsdC5uczEuYWRndWFyZC5jb20

DNS-over-HTTPS upstream (DNS Stamp of Cloudflare DNS):

./dnsproxy -u sdns://AgcAAAAAAAAABzEuMC4wLjGgENk8mGSlIfMGXMOlIlCcKvq7AVgcrZxtjon911-ep0cg63Ul-I8NlFj4GplQGb_TTLiczclX57DvMV8Q-JdjgRgSZG5zLmNsb3VkZmxhcmUuY29tCi9kbnMtcXVlcnk

DNS-over-TLS upstream with two fallback servers (to be used when the main upstream is not available):

./dnsproxy -u tls://dns.adguard.com -f 8.8.8.8:53 -f 1.1.1.1:53

Encrypted DNS server

Runs a DNS-over-TLS proxy on 127.0.0.1:853.

./dnsproxy -l 127.0.0.1 --tls-port=853 --tls-crt=example.crt --tls-key=example.key -u 8.8.8.8:53 -p 0

Runs a DNS-over-HTTPS proxy on 127.0.0.1:443.

./dnsproxy -l 127.0.0.1 --https-port=443 --tls-crt=example.crt --tls-key=example.key -u 8.8.8.8:53 -p 0

Runs a DNS-over-HTTPS proxy on 127.0.0.1:443 with HTTP/3 support.

./dnsproxy -l 127.0.0.1 --https-port=443 --http3 --tls-crt=example.crt --tls-key=example.key -u 8.8.8.8:53 -p 0

Runs a DNS-over-QUIC proxy on 127.0.0.1:853.

./dnsproxy -l 127.0.0.1 --quic-port=853 --tls-crt=example.crt --tls-key=example.key -u 8.8.8.8:53 -p 0

Runs a DNSCrypt proxy on 127.0.0.1:443.

./dnsproxy -l 127.0.0.1 --dnscrypt-config=./dnscrypt-config.yaml --dnscrypt-port=443 --upstream=8.8.8.8:53 -p 0

Please note that in order to run a DNSCrypt proxy, you need to obtain DNSCrypt configuration first. You can use https://github.com/ameshkov/dnscrypt command-line tool to do that with a command like this ./dnscrypt generate --provider-name=2.dnscrypt-cert.example.org --out=dnscrypt-config.yaml

Additional features

Runs a DNS proxy on 0.0.0.0:53 with rate limit set to 10 rps, enabled DNS cache, and that refuses type=ANY requests.

./dnsproxy -u 8.8.8.8:53 -r 10 --cache --refuse-any

Runs a DNS proxy on 127.0.0.1:5353 with multiple upstreams and enable parallel queries to all configured upstream servers.

./dnsproxy -l 127.0.0.1 -p 5353 -u 8.8.8.8:53 -u 1.1.1.1:53 -u tls://dns.adguard.com --all-servers

Loads upstreams list from a file.

./dnsproxy -l 127.0.0.1 -p 5353 -u ./upstreams.txt

DNS64 server

dnsproxy is capable of working as a DNS64 server.

What is DNS64/NAT64 This is a mechanism of providing IPv6 access to IPv4. Using a NAT64 gateway with IPv4-IPv6 translation capability lets IPv6-only clients connect to IPv4-only services via synthetic IPv6 addresses starting with a prefix that routes them to the NAT64 gateway. DNS64 is a DNS service that returns AAAA records with these synthetic IPv6 addresses for IPv4-only destinations (with A but not AAAA records in the DNS). This lets IPv6-only clients use NAT64 gateways without any other configuration.

Fastest addr + cache-min-ttl

This option would be useful to the users with problematic network connection. In this mode, dnsproxy would detect the fastest IP address among all that were returned, and it will return only it.

Additionally, for those with problematic network connection, it makes sense to override cache-min-ttl. In this case, dnsproxy will make sure that DNS responses are cached for at least the specified amount of time.

It makes sense to run it with multiple upstream servers only.

Run a DNS proxy with two upstreams, min-TTL set to 10 minutes, fastest address detection is enabled:

./dnsproxy -u 8.8.8.8 -u 1.1.1.1 --cache --cache-min-ttl=600 --fastest-addr

who run dnsproxy with multiple upstreams

Specifying upstreams for domains

You can specify upstreams that will be used for a specific domain(s). We use the dnsmasq-like syntax (see --server description here).

Syntax: [/[domain1][/../domainN]/]upstreamString

If one or more domains are specified, that upstream (upstreamString) is used only for those domains. Usually, it is used for private nameservers. For instance, if you have a nameserver on your network which deals with xxx.internal.local at 192.168.0.1 then you can specify [/internal.local/]192.168.0.1, and dnsproxy will send all queries to that nameserver. Everything else will be sent to the default upstreams (which are mandatory!).

An empty domain specification, // has the special meaning of "unqualified names only" ie names without any dots in them.
More specific domains take precedence over less specific domains, so: --upstream=[/host.com/]1.2.3.4 --upstream=[/www.host.com/]2.3.4.5 will send queries for *.host.com to 1.2.3.4, except *.www.host.com, which will go to 2.3.4.5
The special server address # means, "use the standard servers", so: --upstream=[/host.com/]1.2.3.4 --upstream=[/www.host.com/]# will send queries for *.host.com to 1.2.3.4, except *.www.host.com which will be forwarded as usual.
The wildcard * has special meaning of "any sub-domain", so: --upstream=[/*.host.com/]1.2.3.4 will send queries for *.host.com to 1.2.3.4, but host.com will be forwarded to default upstreams.

Examples

Sends queries for *.local domains to 192.168.0.1:53. Other queries are sent to 8.8.8.8:53.

./dnsproxy -u 8.8.8.8:53 -u [/local/]192.168.0.1:53

Sends queries for *.host.com to 1.1.1.1:53 except for *.maps.host.com which are sent to 8.8.8.8:53 (along with other queries).

./dnsproxy -u 8.8.8.8:53 -u [/host.com/]1.1.1.1:53 -u [/maps.host.com/]#

Sends queries for *.host.com to 1.1.1.1:53 except for host.com which is sent to 8.8.8.8:53 (along with other queries).

./dnsproxy -u 8.8.8.8:53 -u [/*.host.com/]1.1.1.1:53

EDNS Client Subnet

To enable support for EDNS Client Subnet extension you should run dnsproxy with --edns flag:

./dnsproxy -u 8.8.8.8:53 --edns

Now if you connect to the proxy from the Internet - it will pass through your original IP address's prefix to the upstream server. This way the upstream server may respond with IP addresses of the servers that are located near you to minimize latency.

If you want to use EDNS CS feature when you're connecting to the proxy from a local network, you need to set --edns-addr=PUBLIC_IP argument:

./dnsproxy -u 8.8.8.8:53 --edns --edns-addr=72.72.72.72

Now even if your IP address is 192.168.0.1 and it's not a public IP, the proxy will pass through 72.72.72.72 to the upstream server.

Bogus NXDomain

This option is similar to dnsmasq bogus-nxdomain. dnsproxy will transform responses that contain at least a single IP address which is also specified by the option into NXDOMAIN. Can be specified multiple times.

In the example below, we use AdGuard DNS server that returns 0.0.0.0 for blocked domains, and transform them to NXDOMAIN.

./dnsproxy -u 94.140.14.14:53 --bogus-nxdomain=0.0.0.0

CIDR ranges are supported as well. The following will respond with NXDOMAIN instead of responses containing any IP from 192.168.0.0-192.168.255.255:

./dnsproxy -u 192.168.0.15:53 --bogus-nxdomain=192.168.0.0/16

ShinyNito / dnsproxy