##SDK Version : ESP8266_RTOS_SDK_V1.4.2_16_07_04 ##Platform : ESP-LAUNCHER BOARD
##Operation Steps:
-
Enter path:/home/esp8266/Share, clone ESP8266 RTOS SDK to lubuntu environment by command:
git clone https://github.com/espressif/ESP8266_RTOS_SDK.git -
Enter SDK folder:/home/esp8266/Share/ESP8266_RTOS_SDK, Copy example folder "TCP_Server_Demo" next to bin/ folder in the SDK folder. The SDK folder should have folders inside it like : bin, examples, third party...
-
If the SDK path is not updated in gen_misc.sh, right click the script and edit the path to bin folder and SDK folder. for the current SDK, the gen_mish.sh would have a path like:
export SDK_PATH="/home/esp8266/Share/ESP8266_RTOS_SDK" export BIN_PATH="/home/esp8266/Share/ESP8266_RTOS_SDK/bin" -
Enter example folder, run ./gen_misc.sh, and follow below steps to finish the sample code compile:
Option 1 will be automatically selected, Option 2 > Enter 1. Option 3 > Enter Default(Just Press enter) Option 4 > Enter Default(Just Press enter) Option 5 > Enter 5. -
"user1.2048.new.5.bin" should be found in "/home/esp8266/Share/ESP8266_RTOS_SDK/bin/upgrade", Flash the Binaries with ESP Flashing tool at the instructed Locations. Download bin files to ESP-LAUNCHER as below sittings.
Download address of each bin files: blank.bin 0x1FE000 esp_init_data_default.bin 0x1FC000 boot_v1.5.bin 0x00000 user1.2048.new.5.bin 0x01000 Flash download tool settings: CrystalFreq: 26M SPI SPEED: 40MHz SPID MODE: QIO FLASH SIZE: 16Mbit-C11
##FOR VERIFY: UART0 print as below after boot up. Make sure that the Connect_AP part is successful.ESP_8266 will generate a Server IP, find this IP Address from the UART prints.Open any TCP Client Tool, configure the TCP to connect to port 1023 and the IP from the UART prints, The TCP client test is successful if the ESP_8266 could print the message:
?------TCP server CONNECT----------?