This is a simple tool for downloading all the available episodes in an RSS feed to disk, where they can be listened to offline.
Firstly, Python 3 must be installed, then the requirements must be installed. These are documented in requirements.txt and can be installed via the command python3 -m pip install -r requirements.txt.
Following are the arguments that can be supplied to the program:
destinationis the directory that the folder structure will be created in and the podcasts downloaded to-f, --feedis the URL for the RSS feed of the podcast-o, --opmlis the location of an OPML file with podcast data--fileis the location of a simple text file with an RSS feed URL on each line-l, --limitis the maximum number of episodes to try and download from the feed; if left blank, it is all episodes, but a small number is fastest for updating a feed-m, --max-downloadswill limit the number of episodes to be downloaded to the specified integer-w, --write-listis the option to write an ordered list of the episodes in the podcast in several different formats, as specified:nonetextaudaciousm3u
-t, --threadsis the number of threads to run concurrently; defaults to 10--max-attemptswill specify the number of reattempts for a failed or refused connection; see below for more details
The following arguments alter the functioning of the program in a major way e.g. they do not download:
--skip-downloadwill do everything but download the files; useful for updating episode playlists without a lengthy download--verifywill scan existing files for ones with a file-size outside a 2% and list them inresults.txt--update-tagswill download episode information and write tags to all episodes already downloaded
The following arguments alter the verbosity and logging behaviour:
-s, --suppress-progresswill disable all progress bars-v, --verbosewill increase the verbosity of the information output to the console--logwill log all messages to a debug level (the equivalent of-v) to the specified file, appending if it already exists
The --feed, --file, and --opml flags can all be specified multiple times to aggregate feeds from multiple locations.
Of these, only the destination is required, though one or more feeds or one or more OPML files must be provided or the program will just complete instantly.
In some cases, particularly when downloading a single or a few specific podcasts with a lot of episodes at once, the remote server will receive a number of simultaneous or consecutive requests. As this may appear to be atypical behaviour, this server may refuse or close incoming connections as a rate-limiting measure. This is normal in scraping servers that do not want to be scraped.
There are several countermeasures in the downloader for this behaviour, such as randomising the download list to avoid repeated calls to the same server in a short amount of time, but this may not work if there is only one or a few podcast feeds to download. As such, the method of last resort is a sleep function to wait until the server allows the download to continue. This is done with increasing increments of 30 seconds, with the maximum number or reattempts specified by the --max-attempts argument. For example, if left at the default of 10, the program will sleep for 30 seconds if the connection is refused. Then, if it was refused again, it will sleep for 60 before reattempting the download. It will do this until the 10th attempt, where it will sleep for 300 seconds, or five minutes. If the connection is refused after this, then an error will occur and the download thread will move on to the next podcast episode.
The maximum number of reattempts may need to be changed in several cases. If you wish to download the episode regardless of anything else, then you may want to increase the argument. This may result in longer wait times for the downloads to complete. However, a low argument will make the program skip downloads if they time out repeatedly, missing content but completing faster.
The --write-list option should not be used with the --limit option. The limit option will be applied to the episode list in whatever format chosen, and this will overwrite any past episode list files. For example, if a --limit of 5 is chosen with -w audacious, then the exported Audacious playlist will only be 5 items long. Thus the -w option should only be used when there is not a limit.
The downloader has basic tag writing support. It will write ID3 tags to MP3 files and iTunes-compatible tags to m4a and MP4 files. The information written is as follows:
- The episode title
- The podcast title
- The publishing date and time of the episode
- The description accompanying the episode
- The episode number (if available)
Following is an example command to download a single feed to a podcasts folder.
python3 -m podcastdownloader media/podcasts --f 'http://linustechtips.libsyn.com/wanshow' -o podcasts.opml
A feed file, for use with the --file option, is a simple text file with one URL that leads to the RSS feed per line. The podcastdownloader will ignore all lines beginning with a hash (#), as well as empty lines to allow comments and a rudimentary structure if desired. Additionally, comments can be appended to the end of a line with a feed URL. As long as there is a space between the hash and the end of the URL, it will be removed when the file is parsed.