ScratMan / HASmartThermostat

Smart Thermostat with PID controller for HomeAssistant

ScratMan/HASmartThermostat Issues

heater is always required: cooler only setup
Updated a month ago1
Keep_alive not working
Updated a month ago5
heater: Referenced entities are missing or not currently available
Closed a month ago5
Integration of HASmartThermostat with Homematic IP Thermostats and Zigbee Outlet
Updated 2 months ago1
Still heating after setpoint is reached
Closed 2 months ago2
pid_i stuck at 100 after a blackout
Closed 2 months ago9
Won't install using HACS
Closed 2 months ago1
How to set heater control output to be an integer and how to set a max value (ex: 99 and not 100)
Closed 2 months ago1
Deprecation warning
Closed 2 months ago2
Failsafe don't work when sensor not available / output_safety & sensor_stall
Updated 3 months ago1
Integration version in manifest.json is out of sync with actual version
Closed 4 months ago1
Feature request - Multiple heater entities
Closed 4 months ago2
specific configuration seems to be ignored
Closed 4 months ago2
thermostat in off mode still controlls devices
Closed 4 months ago1
Handling of heater control device connectivity issues - Heater controller stays on
Updated 5 months ago2
pwm timeout boiler run
Closed 6 months ago
pid_i should not be capped to zero from below
Closed 6 months ago13
All entities are unavailable after update
Closed 6 months ago4
Parameters cannot be changed retrospectively (away_temp, sleep_temp; home_temp; eco_Themp)
Closed 6 months ago5
If 'ke' is in use make it possible to let 'i'<0
Closed 6 months ago2
HA 2024.2 log warning
Closed 6 months ago1
Error at startup with valve. PID P stays 0 from debug
Closed 6 months ago2
could not convert string to float: 'off'
Closed 6 months ago4
Compensate for other heat sources (instantly, without integral resettling)
Closed 6 months ago2
pid_p pid_d
Closed 6 months ago3
Problem with part D - value peaks
Updated 7 months ago12
Strange behaviour / boost preset / PID off
Closed a year ago5
Strange behavior with 2024.1 ha
Closed 7 months ago2
Restart autotune.
Updated 8 months ago
Cant update PID values
Closed 9 months ago5
Thermostat resetting to minimum value
Updated 9 months ago
Integral spike after thermostat being disabled for a while
Closed 9 months ago1
Boost mode enhancement
Updated 9 months ago
KD spiking due to erratic temperature sensors
Updated 9 months ago
Cannot use input number as heater entity
Closed 10 months ago2
Need fine setting for autotune
Updated 10 months ago
"Analogue" mode hvac_action is always idle
Closed 10 months ago2
Disabled thermostat turns off switch when manually turned on.
Closed a year ago8
Outdoor temperature as attribute
Closed a year ago1
dual PID
Closed a year ago1
Feature request - Addition of 0.01 precision
Closed a year ago1
Error in HA logs
Closed a year ago1
Using self.async_update_ha_state() without enabling force_update
Closed a year ago2
Warning in HA logs
Closed a year ago1
Generic setpoint control with appropriate units rather than temperature
Closed a year ago1
Warning in log file after update to Home Assistant 2023.5.0
Closed a year ago
pid_i is still an active attribute
Closed a year ago2
Invert Target and Current Temp doesn't work
Closed a year ago1
Negative control output
Closed a year ago1
PID_I not decreasing when target temp is much lower than current temp (night)
Closed a year ago4