SPINOGY macros for Eding CNC add two functions to the software, specifically adapted to the X22 spindles. With the warm-up and grease distribution run routines, the spindles are prepared for use exactly according to the manufacturer's plans.
Depending on the downtime or storage time and the storage or mounting position, a corresponding warmup or grease distribution run must be performed with the spindle. This ensures uniform bearing lubrication, which results in the bearing temperature being low, thus increasing grease and bearing life.
For more information, please refer to the operating instructions of your X22 spindle.
Open either the english or the german folder, depending on which language you prefer. In the folders you will find a detailed guide in the form of a pdf file, which contains all the necessary steps for the installation of the macros.
You can either download the latest version, or select any version in the release history.
SPINOGY is a manufacturer and system supplier of high-quality motor spindles and accessories.
SPINOGY doesn't assume liability for personal injuries, material damages, damages caused to the device and consequential damages caused by failure to follow the operating manual or improper use of this macro. Despite careful checking of the program code for correctness, unforeseen errors may occur. Therefore, the macro must be tested before use without the spindle connected.