Rubusch / DABDUINO

The DABDUINO is DAB/DAB+/FM Arduino shield with 32-bit, 384kHz PCM DAC (cinch) + Toslink optical digital audio output.

What is the DABDUINO?

The DABDUINO is good starting point for high quality DIY DAB/DAB+/FM home receiver project, car receiver or anything you want. Digital optical audio outout (Toslink) and 32-bit, 384kHz PCM DAC offers the same audio quality as expensive DAB/DAB+ receivers.

The DABDUINO is Arduino DAB/DAB+ (digital radio) + FM shield with 32-bit, 384kHz PCM DAC (cinch) + Toslink optical digital audio output. DABDUINO Library is designed specifically to work with the DABDUINO.

The library supports many functions for control DABDUINO and for access to broadcast data. For example - automatic station search and store stations in database, watching and reading DAB/DAB+ and FM station name, program type, information texts and data from DAB/DAB+/FM RDS, signal strength and quality, volume and stereo mode settings and many others. In near future I will add functions for access to media data from DAB/DAB+ stream. For example - images, etc.

Compatibility:

• Arduino (as shield): DUE, ZERO, M0, M0 PRO
• Arduino (wired): MKRZero, MRK1000

Generally all Arduino 3.3V boards (Arduino 5V boards only with level shifting)

• STM32 (as shield): Nucleo L476RG, Nucleo F091RC, Nucleo F103RB
• STM32 (wired): STM32F103C8T6

Generally all supported boards in stm32duino and Arduino_STM32

SPI is not needed for common operation (only for access to media data)

Bands:

• DAB/DAB+: BAND III, CHINA BAND, L-BAND
• FM: 87.5 - 108MHz

Input:

• RF (antenna): SMA connector, solder pads

Output:

• Analog audio: 32-bit, 384kHz PCM DAC - stereo cinch (golden), solder pads
• Digital audio: Toslink (optical)

Real Time Clock (RTC):

• on board, synchronised from DAB/DAB+ stream

Power:

• DABDUINO is powered only from Arduino pin heads. No need external power source.

How to connect (without pin headers)

Minimal wiring is ANTENNA (use correct band), TX, RX, (DABDUINO) RESET, GND, +5V.

How to install

Open library manager in Arduino IDE and install the DABDUINO library.

References

For command reference visit DABDUINO.cpp. Example is available here DABDUINO_example_1.ino.

Where to buy the DABDUINO?

Currently unavailable

Dabduino is dispatched without pin headers and SMA for easier installation in custom devices.

Have some problem or questions?

Send me email :)

Final DABDUINO

Second prototype video

First prototype video

Pinout