tio is a simple serial device tool which features a straightforward command-line and configuration file interface to easily connect to serial TTY devices for basic I/O operations.
To make a simpler serial device tool for talking with serial TTY devices with less focus on classic terminal/modem features and more focus on the needs of embedded developers and hackers.
tio was originally created to replace screen for connecting to serial devices when used in combination with tmux.
- Easily connect to serial TTY devices
- Automatic connect
- Support for arbitrary baud rates
- List available serial devices
- Show RX/TX statistics
- Toggle serial lines
- Local echo support
- Remap special characters (nl, cr-nl, bs, etc.)
- Line timestamps
- Support for delayed output
- Hexadecimal mode
- Log to file
- Autogeneration of log filename
- Configuration file support
- Activate sub-configurations by name or pattern
- Redirect I/O to socket for scripting or TTY sharing
- Pipe input and/or output
- Bash completion
- Color support
- Man page documentation
The command-line interface is straightforward as reflected in the output from 'tio --help':
Usage: tio [<options>] <tty-device|sub-config>
Connect to tty-device directly or via sub-configuration.
Options:
-b, --baudrate <bps> Baud rate (default: 115200)
-d, --databits 5|6|7|8 Data bits (default: 8)
-f, --flow hard|soft|none Flow control (default: none)
-s, --stopbits 1|2 Stop bits (default: 1)
-p, --parity odd|even|none Parity (default: none)
-o, --output-delay <ms> Character output delay (default: 0)
-n, --no-autoconnect Disable automatic connect
-e, --local-echo Enable local echo
-t, --timestamp Enable line timestamp
--timestamp-format <format> Set timestamp format (default: 24hour)
-L, --list-devices List available serial devices
-l, --log Enable log to file
--log-file <filename> Set log filename
--log-strip Strip control characters and escape sequences
-m, --map <flags> Map special characters
-c, --color 0..255|none|list Colorize tio text (default: 15)
-S, --socket <socket> Redirect I/O to socket
-x, --hexadecimal Enable hexadecimal mode
-v, --version Display version
-h, --help Display help
Options and sub-configurations may be set via configuration file.
In session, press ctrl-t q to quit.
See the man page for more details.
By default tio automatically connects to the provided TTY device if present.
If the device is not present, it will wait for it to appear and then connect.
If the connection is lost (eg. device is unplugged), it will wait for the
device to reappear and then reconnect. However, if the --no-autoconnect
option is provided, tio will exit if the device is not present or an
established connection is lost.
tio features full bash autocompletion.
Various in session key commands are supported. When tio is started, press ctrl-t ? to list the available key commands.
[20:19:12.040] Key commands:
[20:19:12.040] ctrl-t ? List available key commands
[20:19:12.040] ctrl-t b Send break
[20:19:12.040] ctrl-t c Show configuration
[20:19:12.040] ctrl-t d Toggle DTR line
[20:19:12.040] ctrl-t e Toggle local echo mode
[20:19:12.040] ctrl-t h Toggle hexadecimal mode
[20:19:12.040] ctrl-t l Clear screen
[20:19:12.040] ctrl-t L Show line states
[20:19:12.040] ctrl-t q Quit
[20:19:12.040] ctrl-t r Toggle RTS line
[20:19:12.041] ctrl-t s Show statistics
[20:19:12.041] ctrl-t t Send ctrl-t key code
[20:19:12.041] ctrl-t T Toggle line timestamp mode
[20:19:12.041] ctrl-t v Show version
Options can be set via the configuration file first found in any of the following locations in the order listed:
- $XDG_CONFIG_HOME/tio/tiorc
- $HOME/.config/tio/tiorc
- $HOME/.tiorc
The configuration file supports sub-configurations using named sections which can be activated via the command-line by name or pattern.
Example configuration file:
# Defaults
baudrate = 115200
databits = 8
parity = none
stopbits = 1
color = 10
[ftdi]
tty = /dev/serial/by-id/usb-FTDI_TTL232R-3V3_FTGQVXBL-if00-port0
baudrate = 9600
no-autoconnect = enable
log = enable
log-file = ftdi.log
color = 12
[usb devices]
pattern = usb([0-9]*)
tty = /dev/ttyUSB%s
color = 13
To use a specific sub-configuration by name simply start tio like so:
$ tio ftdi
Or by pattern match:
$ tio usb12
Packages for various GNU/Linux distributions are available. Please consult your package manager tool to find and install tio.
If you would like to see tio included in your favorite distribution, please reach out to their package maintainers team.
Install latest stable version:
$ snap install tio
Install bleeding edge:
$ snap install tio --edge
The latest source releases can be found here.
Install steps:
$ meson build
$ meson compile -C build
$ meson install -C build
See meson_options.txt for tio specific build options.
Note: Please do no try to install from source if you are not familiar with how to build stuff using meson.
tio is open source. If you want to help out with the project please feel free to join in.
All contributions (bug reports, code, doc, ideas, etc.) are welcome.
Please use the github issue tracker and pull request features.
Also, if you find this free open source software useful please feel free to consider making a donation of your choice:
Submit bug reports via GitHub: https://github.com/tio/tio/issues
Visit tio.github.io
tio is GPLv2+. See LICENSE file for more details.
Created by Martin Lund <martin.lund@keep-it-simple.com>
See the AUTHORS file for full list of contributors.