Robopoly's repositories
Robopoly_Bluetooth
Library for the Bluetooth module on the PRismino shield
Robopoly_PRismino
Library for the Robopoly PRismino and the Robopoly Shield
PRismeLedDriver
LED driver project in the showcase.
RobopolyControlCenter
Show output of sensors and ports on a graphical user interface from the PRismino.
Stand-alone-ISP-Programmer-for-Arduino
Sketch to upload initial code and bootloader to empty AVR micro-controllers.
AlimBoardV2
New board for a new step down regulator for the kitPrisme. The stepDown chip is not a QFN and can now be soldered by hand. Current output is 2A
Automate_Reflow_Oven
Repurpous an old kitchen oven as a reflow oven to solder larger batches of PCBs and PCBs with numerous SMDs componants
Bras_Moveo
Code source pour le bras MOVEO assemblé à robopoly
camLin-firmware
Driver for the robopoly linear camera
FlatCAM_config
File(s) for configuring FlatCAM to use it to mill different types of things. Primarily PCBs
Nunchuck-control
A simple Nunchuck-controlled robot
Power-Board
Power board files to be used with the PRismino and Robopoly Shield
Robopoly-LedMatrix
Robopoly led matrix control system
Robopoly-Shield
Robopoly shield to be used with PRismino
Robopoly_Encoders
Library for the use of quadrature encoders with Robopoly's kit PRisme.
Robopoly_Linear_Camera
Library to get data from the Robopoly Linear Camera
Variometer
Un variometre codé en arduino