A library built to provide support for defining service health for golang services. It allows you to register async health checks for your dependencies and the service itself, and provides a health endpoint that exposes their status.
The project is named after the German word Gesundheit
which means ‘health’, and it is pronounced /ɡəˈzʊntˌhaɪ̯t/
.
Using go modules:
go get github.com/AppsFlyer/go-sundheit@v0.2.0
Using dep:
dep ensure -add github.com/AppsFlyer/go-sundheit@v0.2.0
import (
"net/http"
"time"
"log"
"github.com/pkg/errors"
"github.com/AppsFlyer/go-sundheit"
healthhttp "github.com/AppsFlyer/go-sundheit/http"
"github.com/AppsFlyer/go-sundheit/checks"
)
func main() {
// create a new health instance
h := health.New()
// define an HTTP dependency check
httpCheckConf := checks.HTTPCheckConfig{
CheckName: "httpbin.url.check",
Timeout: 1 * time.Second,
// dependency you're checking - use your own URL here...
// this URL will fail 50% of the times
URL: "http://httpbin.org/status/200,300",
}
// create the HTTP check for the dependency
// fail fast when you misconfigured the URL. Don't ignore errors!!!
httpCheck, err := checks.NewHTTPCheck(httpCheckConf)
if err != nil {
fmt.Println(err)
return // your call...
}
// Alternatively panic when creating a check fails
httpCheck = checks.Must(checks.NewHTTPCheck(httpCheckConf))
err = h.RegisterCheck(&health.Config{
Check: httpCheck,
InitialDelay: time.Second, // the check will run once after 1 sec
ExecutionPeriod: 10 * time.Second, // the check will be executed every 10 sec
})
if err != nil {
fmt.Println("Failed to register check: ", err)
return // or whatever
}
// define more checks...
// register a health endpoint
http.Handle("/admin/health.json", healthhttp.HandleHealthJSON(h))
// serve HTTP
log.Fatal(http.ListenAndServe(":8080", nil))
}
The library comes with a set of built-in checks. Currently implemented checks are as follows:
The HTTP check allows you to trigger an HTTP request to one of your dependencies, and verify the response status, and optionally the content of the response body. Example was given above in the usage section
The DNS checks allow you to perform lookup to a given hostname / domain name / CNAME / etc, and validate that it resolves to at least the minimum number of required results.
Creating a host lookup check is easy:
// Schedule a host resolution check for `example.com`, requiring at least one results, and running every 10 sec
h.RegisterCheck(&health.Config{
Check: checks.NewHostResolveCheck("example.com", 200*time.Millisecond, 1),
ExecutionPeriod: 10 * time.Second,
})
You may also use the low level checks.NewResolveCheck
specifying a custom LookupFunc
if you want to to perform other kinds of lookups.
For example you may register a reverse DNS lookup check like so:
func ReverseDNLookup(ctx context.Context, addr string) (resolvedCount int, err error) {
names, err := net.DefaultResolver.LookupAddr(ctx, addr)
resolvedCount = len(names)
return
}
//...
h.RegisterCheck(&health.Config{
Check: checks.NewResolveCheck(ReverseDNLookup, "127.0.0.1", 200*time.Millisecond, 3),
ExecutionPeriod: 10 * time.Second,
})
The ping checks allow you to verifies that a resource is still alive and reachable.
For example, you can use it as a DB ping check (sql.DB
implements the Pinger interface):
db, err := sql.Open(...)
dbCheck, err := checks.NewPingCheck("db.check", db, time.Millisecond*100)
_ = h.RegisterCheck(&health.Config{
Check: dbCheck,
// ...
})
You can also use the ping check to test a generic connection like so:
pinger := checks.NewDialPinger("tcp", "example.com")
pingCheck, err := checks.NewPingCheck("example.com.reachable", pinger, time.Second)
h.RegisterCheck(&health.Config{
Check: pingCheck,
// ...
})
The NewDialPinger
function supports all the network/address parameters supported by the net.Dial()
function(s)
The library provides 2 means of defining a custom check.
The bottom line is that you need an implementation of the checks.Check
interface:
// Check is the API for defining health checks.
// A valid check has a non empty Name() and a check (Execute()) function.
type Check interface {
// Name is the name of the check.
// Check names must be metric compatible.
Name() string
// Execute runs a single time check, and returns an error when the check fails, and an optional details object.
Execute() (details interface{}, err error)
}
See examples in the following 2 sections below.
The checksCustomCheck
struct implements the checks.Check
interface,
and is the simplest way to implement a check if all you need is to define a check function.
Let's define a check function that fails 50% of the times:
func lotteryCheck() (details interface{}, err error) {
lottery := rand.Float32()
details = fmt.Sprintf("lottery=%f", lottery)
if lottery < 0.5 {
err = errors.New("Sorry, I failed")
}
return
}
Now we register the check to start running right away, and execute once per 2 minutes:
h := health.New()
...
h.RegisterCheck(&health.Config{
Check: &checks.CustomCheck{
CheckName: "lottery.check",
CheckFunc: lotteryCheck,
},
InitialDelay: 0,
ExecutionPeriod: 2 * time.Minute,
})
Sometimes you need to define a more elaborate custom check.
For example when you need to manage state.
For these cases it's best to implement the checks.Check
interface yourself.
Let's define a flexible example of the lottery check, that allows you to define a fail probability:
type Lottery struct {
myname string
probability float32
}
func (l Lottery) Execute() (details interface{}, err error) {
lottery := rand.Float32()
details = fmt.Sprintf("lottery=%f", lottery)
if lottery < l.probability {
err = errors.New("Sorry, I failed")
}
return
}
func (l Lottery) Name() string {
return l.myname
}
And register our custom check, scheduling it to run after 1 sec, and every 30 sec:
h := health.New()
...
h.RegisterCheck(&health.Config{
Check: Lottery{myname: "custom.lottery.check", probability:0.3,},
InitialDelay: 1*time.Second,
ExecutionPeriod: 30*time.Second,
})
- If a check take longer than the specified rate period, then next execution will be delayed, but will not be concurrently executed.
- Checks must complete within a reasonable time. If a check doesn't complete or gets hung, the next check execution will be delayed. Use proper time outs.
- A health-check name must be a metric name compatible string
(i.e. no funky characters, and spaces allowed - just make it simple like
clicks-db-check
). See here: https://help.datadoghq.com/hc/en-us/articles/203764705-What-are-valid-metric-names-
The library provides an HTTP handler function for serving health stats in JSON format. You can register it using your favorite HTTP implementation like so:
http.Handle("/admin/health.json", healthhttp.HandleHealthJSON(h))
The endpoint can be called like so:
~ $ curl -i http://localhost:8080/admin/health.json
HTTP/1.1 503 Service Unavailable
Content-Type: application/json
Date: Tue, 22 Jan 2019 09:31:46 GMT
Content-Length: 701
{
"custom.lottery.check": {
"message": "lottery=0.206583",
"error": {
"message": "Sorry, I failed"
},
"timestamp": "2019-01-22T11:31:44.632415432+02:00",
"num_failures": 2,
"first_failure_time": "2019-01-22T11:31:41.632400256+02:00"
},
"lottery.check": {
"message": "lottery=0.865335",
"timestamp": "2019-01-22T11:31:44.63244047+02:00",
"num_failures": 0,
"first_failure_time": null
},
"url.check": {
"message": "http://httpbin.org/status/200,300",
"error": {
"message": "unexpected status code: '300' expected: '200'"
},
"timestamp": "2019-01-22T11:31:44.632442937+02:00",
"num_failures": 4,
"first_failure_time": "2019-01-22T11:31:38.632485339+02:00"
}
}
Or for the shorter version:
~ $ curl -i http://localhost:8080/admin/health.json?type=short
HTTP/1.1 503 Service Unavailable
Content-Type: application/json
Date: Tue, 22 Jan 2019 09:40:19 GMT
Content-Length: 105
{
"custom.lottery.check": "PASS",
"lottery.check": "PASS",
"my.check": "FAIL",
"url.check": "PASS"
}
The short
response type is suitable for the consul health checks / LB heath checks.
The response code is 200
when the tests pass, and 503
when they fail.
It is sometimes desired to keep track of checks execution and apply custom logic. For example, you may want to add logging, or external metrics to your checks, or add some trigger some recovery logic when a check fails after 3 consecutive times.
The health.CheckListener
interface allows you to hook this custom logic.
For example, lets add a logging listener to our health repository:
type checkEventsLogger struct{}
func (l checkEventsLogger) OnCheckStarted(name string) {
log.Printf("Check %q started...\n", name)
}
func (l checkEventsLogger) OnCheckCompleted(name string, res health.Result) {
log.Printf("Check %q completed with result: %v\n", name, res)
}
Please note that your CheckListener
implementation must not block!
The library exposes the following OpenCensus view for your convenience:
health/check_status_by_name
- An aggregated health status gauge (0/1 for fail/pass) at the time of sampling. The aggregation uses the following tags:check=allChecks
- all checks aggregationcheck=<check-name>
- specific check aggregation
health/check_count_by_name_and_status
- Aggregated pass/fail counts for checks, with the following tags:check=allChecks
- all checks aggregationcheck=<check-name>
- specific check aggregationcheck-passing=[true|false]
health/executeTime
- The time it took to execute a checks. Using the following tag:check=<check-name>
- specific check aggregation
The views can be registered like so:
import (
"github.com/AppsFlyer/go-sundheit"
"go.opencensus.io/stats/view"
)
h := health.New()
// ...
view.Register(health.DefaultHealthViews...)
// or register individual views. For example:
view.Register(health.ViewCheckExecutionTime, health.ViewCheckStatusByName, ...)