A collection of functions to help with realtime audio processing.
Quite basic uses sounddevice for device input and output but any other audio device lib should work just fine.
Clipper.py - Applies clipping to an audio signal with a settable threshold default is -3dB
:param input_audio: The input audio signal.
:param threshold: Clipping threshold (default is -3 dB).
:return: The clipped audio signal.
Limiter.py - Applies limiting to an audio signal with a settable threshold defualt is -3dB
:param input_audio: The input audio signal.
:param threshold: Limiting threshold (default is -3 dB).
:return: The limited audio signal.
Compression.py - Applies compression to an audio signal.
:param input_audio: The input audio signal.
:param ratio: Compression ratio (default is 2).
:param threshold: Compression threshold (default is -24 dB).
:param attack: Attack time (default is 0.01 seconds).
:param release: Release time (default is 0.1 seconds).
:return: The compressed audio signal.
Tapedelay.py - Applies a tape delay effect with settable feedback & mix
:param input_audio: The input audio signal.
:param delay_samples: Number of delay samples.
:param feedback: Feedback gain (default is 0.5).
:param mix: Wet/dry mix (default is 0.5).
:return: The audio signal with the tape delay effect applied.
Ill be adding more as i make them use them however you see fit!