Description
This tool can be used to encrypt your Linux system post-installation without losing data.
1.0: Pre-Setup
Required Packages
The package: cryptsetup is required. You must install this package on the target system before encrypting.
sudo apt update
sudo apt install cryptsetup
You must also be using initramfs-tools as your initramfs generation utility. Debian and Debian-based systems rely on initramfs-tools to generate their initramfs. If you do not have initramfs-tools installed, or are NOT on a Debian or Debian-based system, then this script is not recommended.
Obtain Clonezilla
You cannot encrypt your system while it is in use, so you need to boot from a USB in-order to run this script. It is recommended that you use Clonezilla as it is the OS where the script is tested on. This way you can be sure the system has all the required dependencies.
If you need an image writer you can download RosaImageWriter.
Setup Clonezilla Environment
Boot into the Clonezilla terminal. This can be done by selecting Enter_shell when prompted.
By default Clonezilla will not have networking enabled. To enable networking run:
sudo systemctl start NetworkManager
If you are not on a wired connection use the following to setup WIFI:
nmtui
2.0: Usage
./SimpleEncryptionSetup.sh -fvh -p 'partition1:mountpoint1[ partitionN:mountpointN]' -r root-partition [-e efi-partition {-d DIR}]
-p, --partitions 'partition1:mountpoint1[ partitionN:mountpointN]' Specify the partition(s) to encrypt.
Example: '/dev/sda1:/ /dev/sda2:/home'
-r, --root <root-partition> The root partition. This can be either
/dev/sd*, or if using LVM /dev/mapper/<root-name>.
Example: /dev/sda1
-e, --efi <efi-partition> Specify the EFI partition.
Example: /dev/sda3
-d, --efi-path <DIR> The directory in /mnt/boot/efi/EFI/ where
grub will be installed. This directory MUST
already exist. If lost, 'ls' the directories
in said EFI path and find a file named grubx64.efi,
if the directory contains that file it's probably
the right one. This directory is also used as the
bootloader-id.
Example: ubuntu
-f, --fake Do not make modifications to the system. This is used
to check the output for errors *before* modifying
the system.
-v, --version Print version information then exit.
-h, --help Print this help page then exit.