Binary files for ESP32S3 Linux 6.5+
- grab thea files with
docker cp CONTAINER_NAME:/app/build/release/\* . - now you can burn the files from the 'release' folder with:
python esptool.py --chip esp32s3 -p /dev/ttyUSB0 -b 921600 --before=default_reset --after=hard_reset write_flash 0x0 bootloader.bin 0x10000 network_adapter.bin 0x8000 partition-table.bin- next we can burn in the kernel and filesys with parttool, which is part of esp-idf
parttool.py write_partition --partition-name linux --input xipImageparttool.py write_partition --partition-name rootfs --input rootfs.cramfsparttool.py write_partition --partition-name etc --input rootfs.jffs2
| Name | Type | SubType | Offset | Size | Flags |
|---|---|---|---|---|---|
| nvs | data | nvs | 0xa000 | 20K | |
| phy_init | data | phy | 0xf000 | 4K | |
| factory | app | factory | 0x10000 | 640K | |
| etc | 64 | 1 | 0xb0000 | 448K | |
| linux | 64 | 0 | 0x120000 | 3456K | |
| rootfs | 64 | 1 | 0x480000 | 3584K |