Rave-Saber / AVR-APA102-library

A library for driving APA102 LED Strips with an AVR Chip's Hardware SPI.

AVR APA102 Library

This is a simple C library for driving a strip of APA102 LEDs using the hardware SPI on an AVR microcontroller.

The apa102 module contains the basic functions you need to control LEDS - initializing the SPI peripherals & sending start, LED, & end frames in the proper format.

The rest of this library is still in active development & subject to change.

There are functions to render color patterns like flashes, ribbons, scrolling, extension, & retraction.

The apa102_simple_effects module renders colors directly to the LED strip and contains limited functionality. For example, the extension/retraction effects only support solid colors.

The apa102_patterns module contains more patterns, pattern chaining, & the ability to define custom patterns. It supports extension & retraction for any pattern type.

Usage

You need to define some macro's to use this library:

• SCK_DDR
• SCK
• MOSI_DDR
• MOSI_PORT
• MOSI
• SS_DDR
• SS_PORT
• SS
• LED_COUNT

The pin defines should be for the HW SPI pins of your AVR microcontroller. This library does not support using arbitrary I/O pins.

Then just include the src folder in your compilation process:

avr-gcc -I /path/to/this/repo/src ...

You can check out the example code which has been tested with both a Sparkfun Lumenati 8-LED strip & DotStar 144 LED/m strip using an Atmel ATmega168a microcontroller. To build the hex file, run make all. To build & flash the code using a USBtinyISP, run make flash.

Additional Features

There are several optional features that can be enabled by defining macros.

Define the STARTING_LED macro to shift the first lit LED down the strip. You should have at least LED_COUNT + STARTING_LED - 1 LEDs in your strip.

Define the CURRENT_LIMIT macro to limit the amount of current used by the strip. This exposes scaling functions in apa102.h and causes the simple effects & patterns modules to automatically scale any colors passed to them.

TODO

• Pattern for rendering images
  • Make a pattern for fixed arrays of colors
  • Script to convert images to xpm, transpose rows/cols, & print array for inclusion in patterns file.
• Use timer for delays instead of relying on delay functions?
  • Make it a compilation option in case no free timers? Or method that can re-use existing timer with different interrupt/ms rates.
  • Maybe just implement in firmware & example and have library continue to return delay amounts.
• Modify extension/retraction delay so it's only used for the LED (de)activation rate - respect the pattern step's delay amount for stepping through the pattern. I.e., blade size changes with extension delay, colors change with pattern delay.
• Allow nesting of SERIES patterns.
  • Would make re-using sequence transitions easier
  • Probably need to make series step globals into struct. Pause playback of parent series while playing sub-series.
  • Dynamic array to track all series/sub-series structs up to current depth?
• Pattern for rendering text
  • Need to scale font to LED_COUNT
  • Option for setting foreground/background colors, maybe color sequences or a background GenericPattern
• Make current_sequence array in apa102_patterns available to library consumers? Either by exposing the array or functions to modify it.
• Support assigning different patterns to specific LED ranges
  • E.g., rgb ribbon at ends, rgb flash in center
  • Probably requires re-writing patterns module to calculate single LED colors based on both step count and LED index. Is that too performance intensive?
  • Or pass the array pointer & led length to each pattern instead of using the current_sequence & LED_COUNT globals. That would allow offsetting & shrinking patterns.
  • How to handle patterns with different step counts & delays?
• More effects!
  • scrolling effect that fades the color bands instead of repeating them
  • fixed number of scrolling bands
  • static repeating bands with fixed width or count - ribbon & flash
• Add an RGBAColor type that uses the alpha level to scale the RGB channels instead of the APA102's "brightness" bits(since those introduce stuttering).

References

• Understanding the APA102 "Superled"

License

GPL-3.0