Jack Wang's repositories
STM32F103C8T6_CMSIS-DAP_SWO
CMSIS-DAP SWO CDC STM32F103C8T6 BluePill STLINK ARM Debugger
CMSIS-DAP_for_STLINK-V3MINI
High-Speed CMSIS-DAP for STLINK-V3MINI ARM Debugger STM32F723IEK6
Yet_Another_Bootloader
This Yet Another Bootloader (YAB) is for STM32, STM32F103, STM32F407, STM32L433, STM32F723, STLINK-V3, STLINK-V3MINI, CMSIS-DAP.
STM32_HAL_retarget_printf
Retarget the printf function, sample projects for STM32 HAL under MDK/Keil, 4 methods in one ... ...
stm32f103_dual_vcp
An example to show how to use dual CDC VCP USB interfaces.
STLinkV3_Adapter
This adapter board was designed to retain the STDC14 connector from stlinkv3-mini.
STM32_I2C_Scanner
STM32 I2C scanner with USB CDC interface
STM32F103_MSD_BOOTLOADER
STM32F103 Mass Storage Device Bootloader
EFRConnect-android-variant
EFRConnect-android, EFR Connect, Bluegecko, Bluetooth BLE, EFR32, SiliconLabs
STM32F103_1VCP-3UART
STM32F103 Bluepill， All 3 UART Rx, go to 1 USB-VCP. Monitoring other UARTs Rx/Tx lines, use 1 terminal window only.
luci-app-serial2mqtt
OpenWrt LuCI config template for serial2mqtt or any other LuCI app, as a Hello World starting point.
openwrt-serial2mqtt
OpenWrt Package, Serial Port, UART, MQTT, using paho.mqtt.c
serial2mqtt
Implement a Linux gateway that reads serial port ( USB, serial , bluetooth) commands and transfers to MQTT host. MQTT without ethernet or Wifi on a low cost micocontroller. Don't develop a serial command interface , just use MQTT UI's and features.