RIAEvangelist / SCv2-sketches

Sketches for SCv2

SCv2-sketches

Sketches for SCv2

The primary sketch for productiuon is the load share

Licensed under MIT license

See the modified MIT license file.

Primary Code Functionality

• Calculates and shares target wattage among upto 3 SCv2 modules
• normalizes output power
• normalizes output voltage
• defaults to 6600.00 watts target charge rate from station
• stores new target charge rate to eeprom when modified by user via api
• starts up with target charge rate wattage from eeprom or defualt if not set
• ramps up at 50 watts per second
• ramps down instantly
• cuts charge rate back to 75% of target wattage over 113.5v if over 1800.00 watts

API COMMANDS

Version 2 of the API accepts one command, change target wattage * 100 Every command must be ended by a newline char of \n

1kw = 100000 you can look at this as 1000.00 watts

API PUSHED DATA

    //battery volts
    Serial.print(volts);
    Serial.print(",");

    //total charging amps
    Serial.print(amps);
    Serial.print(",");

    //total charging amps per charger
    Serial.print(amps/chargerCount);
    Serial.print(",");

    //charger count
    Serial.print(chargerCount);
    Serial.print(",");

    //target watts
    Serial.print(watts);
    Serial.print(",");

    //target max watts
    Serial.print(MAX_STATION_WATTS);
    Serial.print(",");

    //target total amps
    Serial.print(chargingAmps*chargerCount);
    Serial.print(",");

    //target amps per charger
    Serial.print(chargingAmps);

    //start extending with a comma
    Serial.print(",");

    //print api version
    Serial.println(VERSION);