Ever wanted to work with FPGA, and connect to DDR and PCI express without spending a small fortune?
NiteFury and Litefury are compact, full-featured FPGA developement boards featuring a decent size FGPA, DDR3, and PCI express connectivity in a small form factor, for a low price.
- Xilinx FPGA
- Onboard DDR3 with 1.6GB/s bandwidth
- Onboard configuration flash (S25FL series)
- PCIe x4 gen 2 interface to FGPA (2GB/s)
- IO: 4x LVDS pairs and 4 general purpose
- 4 user controlled LEDs
- External I/O via I/O connector: 12 Total, 4 selectable analog or digital
- External I/O via PCIe connector: 1x 3.3V digital I/O (LED), SMBus
- 10W VCCINT supply
- Dimensions: 22x80x28mm
| Feature | Nitefury-II | Litefury |
|---|---|---|
| FPGA | XC7A200T-2FBG484E | XC7A100T-L2FGG484E |
| RAM | 1GB DDR3-800 | 512MB DDR3-800 |
| Flash | 256Mb | 128Mb, 256Mb |
- RHS Research store
- [Amazon Litefury] (https://www.amazon.com/dp/B08BKSVJH5)
- [Amazon Nitefury] (https://www.amazon.com/dp/B0B9FMBF6C)
If you have the original, single-connector JTAG adapter, it only works with the "white" JTAG cable. As shown here
If you have the new dual-connector JTAG adapter, be careful to connect the cable properly. If you have a white JTAG cable, it will connect to the connector labelled "WHT" If you have a black JTAG cable, it will connect to the connector labelled "BLK"
As shown:
