Plot Clock

There is a video associated with this repo, I highly recommend you watch it if you are going to use this repo.

Please note, the original idea of this robot is by Joo, which can be found here.

Components needed

First you need to install these libraries:
- ESP32Servo, Encoder, DS3231, Button.
- They can be installed directly from the Arduino library manager.
Ensure the servo and rotary pin numbers match your connections.
Once you have chosen the correct pin numbers, upload the code.
The robot arm needs to make 90 degree movements. Please refer to the video to see exactly how to calibrate the robot arm.
Once calibrated, change the currentMode variable to 1 (or press left most encoder), which will turn it to manual control where you can control the arms using the three rotary encoders.
Check if everything is working properly. Once you the robot is making expected movements, then press the left most encoder and it will go to automatic mode(2) where it will erase and draw the time every minute.
If any of this is not clear, I highly recommend watching the video.

Keep in mind, you also need to calibrate the real time clock. To do this, open up the DS3231 > DS3231_set example in the Arduino IDE.
Upload the code.
Once uploaded, open up the serial monitor and enter the date and time in this format YYMMDDwHHMMSSx and press enter.
- For example 210602w174612x.
Now your RTC is calibrated, and as long as you have the coin battery attached, it will keep track of the time.

Please refer to the /3d_models directory.

To easily see how all parts fit together, please preview the 3d_models/plotclock_model.skp file.