Peyet / NUC8i5BEH

NUC8i5BEH Hackintosh

NUC8I5BEH Hackintosh (OpenCore)

English | 简体中文

Supported macOS versions

• macOS Mojave 10.14.6
• macOS Catalina 10.15.7
• macOS Big Sur 11.6.1（which I'm using now）
• macOS Monterey 12.x

Config

• OS: macOS Catalina 11.6.1 20G224 x86_64 / Macmini8,1
• OpenCore: 0.7.5
• CPU: Intel® Core™ i5-8259U Processor (6M Cache, up to 3.80 GHz)
• SSD: 500GB KONKA K550
• RAM: 8GB x 2 ADATA DDR4 2666
• BIOS: 0078
• Monitor: KOIOS K2721UD 4K 27

BIOS Settings

• Disable
  • Legacy Boot
  • Fast Boot
  • Network Boot
  • Secure Boot
  • Inter VT for directed I/VO(VT-d)
• Enable
  • Boot USB Devices First
  • Boot Network Devices Last
• Wake on LAN from S4/S5
  • Stay Off

How to install

1. Put EFI and NUC8_MacOnlineInstaller into a Fat 32 format USB flash driver's root directory
2. Run the corresponding script file in NUC8_MacOnlineInstaller depending on your operating system
3. Restart computer and install macOS with the USB flash driver After all steps above are completed

Active iMessage/FaceTime

1. Genarate Serial Number, Board Serial Number and SmUUID with Hackintool
2. Check your Serial Number on https://checkcoverage.apple.com, and make sure the result looks like the picture below, otherwise genarate them again (and again)
3. Replace Serial Number, Board Serial Number and SmUUID in config.plist
4. Restart computer

---

Show your support

Give a ⭐️ if this project helped you!