PeterSuh-Q3 / tinycore-redpill

M Shell for tinycore-redpill

Please note that minimum recommended memory size for configuring the loader is 2GB

Instructions

A typical build process starts with:

1. Burn images

   A. To burn physical gunzip and img files to a USB stick

   B. For virtual gunzip use the provided vmdk file

2. Boot Tinycore

3. Loader Building

    A. Choose one of the Synology models.

    B. Create a virtual serial number or enter a prepared serial number.

    C. Select the real mac address of the nic or create a virtual mac address or 
       input the prepared mac address. 
       (If there are 2 nics, you can enter up to the 2nd mac address)

    D. Build the loader.

6. Reboot

< Version History >

1.0.1.1 Fix monitor fuction about ethernet infomation
1.0.1.2 Fix for SA6400
1.0.2.0 Remove restrictions on use of DT-based models when using HBA (apply mpt3sas blacklist instead)
1.0.2.1 Changed extension file organization method
1.0.2.2 Recycle initrd-dsm instead of custom.gz (extract /exts), The priority starts from custom.gz
1.0.2.3 Added RedPill bootloader hard disk porting function
1.0.2.4 Added NVMe bootloader support