Perlover / Asus-Zenbook-Ambient-Light-Sensor-Controller

A daemon that adjusts screen and keyboard backlight using the Zenbook's light sensor

Asus Zenbook Ambient Light Sensor Controller

Tested with:

• UX305
  • Ubuntu 16.04 + Linux 4.4.0

How to install

Required packages: libbsd-dev, qt4-qmake / qt5-qmake, g++

1. Install the ALS Driver:
2. Download the source code from here.
3. Extract the archive, move into the directory, and compile with make.
4. Insert the module into your current kernel with sudo insmod als.ko 1. sudo cp als.ko /lib/modules/$(uname -r)/ 2. sudo bash -c 'echo als >>/etc/modules && sudo depmod' 3. sudo bash -c 'echo "blacklist acpi_als" >/etc/modprobe.d/blacklist-acpi_als.conf'
5. Build this controller:
6. cd service
7. qmake als-controller.pro -r -spec linux-g++-64, or qmake als-controller.pro -r -spec linux-g++ if you're on a 32-bit system.
8. make
9. sudo cp als-controller /usr/local/bin/
10. sudo bash -c 'echo "/usr/local/bin/als-controller && /usr/local/bin/als-controller -e" >>/etc/rc.local'
11. restart notebook

The generated binary file, als-controller, is what will monitor the light sensor.

How to use

After reboot brightness will be corrected by auto

1. Launch als-controller with root privileges, for example: sudo ./als-controller. This will be the service that monitors the light sensor.

2. Use the same program with user privileges, als-controller, to control the service. Some examples:

   ./als-controller -e     // Enable the sensor
   ./als-controller -d     // Disable the sensor
   ./als-controller -s     // Get sensor status (enabled/disabled)
   

Example

After compiling and running als-controller, try running switch.sh from the "example" folder. For an ideal integration with your system, the suggested idea is to start the service at boot, and then bind some script similar to switch.sh to a key combination on your keyboard.

Troubleshooting

If als-controller isn't working, a possible cause is that the driver can't see the sensor. Try setting the boot option acpi_osi='!Windows 2012' (e.g. at the end of GRUB_CMDLINE_LINUX_DEFAULT in /etc/default/grub) and then reboot.

In addition, you can check als-controller logs with cat /var/log/syslog | grep als-controller.

Thanks

• Diego - https://github.com/Voskot