A clone of the Adafruit Ultimate GPS FeatherWing but with the u-blox MAX-M8Q (external antenna) replacing the GlobalTop FGPMMOPA6H
23-09-2017: Updated PCB now includes: pull-up resistors for SCL and SDA; a decoupling capacitor for VCC_RF; a test pad for SAFEBOOT
See MAX-M8Q_GPS_FeatherWing.pdf for the BOM etc.
The Eagle directory contains the schematic and pcb design
The Arduino directory contains code for the Adafruit Feather M0 Adalogger which will log your route to SD card in GPX and CSV format
Useful documentation about the MAX-M8Q and its protocol specification can be found at:
- https://www.u-blox.com/en/files/max-m8datasheetubx-13004644pdf
- https://www.u-blox.com/en/files/max-m8himubx-13004876pdf
- https://www.u-blox.com/en/files/u-bloxm8receiverdescrprotspecubx-13003221publicpdf
Based on an original design by Adafruit Industries:
- https://www.adafruit.com/product/3133
- https://learn.adafruit.com/adafruit-ultimate-gps-featherwing
- https://github.com/adafruit/Adafruit-Ultimate-GPS-FeatherWing-PCB
Distributed under a Creative Commons Attribution, Share-Alike license
Adafruit invests time and resources providing this open source design, please support Adafruit and open-source hardware by purchasing products from Adafruit!
Enjoy!
Paul