SpaceNavigator

A Unity3D driver for the SpaceNavigator and other 3DConnexion devices.

This driver lets you fly around your scene and allows you to move items around.
It can also be used at runtime via scripting.

The default mode is Fly mode and when you're flying around, this driver keeps your horizon horizontal.
So you don't have to worry about ending up upside down, just go where you want and get some work done.
To comfortably navigate large areas and minute details, you can easilly switch between 3 customizable sensitivity presets.
To move stuff around, you can use 2 modes: Telekinesis and GrabMove.
In Telekinesis mode, you can move the stuff you selected with the SpaceNavigator, while your camera stays put.
(this mode can be operated in Camera-, World-, Parent- and Local coordinates)
In GrabMove mode the stuff will be linked to your camera so you can take it with you and position it where you want.
Translation can be snapped to a grid and rotation can be angle-snapped.

If you encounter issues, please report them via the project's Github Issues page.
If you have feedback, please use this thread on the Unity Discussions site.

What's new in 2.0.0 ?

3DConnexion driver no longer required

The driver's communicates directly with the HID device via Unity's new Input System (Unity 2019.1 and up).
This means that it no longer requires the 3DConnexion driver to be running or even installed.
It also means that 3DConnexion devices other than the SpaceNavigator might not work correctly, the 3DConnexion SDK abstracted away a lot of differences between devices.
On the other hand, it allows you to use devices which 3DConnexion have stopped supporting in their driver. https://3dconnexion.com/nl/support/faq/3dconnexion-discontinued-devices/

Your project must have the new Input System enabled.
You can have both the old and new Input System active, see this tip.
This page can help with upgrading to the new Input System.

Editor toolbar

Makes common operations available in the scene view.

Navigation mode switching
Speed switching
Presentation mode
Opening the settings window

With optional extra speedy speed controls.

Presentation mode

Sometimes you want to give a demo or capture a video, then you want your navigation to be as smooth as possible.
The new presentation mode automatically smooths out your input.

New measures against drift

To counter the drift problem, a calibration but~~~~ton was added to the settings window. This stores the current input values, these will be subtracted from the input from then on.

Only navigate when Unity has focus

This comes in handy when you've got multiple applications open which use the SpaceNavigator.

SpaceNavigator driver as a package

The driver is structured as a UPM package and can be added to your project via the Project Manager.
See the download section for details.

Download

The driver can now be downloaded via the Package Manager window
- From git url :
  - Click the + button in the top left of the Package Manager window
  - Choose Add package from GIT url...
  - Enter https://github.com/PatHightree/SpaceNavigator.git
    Note, for this you need to have git installed on your system !
- From disk :
  - Download the driver from the github releases page
  - Click the + button in the top left of the Package Manager window
  - Choose Add package from disk...
~~The full package is available on the Unity asset store.~~
Todo: Update asset store package to v2.0.0

If you want to install a specific version, download it from the github releases page and install it via the From Disk method.

Installation

Add the driver to your project as described in the Download section
If your project was not yet using the new Input System, you have 2 options :
- Use both input systems simultaneously
  - Close and reopen the project
  - A popup will ask you to switch to the new Input System, choose NO
  - Set Project Settings/Player/Active Input Handling to Both
    See this tip
- Switch to the New Input System
  - Close and reopen the project
  - A popup will ask you to switch to the new Input System, choose Yes
  - The project will close and reopen itself
  - You will have to modify any code which used the old Input System
    Here is an overview of common old Input usages and their new equivalents
Fly away

Upgrading from 1.x

When upgrading from a pre-2.0.0 version of the plugin, please follow these steps :

Close the SpaceNavigator editor window
Delete the SpaceNavigator folder from your project
Delete Plugins\3DConnexionWrapperU4.bundle from your project
Add the driver to your project as described in the Download section
Install the driver by following the steps in the Installation section

If you delete the folder while the SpaceNavigator window is still open, Unity will throw some errors. When this happens, choose the default layout from the layout dropdown in the top right of Unity's UI and everything should return to normal.

Upgrading from 2.x

At this time the Package Manager window does not show all available versions in a git repo.
So until this changes, the upgrade process consists of removing the old version and installing a new one as described in the Download section.

Samples

To install these samples, open the SpaceNavigator package in the Package Manager window and click the Import button in the Samples section.

Runtime Samples

The package also contains a couple of samples of runtime applications :

Fly around.unity: Fly around with a sphere while knocking over some cubes.
Folow curve.unity: Make your torus follow the curve, but don't touch it!

Input Helper

The Input Helper is a utility to collect all info on your 3DConnexion device.
If your 3Dconnexion device has a data layout which is not yet supported by the driver, please file an issue on the GitHub Issues page and supply the data this tool collects.
After installation you can find the tool in the pull-down menu under Window/SpaceNavigator/Save all HID descriptors to files.

Known bugs and limitations

The New Input System package must be active for this driver to work
Grab Mode only works in the camera coordinate system

Credits

Felix Herbst for the input helper and adding scene focus to runtime navigation
William Iturzaeta from Canon Medical Systems USA, for hiring me to make this project compatible with Unity 2020
The proceeds of this job have been donated to cancer research
Stephen Wolter for further refinement to the mac drift fix
Enrico Tuttobene for contributing the mac drift fix
Kieron Lanning for implementing navigation at runtime
Chase Cobb from Google for motivating me to implement the mac version
Manuela Maier and Dave Buchhoffer (@vsaitoo) for testing and development feedback
Ewoud Wijma for loaning me the Hackingtosh for building the Mac port
Quaternion math by Minahito http://sunday-lab.blogspot.nl/2008/04/get-pitch-yaw-roll-from-quaternion.html

PatHightree / SpaceNavigator