Pedro L.'s repositories
BHSTools
Tools for interacting with Brinks BHS-3000 and BHS-4000 / IntelliBus, custom firmware for BHS-4000
kw1281test
VW KW1281 Protocol Test Tool
multiflasher-python
Portable python-based flasher utilities (to program/dump MCU flash)
Longduino
Longduino is an Arduino port for gd32v mcu.
libriscv
C++20 RISC-V RV32/64/128 userspace emulator library
apm32f10x_firmware_library_gcc_makefile
Geehy apm32f10x firmware library with gcc and makefile support
STM32_CAN
CAN bus Library for Arduino STM32
canbox
Firmware for canbus boxes
Honda-Motorcycle-Dash
External information display for modern Honda motorcycles, using the HDS (diagnostic) connector on the ECU and other sensors (e.g GPS, DHT22)
Honda-Motorcycle-ECU-Tools
Tools for reading data from modern honda motorcycle ECUs
eepromtool_GUI_upgrade_1
I'm working on a GUI interface for the eepromtool4 here
opensource-toolchain-gd32vf103
Opensource toolchain for gd32vf103 RISC-V 32bit MCU
gd32vf103_firmware_library_gcc_makefile
GigaDevice offial gd32vf103_firmware_library for gd32vf103 risc-v family with gcc and makefile support
BMCOP
Coil On Plug Project made with Arduino Nano V3 for Honda/Acura
st10f-programming-tool
Programming tool for ST10F family of microcontrollers.
Honda-CoP-conversion-
DIY project that started on Honda-tech forum by amadeuscr
GD32Firmware
Gigadevice firmware libraries all in one convenient place
IGNIDUINO
electronic ignition + injection for 1 cyl 2 stroke engine on arduino NANO
m35080_Read_BitBang
Arduino sketch for dumping data from the registers of the m35080 eeprom
ddt4all
OBD tool
Blue-and-Pi
Fiat 500 CAN infotainment system
Trionic
Trionic flasher
gaz
backup of docs on ECU
opengauge
Automatically exported from code.google.com/p/opengauge
ecu_diagnostics
A Rust crate for ECU diagnostic protocols (UDS / KWP)
uds-server
CAN UDS Simulator and Fuzzer