This code is based on the wonderfull work of george7378.
Receive (This command must be done on the raspberry itself, not via SSH)
python ReceiveRF.py
Send COMMAND (see commands in code)
python TransmitRF.py YOUR_COMMAND
Send UP (Hardcoded key for work)
python up.py
| WIRE | PIN | PIN | WIRE |
|---|---|---|---|
| Rx VCC (3.3V) | 1 | 2 | Tx VCC (5v) |
-
| 3 | 4 | - -
| 5 | 6 | Tx GND -
| 7 | 8 | -
Rx GND | 9 | 10 | - Rx DATA | 11 | 12 | Rx DATA
-
| 13 | 14 | - -
| 15 | 16 | - -
| 17 | 18 | - -
| 19 | 20 | - -
| 21 | 22 | - -
| 23 | 24 | - -
| 25 | 26 | - -
| 27 | 28 | - -
| 29 | 30 | - -
| 31 | 32 | - -
| 33 | 34 | - -
| 35 | 36 | - -
| 37 | 38 | - -
| 39 | 40 | -