Jonin

A fully customizable CLI application to coummunicate with and send commands to Ninja running behind any NAT, firewall and proxy! Providing secure shell access, file transfer and shell stream (stream shell output from remote to a local file). Jonin has no prerequisites, you can just download the release and use it right away!

Please note that Jonin is the controller (commander). You would need Ninja on target (remote) computer(s) to host and execute the Jonin's commands

Download

You can download latest release from here

Features

Secure shell access to remote (Ninja) computer
File upload/download (Multiple files at once) to/from remote (Ninja)
Shell stream, run command on remote (Ninja) and stream output to a file on local (Jonin)

Demo

Ninja.Demo.mp4

Platforms


Windows 10 ✔	macOS 12 Monterey ✔	Parrot OS 4.11.2 ✔

Overview

This CLI application will provide a fully customizable tool to manage Ninja instances, connect to them, execute commands, download and upload files and use shell stream feature (stream shell output from Ninja to Jonin/local computer).

Download
Features
Platforms
Overview
Ninja
Setup
Usage
- Control Commands
  - change
  - clear
  - exit
- Command Types
  - manage
  - cmd
  - cmd-stream
  - upload
  - download
  - tray
Configuration File
Host Setup
Use As Spyware

Ninja

Ninja should be running on the target computer in order to control it with Jonin. PORT configuration should be same on Ninja and Jonin and HOST should point to Jonin to establish connection

Setup

Follow these steps to setup Jonin:

Download the release and extract
Change PORT in config/constants.json to match PORT on target Ninja. Please read This Guide about how to setup HOST to never lose access to Ninja
Forward selected port on you router. There are lots of guides out there. This one from noip is a nice one
Done! Now wait for some report from your Ninja !

Note: make sure to create your own certificates in /certificates. Existing certificates are only to make it easier to test

Usage

There are few command types available that each of them has their own commands. Here's a full instruction:

(Note that you can customize all these commands in config/constants.json)

Control Commands

change
use this command to change command type (list of all types)
cls, clear
clear console
/exit
cose Jonin

Command Types

manage

Ninja management command. using this command type, you can see list of your Ninja s, check their details and connect to them

note: you should list Ninja s first in order to use commands that require index

Usage:
- list
  
  List all Ninjas
- expand <index>
  
  display all details of the Ninja with index < index > from Ninja list
- connect <index>
  
  connect to the Ninja with index < index > from Ninja list
- disconnect
  
  disconnect from Ninja
Example:
- list show list of Ninjas
- expand 1
  
  display all details of Ninja Ninja with index 1 from Ninja list
- connect 1
  
  connect to Ninja Ninja with index 1 from Ninja list
cmd

This is a direct shell access to Ninja. You can type any command and see the output

note: you can press ESC at any time to kill current shell and start a new one

Usage:

any valid command

Example:
- ping 8.8.8.8
- diskpart
- traceroute
cmd-stream

Same as cmd, except this one takes 2 local file paths and pipes the command output and error from Ninja to these files respectively

note: you can press Esc at any time to end transfer

Usage:

@<command>@<output_file>@[<error_file>@]
- <command> any valid command
- <output_file> a valid local file path to pipe process output
- <error_file> a valid local file path to pipe process error
Example:
- @tracert 8.8.8.8@G:/trace.txt@
  
  pipe trace route result from Ninja to G:/trace.txt)
- @ffmpeg -f gdigrab -framerate 30 -i desktop -f matroska -@G:/desktop.mkv@G:/desktop-err.txt@
  
  record Ninja desktop and pipe it to G:/desktop.mkv, also pipe any process error to G:/desktop-err.txt
upload

Upload one or more files from local to Ninja

note: you can press Esc at any time to end transfer

Usage:

@<local_file_path>|<remote_file_path>@[...]
- <local_file_path> a valid local (source) file path
- <remote_file_path> a valid file path on Ninja (destination)
- [...] add more path pairs to upload multiple files at once
Example:
- @G:/movie.mkv|C:/movie.mkv@
  
  upload movie.mkv from local's G drive to Ninja's C drive
- @G:/movie1.mkv|C:/movie1.mkv@G:/movie2.mkv|C:/movie2.mkv@
  
  upload movie1.mkv and movie2.mkv from local's G drive to Ninja's C drive both together
download

Download one or more files from Ninja to local

note: you can press Esc at any time to end transfer

Usage:

@<local_file_path>|<remote_file_path>@[...]
- <local_file_path> a valid local (destination) file path
- <remote_file_path> a valid file path on Ninja (source)
- [...] add more path pairs to download multiple files at once
Example:
- @G:/movie.mkv|C:/movie.mkv@
  
  download movie.mkv from Ninja's C drive to local's G drive
- @G:/movie1.mkv|C:/movie1.mkv@G:/movie2.mkv|C:/movie2.mkv@
  
  download movie1.mkv and movie2.mkv from Ninja's C drive to local's G drive both together
tray

To have some fun, you can control Ninja's disk tray

Usage:

eject close

note: close command is only available for Linux for now

Configuration File

You can find this file in config/constants.json:

{
    // connection port
    "PORTS": {
        "DATA": 3707
    },

    // connection config. any valid Socket.io option
    "CONNECTION": {
        "RECONNECTION_DELAY_MAX": 5000,
        "RECONNECTION_DELAY": 1000,
        "TIMEOUT": 20000,

        "rejectUnauthorized": false
    },

    // interval in which file receiver party will send ack to sender
    "FILE_TRANSFER": {
        "ACK_INTERVAL": 2000
    },

    // command type names
    "COMMAND_TYPES": {
        "CMD": "cmd",
        "TRAY": "tray",
        "INSTANCE_MANAGEMENT": "manage",
        "UPLOAD": "upload",
        "DOWNLOAD": "download",
        "CMD_STREAM": "cmd-stream"
    },

    "INSTANCE_MANAGEMENT_COMMANDS": {
        "LIST": "list",
        "CONNECT": "connect",
        "DISCONNECT": "disconnect",
        "EXPAND": "expand"
    },

    "TRAY_COMMANDS": {
        "EJECT": "eject",
        "CLOSE": "close"
    },

    "CONTROL_COMMANDS": {
        "CHANGE_COMMAND_TYPE": "change",
        "CLEAR": ["cls", "clear"],
        "EXIT": ["/exit"],
        "HELP": "#help"
    },

    "CONTROL_KEYS": {
        // control key to force end streams, including 
        // upload, download and shell stream
        "END_STREAM": {
            // key display name, can be anything
            "NAME": "Esc",
            // JavaScript keypress event key name
            "CODE": "escape"
        },
        // control key to restart remote shell process
        "RESTART_REMOTE_SHELL": {
            "NAME": "Esc",
            "CODE": "escape"
        }
    },

    // separators used in commands like download and upload
    "PRIMARY_SEPARATOR": "@",
    "SECONDARY_SEPARATOR": "|",

    "PROGRESS_BAR": {
        // progress bar colors 
        "COLOR_MAP": {
            "FAILED": ["red", "red"],
            "INVALID": ["red", "red"],
            "DONE": ["gray", "green"],
            "IN_PROGRESS": ["gray", "cyan"]
        },
        // progress bar name/label maximum length
        "MAX_NAME_LENGTH": 10
    }
}

Host Setup

When configuring Ninja, you should use a HOST that points to Jonin computer and also will always be available. So you'll have to use one of the following options:

Use Dynamic DNS

This is the best way I can suggest since It's free and easy. you just need to create an account in one of DDNS services (like Duck DNS and No-Ip), create a domain name and set it to point to your dynamic IP address. If your ISP changed your IP, then just simply change it on DDNS website or install a Dynamic Update Client (DUC) to do this for you automatically.

Use A VPS

You can purchase a VPS and use its IP or hostname as HOST in config file. However you'll always have to control your Ninjas from this VPS. Another downside is that this is paid.

Use A Static IP Address

You can use an IP address for your Jonin and set this IP in Ninja's configuration. This is not recommended since you'll have to spend money while there are easy free ways, unless you have a static IP already

Use A Domain Name

Just like static IP, you can use a domain name for your Jonin and set this name in Ninja's configuration. For same reason as static IP, this also is not a recommended way

Record Ninja Camera And Mic

One way to do this is to use FFmpeg. You'll need to either copy FFmpeg files into target computer when setting up Ninja, upload it to an already set up Ninja using upload command or order Ninja to download it itself using shell commands Then, on windows for example, you can run this:

ffmpeg -list_devices true -f dshow -i dummy

to see list of DirectShow devices and then use the following cmd-stream command to record it on Jonin computer:

@ffmpeg -f dshow -i video="DIRECT_SHOW_CAMERA_FROM_LIST":audio="DIRECT_SHOW_MIC_FROM_LIST" -f matroska -@G:/cam.mkv@G:/cam-err.txt@

which will save video to G:/cam.mkv and errors to G:/cam-err.txt

Use As Spyware

Please note that Ninja can be easily used as a spyware when installed as a service, it will open full access to the target computer for the Jonin controlling it

Source Code

Source code will be open soon, after some refactoring and improvements

PC-Pedia / Jonin

Jonin

Download

Features

Demo

Platforms

Overview

Ninja

Setup

Usage

Control Commands

`change`

`cls`, `clear`

`/exit`

Command Types

`manage`

`cmd`

`cmd-stream`

`upload`

`download`

`tray`

Configuration File

Host Setup

Use Dynamic DNS

Use A VPS

Use A Static IP Address

Use A Domain Name

Record Ninja Camera And Mic

Use As Spyware

Source Code

About

Jonin

Download

Features

Demo

Platforms

Overview

Ninja

Setup

Usage

Control Commands

change

cls, clear

/exit

Command Types

manage

cmd

cmd-stream

upload

download

tray

Configuration File

Host Setup

Use Dynamic DNS

Use A VPS

Use A Static IP Address

Use A Domain Name

Record Ninja Camera And Mic

Use As Spyware

Source Code

About

`change`

`cls`, `clear`

`/exit`

`manage`

`cmd`

`cmd-stream`

`upload`

`download`

`tray`