Giters
OpenInverterGateway
/
OpenInverterGateway
Firmware replacement for Growatt ShineWiFi-S
Geek Repo:
Geek Repo
Github PK Tool:
Github PK Tool
Stargazers:
263
Watchers:
25
Issues:
176
Forks:
88
OpenInverterGateway/OpenInverterGateway Issues
Strange Values of OutputPower at the evening
Updated
10 days ago
Error: Unknown Shine Stick
Updated
a month ago
Comments count
9
SPH-60000TL3-BH-UP - "Unknown Shine Stick"
Closed
6 months ago
Comments count
6
Growatt 1500-S inverter support
Updated
a month ago
Comments count
1
any chance to implement NTP so that the inverter can not drift in time..
Updated
a month ago
Suport shine Wifi-F (the big old white) that you need for all GROWATT SPF Series
Closed
2 months ago
Comments count
4
no data from inverter
Closed
6 months ago
Comments count
4
Write Modbus HoldigRegister via HTTP POST
Closed
8 months ago
Comments count
3
Can't get any data from 10KTL3-X inverter.
Closed
2 months ago
Comments count
2
modbus - RTU over TCP - iobroker
Closed
2 months ago
Comments count
1
How can i change the Modbus Protocol?
Closed
2 months ago
Comments count
1
Strange values for TodayGenerateEnergy
Updated
4 months ago
Comments count
7
Protocoll Error in Mosquitto
Closed
4 months ago
Comments count
3
WiFi reconnection failure
Closed
4 months ago
Comments count
1
Battery values stay on 0
Closed
7 months ago
Comments count
5
Battery Status not available with Growatt mod 9000tl3-xh
Closed
4 months ago
Comments count
2
Which EEPROM.h use for this?
Closed
4 months ago
Comments count
2
Only precompiled release 1.0.0 works with Shine X
Closed
4 months ago
Comments count
1
Original Firmware
Closed
5 months ago
No response from Inverter
Closed
8 months ago
Comments count
4
Huge first value
Closed
5 months ago
Comments count
3
Unable to set MQTT broker
Closed
6 months ago
Comments count
1
Add Possibility to update the firmware when connected to an AP
Closed
6 months ago
Comments count
1
SPH 8000TL3 BH-UP without PV strings | Error: Unkown Shine Stick
Closed
6 months ago
Comments count
1
No data MIN2500/ShineX
Closed
6 months ago
Comments count
2
PV energy at night / home assistant
Closed
6 months ago
Comments count
3
Add MQTT command to get firmware version
Closed
6 months ago
Comments count
1
Add an example for battery first mode
Closed
6 months ago
Comments count
30
Will it work with the 3000 TL LVM-48p
Closed
6 months ago
Comments count
2
[Feature Request] Add Modbus communication to publish data into Victron system
Closed
6 months ago
Comments count
1
mqtt-server
Closed
9 months ago
Comments count
2
energy/solar/command/batteryfirst/get doesn't return a result
Closed
7 months ago
Comments count
17
Cant write to ShineWifi-X
Closed
7 months ago
Comments count
4
Home Assistant configuration not helpfull
Closed
7 months ago
Comments count
1
MQTT lost settings
Closed
7 months ago
Comments count
1
ShineWifiX no more Flash possible after Image 1.0
Closed
7 months ago
Comments count
2
Difference between PVEnergyTotal and TotalGenerateEnergy?
Closed
7 months ago
Comments count
1
BatteryTemperature wrong steps
Closed
7 months ago
Comments count
5
How can i change the Protocoll to 120?
Closed
8 months ago
Comments count
3
Is it possible to get the China Cloud back?
Closed
8 months ago
Comments count
2
PVPower / PEX1 +2? Crazy value if PVPower = 0
Closed
8 months ago
Comments count
14
Mqtt sensor state is not retained after restart HA
Closed
8 months ago
Comments count
2
Error: Unknown Shine Stick
Closed
8 months ago
Comments count
5
doesn't connect with WIFI
Closed
8 months ago
Infos about GROWATT_MODBUS_VERSION for pre-comiled Releases
Closed
8 months ago
Comments count
4
Inverter no respoding
Closed
8 months ago
Comments count
6
More guidance needed for newbie to flashing
Closed
8 months ago
Comments count
2
Compilation error: call of overloaded 'String(uint64_t)' is ambiguous
Closed
9 months ago
Comments count
1
issue connect to mosquitto with homeassistant
Closed
10 months ago
Comments count
1
Growatt MOD 10000TL3-XH Erweiterung integration
Closed
10 months ago
Comments count
1
Previous
Next