WinFIM.NET

WinFIM.NET - File Integrity Monitoring For Windows

For a detailed introduction, please visit the Cyber Security Corner technical blog.

Introduction

There are plenty of commercial tools to do file integrity monitoring (FIM). But, not many freeware / Open Source options, especially for Windows.

A small application named WinFIM.NET has been developed to try to fill this gap.

characteristics

The characteristics of this application are:

Identify added / removed / modified files and directories since the previous run
The monitoring scope can be easily customized
Path exclusion (e.g. sub-directory) could be configured
File extension exclusion could be configured (e.g. *.bak, *.tmp, *.log, *.mdf, *.ldf, *.xel, *. installlog)
Can be launched as a Windows service or as a console application
Logging is configurable, with the following defaults:
- Logs to Native Windows Events, which can integrate with existing log management mechanisms (e.g. Windows Event Subscription, Winlogbeat , nxlog, etc.)
- Logs to file and the console with customisable logging levels (verbose, debug, information, warning, error)
  - The file path and format is customisable (text, JSON)
  - Logs to the console (when the file WinFIM Service.exe is launched directly rather than as a windows service.
Deployment friendly
Uses SHA256 for hashing

Installation (local machine)

Option 1: Via MSI / setup.exe installer

Double click the setup.exe or WinFIM.NET-setup.msi file and follow the prompts to install WinFIM and setup the service

Option 2: Manual install

Download the zip file to the destination computer and extract the contents
Unblock the WinFIM.NET Service.exe (if required)
In an Administrator command prompt, execute the file install_service.bat

Installation (Docker)

To Build and run the WinFIM.NET Docker image
Requirements: Docker Desktop is installed on the host computer

Build Docker image from Visual Studio

Launch visual Studio
Switch to the "Docker Compose" project
Select the Release profile
Click Build > Build Solution

Build Docker image from commandline

To build the Docker image, from the compiled WinFIM directory:

Edit Dockerfile
- Replace the COPY command with: COPY . C:\Tools\WinFIM.NET
Edit .dockerignore
- replace the contents with: Dockerfile

Run:

docker build --tag winfim.net:latest .

Configuation

Configure WinFIM.NET to suit your own environment
1. monlist.txt – put your in-scope monitoring files / directories (Absolute path) line by line under this file
2. exclude_path.txt – put your exclusion (Absolute path) line by line under this file (the exclusion should be overlapped with the paths in monlist.txt (e.g. Sub-directory of the in-scope directory)
3. exclude_extension.txt – put all whitelisted file extension (normally, those extensions should be related to some frequent changing files, e.g. *.log, *.tmp)
4. scheduler.txt – This file is to control whether the WinFIM.NET will be run in schedule mode or continuous mode.
  - Put a number 0 to the file, if you want the WinFIM.NET keep running.
  - Put a number (in minute) for the time separation of each run. e.g. 30 (that means file checksum will be run every 30 minutes).
Configure Windows Event logs
1. Windows Event logging is enabled by default.
  1. To disable, edit the file WinFIM.NET Service.exe.config (Sourcecode filename: App.config
    1. Change the entry is_log_to_windows_eventlog to False
2. If you want to log to Windows Event logs, make sure that the maximum log size is configured according to your deployment environment. By default, only 1MB is reserved for Windows Event logs.
3. The Windows Event log file is located here: %SystemRoot%\System32\Winevt\Logs\WinFIM.NET.evtx
File and console level logs use the Serilog logging framework.
1. The Serilog configuration is stored in the a text file called the app.config file. To modify:
  1. Edit the file WinFIM.NET Service.exe.config (Sourcecode filename: App.config)
    1. Review the entries starting with <add key="serilog:
      1. Example: The log file location is defined in setting <add key="serilog:write-to:File.path" value="c:\tools\WinFIM.NET\.log" />
        
        Note that the date in yyyymmdd format is automatically inserted into the filename before the dot, e.g. 20221004.log
  2. More information about configuring log settings are here: https://github.com/serilog/serilog-settings-appsettings
  3. The following Serilog plugins have been installed:
    1. Serilog.Settings.AppSettings - enables the Serilog settings to be stored in the .NET framework app.config file
    2. Serilog.Sinks.Console - outputs logs to the console when running the .exe file directly (rather than running as a service)
    3. Serilog.Sinks.File - outputs logs to a file
Configuring the capture of remote connections
1. WinFIM.NET can capture the current remote connection status at the beginning of every file checking cycle.
  When suspicious file changes are identified, this information may able to speed up the whole forensic / threat hunting process.
  1. This is disabled by default. To enable:
    1. Edit the file WinFIM.NET Service.exe.config (Sourcecode filename: App.config
    2. To enable, edit app.config file, change the entry is_capture_remote_connection_status to True

Running

If the Windows service has been installed, WinFIM.NET will automatically start on system startup
If the Windows service has not been installed, or if it is not started, executing the file WinFIM.NET Service.exe will launch WinFIM.NET as a console application

Running in Docker

# Run in interactive mode (show a Powershell prompt)
docker run --name winfim --volume "C:\:C:\host:ro" --rm -it winfim.net:latest powershell

# Run in interactive mode (show a Powershell prompt), with Internet access from a Windows host
docker run --name winfim --volume "C:\:C:\host:ro" --net "Default Switch" --rm -it winfim.net:latest powershell

# Run in interactive mode, viewing live logs
docker run --name winfim --volume "C:\:C:\host:ro" --rm -it winfim.net:latest

Uninstallation

Option 1: Via Add or Remove Programs

Locate the program "WinFIM.NET" and click Uninstall

Option 2: via the MSI installer

Run the MSI installer (or setup.exe file) and click "Remove WinFIM.NET"

Option 3: Manually uninstall

If you manually installed WinFIM.NET:

Bring up an Administrator command prompt and navigate to the deployed folder, then execute uninstall_service.bat

Windows Event Log IDs

Therse are the configured Windows event Log ID types:

7771 - remote connection status. Potentially useful for threat hunting if suspicious file changes are identified
7772 - service heartbeat message
7773 - errors
7776 - File / directory creation
7777 - File modification
7778 - File / directory deletion

Development notes

Source code available in Github project OWASP/www-project-winfim.net
Targets the .NET 4.8 framework
The current database is a SQLite 3 database, and is built if not exist on program startup
Is currently built with Visual Studio 2022
Uses the Visual Studio Addon Microsoft Visual Studio Installer Projects to build the MSI installer

SQLite Database structure

Filename: fimdb.db
database type: SQLite version 3
Tables:
- BASELINE_PATH
  - Stores the details of paths that were checked in the previous run. At the end of the current run, the contents are deleted then copied from current_table
- CONF_FILE_CHECKSUM
  - Stores checksums for the config files, e.g. monlist.txt, exclude_extension.txt, exclude_path.txt, monlist.txt
- CURRENT_PATH
  - Stores the details of the the paths as they are being being checked, so it can be checked against the file details in the baseline_table. The contents are deleted at the end of the current run
- VERSION_CONTROL
  - Stores the schema version and notes about changes

OWASP / www-project-winfim.net