Dalton is a system that allows a user to quickly and easily run network packet captures ("pcaps") against an intrusion detection system ("IDS") sensor of his choice (e.g. Snort, Suricata) using defined rulesets and/or bespoke rules.
Dalton also includes a wizard-like web interface for Flowsynth to facilitate custom pcap creation.
Quickstart:
or this which does the same thing:
docker-compose build && docker-compose up -d
Then navigate to http://<docker-host>/dalton/
To configure what rulesets are available, see Adding Rulesets.
To configure what sensors are available, see Adding Sensors.
If Dalton is being built behind a proxy, see Building Behind A Proxy
- Use Cases
- Design
- Requirements
- Installing and Running Dalton
- Using Dalton
- Dalton API
- Teapot Jobs
- Adding Rulesets
- Adding Sensors
- Adding Sensor Configs
- Logging and Debugging
- Flowsynth WebUI
- Frequently Asked Questions
- Authors
These are the most common use cases for Dalton:
- Testing Rulesets/Ruleset Coverage
User-provided pcaps can be run thru an IDS engine loaded with a particular ruleset. - Troubleshooting and Developing Signatures
User-provided pcaps can be tested against user-provided ad hoc IDS rules to quickly and easily see the IDS alerts and/or test for rule syntax errors. - Testing Variable Changes
The ruleset variables used by the engine can easily be modified for submitted jobs; this can be used to determine the impact that a variable change may have on a specific detection. - Testing Configuration Changes
Customized engine configuration files can included with submitted jobs; this can be used to determine the impact that an engine configuration change may have on a specific detection. - Testing specific IDS engine behavior
Dalton supports the ability to apply the above use cases on specific sensors. The Dalton architecture is designed to accommodate and support sundry sensor engines and engine versions. - Crafting custom packet captures
As part of the Web interface, Dalton has a module that provides a wizard-like web interface for Flowsynth. This allows for quick and easy network flow definition and pcap creation for popular protocols and traffic patterns.
Dalton consists of a “controller” (dalton.py) and “agents” (dalton-agent.py). The controller provides a web interface as well as a HTTP API for agent communication and programmatic job results retrieval. From a web interface, a user submits a job to be run on a particular agent or agent platform. A Dalton job consists of one or more pcaps, a pre-defined ruleset and/or custom rules, agent engine configuration options (e.g. configuration to apply to Suricata when running a job), and a manifest file specifying other options for the job (e.g. return rule performance logs).
The Dalton Agent code (dalton-agent.py) runs on an IDS sensor and provides an interface between the Dalton controller and an IDS engine. Dalton agents grab pending jobs from the Dalton controller, run them locally, and report the results back. These results are then displayed in the web GUI provided by the Dalton controller. Jobs are submitted to specific sensor engines (e.g. Suricata) and versions (e.g. 4.0.0).
Code for the Dalton agent and controller webapp are written in Python and leverage Flask and Jinja2. On the Dalton controller, Redis is used to manage the job queue, store results, and maintain a list of active Dalton agents.
The Dalton controller includes a Flowsynth WebUI module that provides a user interface to assist with rapid Flowsynth language prototyping and development of network flow definitions that are then compiled into network pcaps by the Flowsynth script. This is basically a GUI to facilitate input and output to Flowsynth. There is the option to easily send Flowsynth WebUI generated pcaps to Dalton for testing.
While all the above systems could be independent physical (or virtual) machines (and in fact this setup has been done), for ease of install and use, everything has also been architected as a group of Docker containers. The Dalton codebase includes Dockerfiles, “docker-compose.yaml”, and associated configuration files to facilitate easy application launch using a set of Docker containers.
- Docker
- Docker Compose
- Internet connection (to build)
The easiest way to get Dalton up and running is to use the Docker files provided and launch the system as a group of Docker containers. From the root of the repository, run:
or this which does the same thing:
To specify or add what agents (specific sensors and versions) are built and run, edit the docker-compose.yml file as appropriate. See also Adding Sensors.
The HTTP listen port can be changed if desired by editing the DALTON_EXTERNAL_PORT
value in the .env file in the root of the repository.
Configuration options for the Dalton Controller can be found in dalton.conf
; Configuration options for Dalton Agents can be found in dalton-agent/dalton-agent.conf
. See the inline comments in those files for more details.
It is recognized that getting systems to work behind a corporate proxy can be an endless source of acute frustration and ongoing consternation. However, a small attempt has been made to make it easier for Dalton to be built behind a proxy. Note that it comes with no guarantees.
To build Dalton behind a proxy, most likely Docker and the containers will need to be set up to use the proxy.
Configuring Docker to use a proxy will vary depending on the platform Docker is run on. For Linux, it usually involves editing the /etc/default/docker
file, or if systemd is used (as it is in Ubuntu 16.04), see https://docs.docker.com/engine/admin/systemd/. This is for Docker, not the Docker containers. This allows Docker to do things like pull (external) images from the Docker Hub Registry.
To build the Dalton containers behind a proxy, edit the .env
file in the Dalton repository root and set the http_proxy
, https_proxy
, and/or no_proxy
variables accordingly. Example:
Be aware that DNS may not work in which case the IP of the proxy will need to be used.
These environment variables will be used when containers are built. This will allow the container to do things like 'apt-get install...'; they are used inside the container, not by docker to pull (external) images.
Note that these environment variables do not persist after the container is built. This means that if there are no rulesets, and Dalton attempts to download default rulesets, it will most likely fail and result in an empty file. In this case rulesets will need to be added (and the empty files removed); see Adding Rulesets.
The Dalton Controller web interface supports SSL/TLS. To enable, set the DALTON_EXTERNAL_PORT_SSL
variable in the .env
file to the desired SSL/TLS listen port; by default it is 443. Then, modify the "nginx" section of the docker-compose.yml
and uncomment (or add if it is missing) the line:
The Dalton Controller comes with a default certificate and key but these should be replaced. The certificate and key files should be placed in the nginx-conf/tls/
directory and named dalton.crt
and dalton.key
, respectively.
The job submission page can be navigated to via the "New" menu on the toolbar, or by clicking the [Go >>]
button on the homepage below a given sensor technology. The user will be prompted to select the sensor to be used, supply a packet capture and ruleset (pre-defined and/or custom), and given the ability to configure other options using the vertical tab(s) on the submission page. On the 'Config Files' tab a user can modify the sensor configuration file.
Please be aware that in most rulesets, almost all rules looking at TCP traffic are set to inspect established sessions. This means that if a pcap is supplied that only contains a single packet (e.g. from a sensor or firewall technology that only logs a single packet), it will not alert on these rules because the sensor will not see it as an established session because of the lack of a TCP 3-way handshake. If testing such a packet is desired, it will need to be incorporated into a new pcap that includes a 3-way handshake and the server and client IPs set correctly. This can be done fairly easily using Flowsynth; the Flowsynth Web UI makes this easy.
Dalton Agents running Suricata 3.0 and later are capable of using the Suricata Socket Control mode to process pcaps instead of starting up a new Suricata process for each job and using pcap replay mode. Leveraging the socket control feature of Suricata offers significant job performance gains (reduced job runtime) when the ruleset and config do not change between jobs on an agent, since the overhead of starting up Suricata and processing the ruleset is eliminated.
To enable Suricata Socket Control select Use Suricata Socket Control Pcap Processing Mode
on the job submission page, located in the Sensor Version
section of the Job Settings
vertical tab.
If the Dalton agent is unable to use Suricata Socket Control for a job, it will use the classic read pcap mode.
If Rule profiling
is enabled, then Suricata Socket Control mode will be disabled for that job since the rule profiling and keyword profiling logs do not get populated (or usually do not have enough time to be populated) for socket control pcap runs.
The Suricata Socket Control mode leverages the suricatasc
Python module included with the Suricata source. If the agent was built as a Docker container using the Dockerfile(s) provided, then the suricatasc
Python file(s) should already be there and the agent aware of them. If not, or if the module is not in PYTHONPATH, then the SURICATA_SC_PYTHON_MODULE
config item in the dalton-agent.conf
file can be set to point to correct location.
While Socket Control is supported by Suricata in versions 1.4 and later, the suricatasc
module was not Python 3 compatible until Suricata 3.0 so that is the earliest version Dalton supports.
- Problems with Suricata Socket Control Mode
There are some known issues with Suricata Socket Control, not related to Dalton. If problems are encountered with it, try running the job with this option disabled.
On the job submission page, the "Job Settings" vertical tab provides a number of user-configurable options:
- Packet Captures
Specify packet captures (libpcap format) to be run across the sensor. Depending on the engine, pcapng format may be supported as well. Archive files that contain pcaps can be submitted and the files will be extracted and used. Supported extensions (and their inferred formats) are .zip, .gz, .gzip, .bz2, .tar, .tgz, and .tar.gz. Since zip and tar files can contain multiple files, for those formats only members that have the ".pcap", ".pcapng", or ".cap" extensions will be included; the other files will be ignored. Password protected zip files will be attempted to be decrypted with the passsword 'infected'.If multiple pcaps are submitted for a Suricata job, they will be combined into a single pcap on job submission since (older versions of) Suricata can only read a single pcap in read pcap mode.- Create separate jobs for each pcap
If selected, each pcap file sumitted (or found in an archive) will be submitted as its own job. When all the jobs are submitted, Dalton will redirect the user to the Queue page. If this is a Teapot job, then a comma separated list of JIDs is returned.
- Sensor Version
The specific sensor version to use to run the specified pcap(s) and rule(s).- Use Suricata Socket Control Pcap Processing Mode
See Suricata Socket Control Mode section.
- Ruleset
- Use a production ruleset
Select which "production" (pre-defined) ruleset to use if this option is checked. See also Adding Rulesets.- Enable disabled rules
Enable all disabled rules. This may cause engine errors if variables in disabled rules are not defined. - Show all flowbit alerts
Rules that have,flowbit:noalert
will have that directive removed so that they show up in the sensor alerts.
- Use custom rules
This allows a user to specify specific ad hoc rules to include when testing the pcap(s). The user will need to ensure that any custom rules are valid since very little rule syntax validation is done on the Dalton controller; submitting invalid rules will result in verbose errors from the Dalton Agent (sensor engine) being used, which can facilitate rule syntax troubleshooting. Custom rules are added to adalton-custom.rules
file and included in the job so valid format is supported such as multiple rules (one on each line), and comments (ignored lines) beginning with a pound ('#') sign. If asid
is not provided for a custom rule, one will be added when the job is submitted.
- Logs
- Pcap records from alerts (unified2)
This tells the agent to process unified2 alert data and if alerts are generated by the job, this information will show up under the "Alert Details" tab on the job results page. Information returned includes hex/ASCII output from packets that generated alerts as well as "Extra" data from the unified2 file such as "Original Client IP" from packets with "X-Forwared-For" or "True-Client-IP" HTTP headers (if enable_xff is configured on the sensor). Note that Suricata version 6 and later does not support unified2 output so this option is unavailable for jobs to such agents. - EVE Log
Suricata only, version 2 and later. Turn on (or off, if not checked) EVE logging and return the results. The specific EVE log types, settings, etc. are determined by (and can be set in) the config file. Since Suricata version < 3.1 doesn't support multiple TLS loggers, TLS logging in the EVE log is disabled for jobs submitted to such agents. The maximum supported size for the EVE log is 512MB; see note about 512MB limit for 'Other logs'. - Other logs (Alert Debug, HTTP, TLS, DNS, etc.)
Suricata only. This will return other logs generated by the engine that can be useful for analysis and debugging. Depending on the version of Suricata running on the agent, some logs may not be supported. Like all results, the 'Other logs' data is stored in Redis as a string and the maximum size this can be is 512MB. If these logs exceed that size, there may be data loss and/or other issues. Currently the following logs are returned, each in it's own tab, and if the log file is empty, the tab won't be shown:- Engine Stats (always returned even if this option is not checked)
Statistics from the engine including numbers about memory, flows, sessions, reassembly, etc. - Packet Stats (always returned even if this option is not checked)
Statistics from the pcap including network protocols, application layer protocols, etc. - Alert Debug
Detailed information on what particular rules matched on for each alert. Useful for seeing why an alert fired and/or troubleshooting false positives. - HTTP Log
A log of HTTP requests and responses, showing time, IPs and ports, HTTP method, URI, HTTP version, Host, User-Agent, Referer, response code, response size, etc. By default, each line represents the HTTP request and response all in one. - DNS Log
A log of DNS requests and responses as provided by Suricata. This won't be availble if Suricata is compiled with Rust support or if the version of Suricata is 5.0 or later. - TLS Log
A log of SSL/TLS traffic as provided by Suricata.
- Dump buffers (alerts only)
This will display the contents of buffers used by the detection engines, which can be useful for troubleshooting signature creation with traffic that may not be parsing as expected. Since such output can be voluminous, only buffer content associated with alerts are returned. To see buffer content from more traffic, use rule(s) that match on more traffic (or even a generic rule that matches on all traffic). Snort will output buffer contents into a "Buffer Dump" log output. Suricata works differently and will place contents into "HTTP Buffers", "TLS Buffers" and/or "DNS Buffers". These are Lua script outputs intended to be visually similar than the Snort buffer dump output. However on Suricata the protocol must be specified for the buffer dump to work. Examples:alert http
,alert tls
,alert dns
. - Rule profiling Return per-rule performance statistics. This is data from the engine's rule performance profiling output. This data will show up under the "Performance" tab on the job results page.
- Fast pattern info
- Suricata only. Return fast pattern data about the submitted rules. The Dalton Suricata agent will return a file (displayed in the "Fast Pattern" tab) with details on what the engine is using for the fast pattern match. To generate this, Suricata must do two runs – one to generate the fast pattern info and one to actually run the submitted job so this will approximately double the job run time. Unless fast pattern info is needed for some reason, there isn't a need to check this. Fast pattern data can be voluminous so it is not recommended that this be selected for a large production/pre-defined ruleset.
On the job submission page, the "Config Files" vertical tab provides the ability to edit the configuration file(s) for the sensor:
- Configuration File
The engine configuration file, including variables, that the Dalton agent uses for the job.
If the Override EXTERNAL_NET (set to 'any')
option is selected (on by default), then the EXTERNAL_NET
IP variable will be set to any
when the job is submitted.
See also Updating Sensor Configs.
The job results page allows users to download the job zip file and also presents the results from the job run in a tabulated interface:
- Alerts These are the raw alerts from the sensor.
- Alert Details
IfInclude Detailed Alerts
is selected for a job, detailed output from processing unified2 alert files will be shown here. - EVE JSON (Suricata only)
The EVE log, with syntax highlighting, if EVE logging is enabled. TheFormat
checkbox "pretty-prints" the EVE data; theDark Mode
checkbox applies a dark mode theme/coloring to the EVE data. The UI also dynamically presents checkboxes based on the event types present in the EVE log. These can be used to filter the displayed EVE data. If the EVE data is more than 2000000 bytes, then by default theDark Mode
option is disabled and syntax coloring is turned off, for performance reasons. - IDS Engine
This the raw output from the IDS engine. For Snort jobs, the engine statistics will be in this tab, at the bottom. - Performance
IfRule profiling
is enabled, those results will be included here. - Debug
This is the Debug output from the agent. - Error
If any errors are encountered by the Dalton agent running the job, they will be returned and displayed in this tab and the tab will be selected by default. If there are no errors, this tab will not be shown. - Other logs
If other logs are returned by the agent they will each be displayed in their own tab if they are non-empty.Engine Stats
andPacket Stats
are always returned for Suricata jobs. See discussion in the above "Configuration Options" discussion for more details.
Submitted jobs can be viewed on the "Queue" page. Each test is assigned a quasi-unique sixteen byte Job ID, which is based on the job's runtime parameters. Each recent Job ID is included on the 'Queue' page as a hyperlink for easy access. Queued jobs will be cleared out periodically if an agent has not picked them up; this should not happen unless all agents are down or are unreasonably backlogged. There is additional logic in the Dalton controller to respond appropriately when jobs have timed out or have been interrupted; this should happen rarely, if ever.
Job results are cleared out periodically as well; this option is configurable with the redis_expire
parameter in the dalton.conf
file. Teapot jobs expire timeouts are configured with the teapot_redis_expire
option. After a job has completed, the original job can always be viewed (if it hasn't expired) by accessing the following url:
/dalton/job/<jobid>
A job zip file, which includes the packet capture file(s) submitted along with rules and variables associated with the job, is stored on disk, by default in the /opt/dalton/jobs
directory; this location is configurable via the job_path
parameter in the dalton.conf
file. These files are cleaned up by Dalton based on the redis_expire
and teapot_redis_expire
. Dalton only cleans up job zip files from disk when the Queue
page is loaded. To force the clean up job to run on demand, send a HTTP GET request to:
/dalton/controller_api/delete-old-job-files
A job zip file can be accessed from the appropriate link on the job results page or directly downloaded using the following URL:
/dalton/sensor_api/get_job/<jobid>.zip
Agents (a.k.a. "Sensors") check in to the Dalton server frequently (about every second but configurable in the dalton-agent.conf
file). The last time an agent checked in can be viewed on the Sensors
page. Agents that have not checked in recently will be pruned based on the agent_purge_time
value in the dalton.conf
config file. When an expired or new agent checks in to the Dalton Controller it will be automatically (re)added and made available for job submissions.
The Dalton controller provides a RESTful API to retrieve data about submitted jobs. API responses use JSON or the raw ("RAW") data, and the data returned in the values is, in most cases, just the raw text that is displayed in the Dalton web interface.
JSON API
The JSON API can be utilized via HTTP GET requests in this format:
GET /dalton/controller_api/v2/<jobid>/<key>
For requests, <jobid>
is the Job ID and:
<key> : [alert|alert_debug|alert_detailed|all|debug|dns_log|
error|engine_stats|eve|fast_pattern|http_log|ids|
keyword_perf|other_logs|packet_stats|perf|start_time|
statcode|status|submission_time|tech|time|tls_log|user]
A JSON API request returns JSON with three root elements:
- data
The requested data. If the key is invalid for the job, then an error is returned, along with an error message stating as such. If there is no data for the requested Job ID and key, then thisdata
parameter value is an empty string anderror
is set to false.. - error
[true|false] depending if the API request generated an error. This is not returned as a quoted string. This indicates an error with the API request, not an error running the job. Errors running the job can be found by querying for the 'error' key (see above). - error_msg
null if error is false, otherwise this is a quoted string with the error message.
RAW API
The RAW API can be utilized via the same HTTP GET requests appended with "/raw":
GET /dalton/controller_api/v2/<jobid>/<key>/raw
The <jobid>
and <key>
are the same as the JSON API but a RAW API request returns the raw data from the Redis database, in the response body. This is basically what is returned from the JSON API but not encapsulated or encoded as JSON. For RAW API responses, the Content-Type header is set to "text/plain" with the exception of the "eve" and "all" logs which use "application/json". A RAW request for the "all" key returns a string representation of a Python dictionary with all the key-value pairs. The RAW responses also include "attachment" and "filename" in the Content-Disposition header that prompt browsers to download/save the file.
Valid Keys
- alert - Alert data from the job. This is the same as what is displayed in the "Alerts" tab in the job results page.
- alert_debug - A full alert log containing much information for signature writers or for investigating suspected false positives (Suricata only). This is the same as what is displayed in the "Alert Debug" tab in the job results page.
- alert_detailed - Detailed alert data from the job. This is the same as what is displayed in the "Alert Details" tab in the job results page.
- all - Returns data from all keys (except for "all" of course).
- debug - Debug data from the job. This is the same as what is displayed in the "Debug" tab in the job results page.
- dns_log - A line based log of DNS requests and responses (Suricata only). This is the same as what is displayed in the "DNS Log" tab in the job results page.
- engine_stats - Contains data from various counters of the Suricata engine (Suricata only). This is the same as what is displayed in the "Engine Stats" tab in the job results page.
- error - Error data from the job. This is the same as what is displayed in the "Error" tab in the job results page.
- eve - EVE JSON output from the job (Suricata only). This is the same as what is displayed in the "EVE JSON" tab in the job results page.
- fast_pattern - Fast pattern details for the submitted rules (Suricata only). This is the same as what is displayed in the "Fast Pattern" tab in the job results page.
- http_log - A line based log of HTTP requests (Suricata only). This is the same as what is displayed in the "HTTP Log" tab in the job results page.
- ids - IDS Engine output from the job. This is the same as what is displayed in the "IDS Engine" tab in the job results page. For Snort Agents, engine statistics output at the end of the job run are populated here.
- keyword_perf - Contains data of per keyword profiling (Suricata only). This is the same as what is displayed in the "Keyword Perf" tab in the job results page.
- other_logs - deprecated - Other logs from the job (Suricata only). This is returned as key/value pairs with the key being the name of the log and the value being the contents of the log. This key is deprecated and is not included in the
all
key response. The contents ofother_logs
, e.g. "http_log", "tls_log", etc., can and should be accessed directly. - packet_stats - Statistics from the pcap(s) (Suricata only). This is the same as what is displayed in the "Engine Stats" tab in the job results page.
- perf - Performance data from the job (if the job generated performance data). This is the same as what is displayed in the "Performance" tab in the job results page.
- start_time - The time (epoch) the job was requested by a Dalton agent. This is returned as a string.
statcode - Status code of the job. This is a number returned as a string. If a job doesn't exist, the API will return an error (see below) instead of an "Invalid" statcode. Here is how to interpret the status code:
Code Meaning -1
Invalid
0
Queued
1
Running
2
Done
3
Interrupted 4
Timeout
- status - A string corresponding to the current status of a job. This is used in the Dalton Controller web UI and is what is displayed in the browser when a job is submitted via the web interface to inform the user of the current progress/state of the job. When a job is done, this will actually be a hyperlink saying "Click here to view your results". Unless there is a specific use case, 'statcode' is usually used instead of 'status' for determining the status of a job.
- submission_time - The time (formatted as "%b %d %H:%M:%S") the job was submitted to the Dalton Controller.
- tech - The sensor technology (i.e. engine and version) the job was submitted for, in the format
<engine>/<version>
. For example,suricata/4.0.0
is Suricata v4.0.0. If a custom config is used, it will be added on the end, also separated by a forward slash. For example,suricata/4.0.7/mycustomconfigname
. A Suricata 4 sensor compiled with Rust support will have "rust_" prepended to the version, for example,suricata/rust_4.1.5
. - time - The time in seconds the job took to run, as reported by the Dalton Agent (this includes job download time by the agent). This is returned as a string and is the same as the "Processing Time" displayed in the job results page.
- tls_log - A line based log of TLS handshake parameters (Suricata only). This is the same as what is displayed in the "TLS Log" tab in the job results page.
- user - The user who submitted the job. This will always be "undefined" since authentication is not implemented in this release.
Examples:
JSON API Request:
GET /dalton/controller_api/v2/d1b3b838d41442f6/alert
JSON API Response:
{
"data": "06/26/2017-12:08:13.255103 [**] [1:180043530:4] Nemucod Downloader
Trojan Request Outbound [**] [Classification:
A Network Trojan was detected] [Priority: 1] {TCP} 192.168.1.201:65430
-> 47.91.93.208:80\n\n06/26/2017-12:08:13.255103 [**] [1:180056733:3]
Suspicious HTTP Request to a *.top TLD - Outbound [**] [Classification: Potentially
Bad Traffic] [Priority: 2] {TCP} 192.168.1.201:65430 -> 47.91.93.208:80\n
\n06/26/2017-12:08:13.646674 [**] [1:180043530:4] Nemucod Downloader
Trojan Request Outbound [**] [**] [Classification:
A Network Trojan was detected] [Priority: 1] {TCP} 192.168.1.201:65430
-> 47.91.93.208:80\n\n",
"error_msg": null,
"error": false
}
JSON API Request:
GET /dalton/controller_api/v2/ae42737ab4f52862/ninjalevel
JSON API Response:
RAW API Request:
GET /dalton/controller_api/v2/ae42737ab4f52862/alert/raw
RAW API Response:
12/16/2019-20:03:24.094114 [**] [1:806421601:0] MyMalware C2 Request Outbound [**]
[Classification: (null)] [Priority: 3] {TCP} 192.168.102.203:45661 -> 172.16.31.41:80
In addition to providing information on submitted jobs, the Dalton API includes the ability to pull information from, and perform limited actions on, the Controller. The following routes can be accessed via HTTP GET requests. Full examples are not provided here but can be easily obtained by making the request in a web browser.
- /dalton/controller_api/request_engine_conf?sensor=<sensor>
Returns the requested configuration file as text. The <sensor> value is going to be the engine, version, and, if applicable, the custom config filename, separated by forward slashes. For example:suricata/5.0.0
orsuricata/5.0.0/mycustomconfig.yaml
. Suricata version 4.x compiled with Rust support will have the prefix "rust_" before the version, e.g.suricata/rust_4.1.5
.If no exact match is found for a config file on disk, the closest file that matches is returned. - /dalton/controller_api/delete-old-job-files
Deletes old job files from disk. Returns the number of files deleted. For more info see the Job Queue section. - /dalton/controller_api/job_status/<jobid>
Returns a string corresponding to the current status of a job. This is used by the web browser primarily when a job is running. See the 'status' key information in the Job API section. - /dalton/controller_api/job_status_code/<jobid>
Returns the job status code for the given jobid. This is the job status code number, returned as string.For more details, see the information about 'statcode' in the Job API section. - /dalton/controller_api/get-current-sensors/<engine>
Returns a JSON response with 'sensor_tech' as the root element containing an array of current active sensors, sorted descending based on ruleset filename (just like the list in the web interface).<engine> should besuricata
,snort
, orzeek
.Example response:
- /dalton/controller_api/get-current-sensors-json-full
Response is a JSON payload with details about all the current active sensors (agents). Info includes agent IP, last check-in time, tech (e.g.suricata/4.0.1
), etc. - /dalton/controller_api/get-prod-rulesets/<engine>
Returns a list of current available production rulesets on the Controller for the given engine. The list contains the full path of the rules files on the Controller.<engine> should besuricata
orsnort
Example response:
- /dalton/controller_api/get-max-pcap-files
Returns the maximum number of pcap (or archive) files the controller is configured to process per job submission. This is set by themax_pcap_files
option in dalton.conf and knowing this can be useful to ensure that all pcaps programmatically submitted are going to be processed. A single archive file, even though it can contain multiple pcaps, is only considered a single file in this context. - /dalton/sensor_api/get_job/<jobid>
Returns the job zip file which includes the pcap(s), rule(s), config file, and manifest used by the job referenced by <jobid>. If the <jobid> is invalid or an error occurs, a HTML error page is returned.
Dalton has the concept and capability of what is called a "teapot" job. A teapot job is one that is short lived in the Redis database and (usually) on disk.
Teapot jobs are useful when submitting large number of jobs and/or jobs where the results are immediately processed and there isn't a need to keep them around after that. Often this is utilized in the programmatic submission of jobs combined with using the Dalton API to automatically and/or quickly process the results.
Such job submissions are fleeting and voluminous in number. In other words, short and stout. Like a little teapot.
Teapot jobs differ from regular jobs in a few main ways:
- Results kept for a shorter period of time than regular jobs. Teapot job expire timeouts are configured with the
teapot_redis_expire
option indalton.conf
. - Teapot jobs are submitted using the 'teapotJob' POST parameter (with any value). This parameter is not set or available when submitting jobs via the Dalton web UI.
- Teapot jobs have a job id ("JID") that starts with 'teapot_'.
- The submission of a teapot job results in the JID being returned instead of a redirect page.
Currently, if teapot jobs have not expired, they will show up in the Dalton Queue in the web UI although it would be fairly trivial to change the code to exclude them from the list.
For each Dalton job, a single 'defined ruleset' file can be used and/or 'custom rules'. Custom rules are entered in the Web UI but defined rulesets are stored on disk.
On the Dalton Controller, defined rulesets must be in the directory specified by the ruleset_path
variable in dalton.conf
. By default this is /opt/dalton/rulesets
. Inside that directory there must be a suricata
directory where Suricata rules must be placed and a snort
directory where Snort rules must be placed. The ruleset files must end in .rules
.
If the default ruleset_path
value is not changed from /opt/dalton/rulesets
then the rulesets
directory (and subdirectories) on the host running the Dalton Controller container is shared with the container so '.rules' files can be easily added from the host machine.
Popular open source rule download and management tools such as rulecat, PulledPork, and Suricata-Update make it trivial to download rulesets, combine all rules into a single .rules
file, and then store it in the necessary location.
The Dalton Controller container includes rulecat (see the rulecat_script
variable in dalton.conf
) and when the Dalton Controller first starts up, if there are no existing rulesets, it will attempt to download the latest Suricata and Snort rulesets from rules.emergingthreats.net.
Adding sensors to Dalton is a fairly simple process. If there isn't already a corresponding or compatible configuration file for the new sensor, that will also need to be added; see Adding Sensor Configs for more information and to use custom config files for specific sensors.
Unless a custom configuration is used, (see Adding Sensor Configs), sensors (Agents) request jobs based on their particular engine (Suricata or Snort) and version (e.g. 5.0.0, 2.9.9.0). Submitted jobs are queued based on the (corresponding) "Sensor Version" specified in the user interface. All applicable sensors pull jobs from the Controller from their respective queue, meaning that there can be multiple Agents of the same type (engine and version) and they will all pull from the appropriate shared queue on the Controller and receive/run jobs on a first-come-first-served basis.
The docker-compose.yml
file includes directives to build Dalton Agents for a variety of Suricata and Snort versions. The sensor engines (Suricata or Snort) are built from source. To add a new or different version, just copy one of the existing specifications and change the version number(s) as necessary.
For example, here is the specification for Suricata 3.2.3:
agent-suricata-3.2.3:
build:
context: ./dalton-agent
dockerfile: Dockerfiles/Dockerfile_suricata
args:
- SURI_VERSION=3.2.3
- http_proxy=${http_proxy}
- https_proxy=${https_proxy}
- no_proxy=${no_proxy}
image: suricata-3.2.3:latest
container_name: suricata-3.2.3
environment:
- AGENT_DEBUG=${AGENT_DEBUG}
restart: always
To add a specification for Suricata 4.0.2 (if it exists) just change the SURI_VERSION
arg value from '3.2.3' to '4.0.2'. This will cause that version of Suricata to be downloaded and built. The service name (e.g. 'agent-suricata-3.2.3') container name, and image name should also be updated to be unique. Multiple Agents with the same engine/version can be run by keeping the SURI_VERSION
and image name the same but using different service and container names.
Example Suricata 4.0.2 specification:
agent-suricata-4.0.2:
build:
context: ./dalton-agent
dockerfile: Dockerfiles/Dockerfile_suricata
args:
- SURI_VERSION=4.0.2
- http_proxy=${http_proxy}
- https_proxy=${https_proxy}
- no_proxy=${no_proxy}
image: suricata-4.0.2:latest
container_name: suricata-4.0.2
environment:
- AGENT_DEBUG=${AGENT_DEBUG}
restart: always
Rust support was added in Suricata 4.0 but is optional. Starting with Suricata 5.0.0, Rust is manditory. To turn on Rust support for a Suricata 4.x Agent, set the ENABLE_RUST
arg in the docker-compose file to --enable-rust
for that particular Agent specification (see below example). Suricata 4.x Agents that have Rust support will show up in the Web UI alongside the string, "with Rust support".
Example Suricata 4.1.4 specification with Rust support:
agent-suricata-4.1.4-rust:
build:
context: ./dalton-agent
dockerfile: Dockerfiles/Dockerfile_suricata
args:
- SURI_VERSION=4.1.4
- http_proxy=${http_proxy}
- https_proxy=${https_proxy}
- no_proxy=${no_proxy}
- ENABLE_RUST=--enable-rust
image: suricata-4.1.4-rust:latest
container_name: suricata-4.1.4-rust
environment:
- AGENT_DEBUG=${AGENT_DEBUG}
restart: always
Suricata can also have SURI_VERSION=current
in which case the latest Suricata version will be used to build the Agent. Having a 'current' Suricata version specification in the docker-compose.yml
file is especially convenient since when a new version comes out, all that has to be done is run the start-dalton.sh
script and a new Dalton Agent with the latest Suricata version will be built and available.
Snort agents are the same way but the args to customize are SNORT_VERSION
and, if changed, DAQ_VERSION
. Example Snort specification:
# Snort 2.9.11 from source
agent-snort-2.9.11:
build:
context: ./dalton-agent
dockerfile: Dockerfiles/Dockerfile_snort
args:
- SNORT_VERSION=2.9.11
- DAQ_VERSION=2.0.6
- http_proxy=${http_proxy}
- https_proxy=${https_proxy}
- no_proxy=${no_proxy}
image: snort-2.9.11:latest
container_name: snort-2.9.11
environment:
- AGENT_DEBUG=${AGENT_DEBUG}
restart: always
Suricata Agents should build off the Suricata Dockerfile, Dockerfiles/Dockerfile_suricata_rust
.
Snort Agents should build off the Snort Dockerfile at Dockerfiles/Dockerfile_snort
.
Sensors don't have to be Docker containers or part of the docker-compose network to be used by the Dalton Controller; they just have to be able to access and talk with the Docker Controller webserver.
A Suricata or Snort machine can be turned into a Dalton Agent fairly easily. Requirements:
- Engine (Suricata or Snort)
- Python 3.6 or later
dalton-agent.py
dalton-agent.conf
The dalton-agent.conf
file must be modified to point to the Docker Controller (see DALTON_API
option).
For more details on the Dalton Agent configuration options, see the inline comments in the dalton-agent.conf
file.
To start the Dalton Agent, run dalton-agent.py:
Usage: dalton-agent.py [options]
Options:
-h, --help show this help message and exit
-c CONFIGFILE, --config=CONFIGFILE
path to config file [default: dalton-agent.conf]
Sensor configuration files (e.g. suricata.yaml
or snort.conf
) are stored on the Dalton Controller. When a sensor checks in to the Controller, it is registered in Redis and when that sensor is selected for a Dalton job, the corresponding config file is loaded, populated under the Config Files
vertical tab in the Web UI, and submitted with the Dalton job.
The Dalton Controller uses the engine_conf_path
variable from dalton.conf
to use as a starting location on the filesystem to find sensor configuration files to use. Inside that directory there must be a suricata
directory where the Suricata .yaml
files go and a snort
directory where the Snort .conf
files go.
By default, on the Controller, engine_conf_path
is set to /opt/dalton/app/static/engine-configs
which is symlinked from /opt/dalton/engine-configs
. The Dalton Controller and host also share the engine-configs
directory to make it easy to add config files as needed from the host.
It is recommended that the engine_conf_path
not be changed since Flask looks in the static
directory to serve the config files and changing it will mostly like break something.
Sensor configuration files are not automatically added when Agents are built or the Controller is run; they must be manually added. However, the Dalton Controller already comes with the default (from source) config files for Suricata versions 0.8.1 and later, and for Snort 2.9.0 and later. Duplicate config files are not included. For example, since all the Suricata 1.4.x versions have the same (default) .yaml file, only "suricata-1.4.yaml" is included.
The Controller attempts to find a config file to load/use based off the sensor engine (Suricata or Snort) and version number (e.g. 5.0.0, 2.9.9.0).
For example, if an Agent is running Suricata version 5.0.0, then the Controller will look for a file with the name "suricata-5.0.0.yaml" in the engine-configs/suricata/
directory. If it can't find an exact match, it will attempt to find the closest match it can based off the version number.
If a custom config is desired to be used by a particular sensor, set the SENSOR_CONFIG
variable in the Agent's dalton-agent.conf
file and place a file with the same name on the Controller in the engine-configs/suricata/
directory (for Suricata) or engine-configs/snort/
directory (for Snort). If the SENSOR_CONFIG
value does not exactly match a config file on the Controller, the Controller will look for filesnames with the SENSOR_CONFIG value and extensions ".yaml", ".yml", and ".conf".
For new Suricata releases, the .yaml
file from source should just be added to the engine-configs/suricata
directory and named appropriately. For new Snort releases, it is recommended that the default .conf
file be run thru the clean_snort_config.py
script located in the engine-configs/
directory:
Usage:
python clean_snort_config.py <in-file> <out-file>
By default, the Dalton Controller logs to /var/log/dalton.log
and Dalton Agents log to /var/log/dalton-agent.log
. The nginx container logs to the /var/log/nginx
directory (dalton-access.log
and dalton-error.log
). The (frequent) polling that Dalton Agents do to the nginx container to check for new jobs is intentionally not logged since it is considered too noisy.
For the Dalton Controller, debugging can be enabled in dalton.conf
file or by setting the CONTROLLER_DEBUG
environment variable (e.g. CONTROLLER_DEBUG=1
. This can also be passed during the container build process and set in the .env
file. If either the config file or environment variable has debugging set, debug logging will be enabled.
For the Dalton Controller, debugging can be enabled in dalton-agent.conf
file or by setting the AGENT_DEBUG
environment variable (e.g. AGENT_DEBUG=1
. This can also be passed during the container build process and set in the .env
file. If either the config file or environment variable has debugging set, debug logging will be enabled.
Dalton includes a Web UI for Flowsynth , a tool that facilitates network packet capture creation. The flowsynth Web UI makes it trivial to model network traffic and test it against a Dalton Agent.
Accessing the Flowsynth WebUI can be done via the 'Flowsynth' link in the Dalton toolbar, or directly using the '/flowsynth' URI path. The flowsynth UI has two modes of operation: Build and Compile. The build mode provides a wizard-like interface for creating certain types of pcaps. The compile mode provides a direct interface to the flowsynth compiler, allowing for the building of synth files directly in the UI.
The Flowsynth Build mode allows for quick pcap generation using some sensible defaults. On the 'Network Layer' vertical tab, the source and destination IP ranges can be selected. An IP address is chosen at random from these ranges. On the 'Transport Layer' vertical tab is the ability to choose between TCP and UDP, and optionally establish the TCP connection with a three-way handshake. Destination and Source ports are chosen at random, or can be set explicitly. The 'Payload' vertical tab allows the user to easily build some common payloads. The wizards generate flowsynth syntax language, and populate the 'Compile' tab with the content to allow for any last minute changes prior to compilation.
Binary, non-printable, and printable bytes can be represented using Hexadecimal escape sequences (xhh). Such encoding are converted to their representative bytes when the pcap is compiled. For example, 'x41' becomes 'A'.
The raw payload wizard allows a user to rapidly model two-way communication between a client and server. It is often useful for modeling custom protocols and/or binary protocols.
The HTTP wizard makes it simple to build HTTP client requests and HTTP server responses. The payload prompts for two types of input, an HTTP header section and a HTTP body section.
If the 'Autocompute request Content-Length header' and/or 'Autocompute response Content-Length header' is selected, the wizard will compute and add a Content-Length header based on the HTTP body data. If a Content-Length header already exists in the HTTP Header data, it will be updated to reflect the correct size of the corresponding HTTP body. If the request body is empty, a "Content-Length: 0" header will not be added; if a response body is empty, a "Content-Length: 0" header will be added.
The Certificate wizard makes it trivial to generate a partial SSL/TLS handshake using a user-supplied certificate.
Compile mode provides a direct interface to the flowsynth compiler, allowing for the building of synth files directly in the UI. The compile mode UI is populated by the build mode wizards. After the synth has been submitted, a pcap will be generated and a download link provided. The pcap can also be directly submitted from the web interface to Dalton, to be used in a Suricata or Snort job.
Dalton now supports Zeek as a sensor as of version 3.2.0. There is limited support in the API and configurations/rulesets cannot be changed at runtime from the UI. However, Zeek scripts can be added in the rulesets directory and will be executed with every run.
- Why is it named 'Dalton'?
Dalton is the name of Patrick Swayze's character in the movie "Road House". - How do I configure the Dalton Controller to listen on a different port?
The external listen port of the Dalton Controller can be set in the.env
file in the repository root. The Dalton Controller and nginx containers must be rebuilt for the change to take effect (just runstart_dalton.sh
). - Is SSL/TLS supported?
SSL/TLS can be configured for the Web UI. See Enabling SSL/TLS on the Controller. - Will this work on Windows?
The native Dalton code won't work as expected on Windows without non-trivial code changes. However, if the Linux containers can run on Windows, then it should be possible to get containers working on a Windows host. But this has not been tested. - What is the difference between an "engine", "sensor", and "agent"?
In this context those terms, for the most part, mean the same thing. Technically, you can think of "engine" as the IDS engine, in this case Suricata or Snort; "sensor" as the system running the engine; and "agent" as a specific system running the Dalton Agent code and checking in to the Dalton Controller. "Sensor" and "Agent" are very often used interchangeably. - Is there Dalton Agent support for Snort version < 2.9?
Currently no. Dalton Agents that run Snort utilize the 'dump' DAQ to replay pcaps and DAQ wasn't introduced until Snort 2.9. Dalton Agents for older Snort versions (e.g. 2.4) have been written in the past but are not part of this open source release. However, if there is a demand for such support, then adding support for older Snort versions will be reconsidered. - So then is Snort 3 supported?
Not at this time. Snort 3 support is certainly possible and is being considered. - Does Dalton support authentication such as username/password/API tokens or authorization enforcement like discretionary access control?
No, not in this open source release although such additions have been done before, including single sign on integration. However, such enhancements would require non-trivial code additions. There are some authentication decorators commented out and scattered throughout the code and the Dalton Agents do send an API token as part of their requests but the Dalton Controller doesn't validate it. The lack of authentication and authorization does mean that it isn't difficult for malicious actors to flood the Controller, submit malformed jobs, corrupt job results, dequeue jobs, and DoS the application. - How can I programmatically submit a job to Dalton?
Right now, a programmatic submission must mimic a Web UI submission. In the future, a more streamlined and easier to use submission API may be exposed. Feel free to submit a pull request with this feature. - When I submit jobs to Suricata Agents with multiple pcaps, the job zipfile only has one pcap. What's going on?
In read pcap mode, which is how the Suricata and Snort engines process pcaps, older version of Suricata only support the reading of a single pcap. Therefore, for jobs submitted to such older Suricata Agents, to support multiple pcaps in the same Suricata job, the Dalton Controller will combine the pcaps into a single file before making the job available for Agents to grab. By default, the pcap merging is done with mergecap. For more details see Packet Captures. - Can I have more than one Agent with the same engine/version? For example, can I have multiple Agents running Suricata 4.0.1?
Of course. If you use the Agent containers and Docker Compose, make sure that the service and container name are unique between sensors. Agents poll a queue on the Dalton controller for jobs based on their "TECHNOLOGY" (typically engine and version) and multiple Agents can poll the same queue. Pending jobs are given to the first Agent that requests them. - Why is it that when I try to build a Snort 2.9.0 or 2.9.0.x container, it fails when configuring Snort saying it can't find the 'dnet' files?
Attempting to build Snort 2.9.0 and 2.9.0.x will fail because Autoconf can't find the dnet files. This was apparently fixed in Snort 2.9.1 and later. If you really want a Snort 2.9.0 or 2.9.0.x Agent, you will have to build one out yourself. The Dalton Agent code should work fine on it. If it turns out that there is a lot of demand for Snort 2.9.0.x Agents, adding native support for it will be reconsidered. - Regarding the code ... why did you do that like that? What were you thinking? Do you even know about object-oriented programming?
These are valid questions. Much of the code was written many years ago when the author was new to Python, never having written any Python code before other than tweaking a few lines of code in existing projects, and unaware of Python's object-oriented support. While such code could be cleaned up and refactored, a lot of it was left as-is since it already worked and it was decided that time and effort should be spent elsewhere. Additionally, the Dalton Agent code was originally written to run on restricted/custom systems that only had Python 2.4 support and couldn't use non-standard libraries. This is especially noticeable (painful?) with the use of urllib2 instead of urllib3 or Requests. Therefore, if you do review the code, it is requested that you approach it with a spirit of charity. - I found a bug in Dalton. What should I do?
Feel free to report it and/or fix it and submit a pull request.
- David Wharton
- Will Urbanski
- Rob Vinson
- George P. Burdell
- Adam Mosesso
- Donald Campbell
Feedback including bug reports, suggestions, improvements, questions, etc. is welcome.