Nishant Sahay (NishantSahay7)

NishantSahay7

Geek Repo

Github PK Tool:Github PK Tool

Nishant Sahay's repositories

Convolution-Encoder-and-Decoder-using-Trellis-Tree-using-Verilog-in-Xilinx-ISE

Convolutional codes are often described as continuous. However, it may also be said that convolutional codes have arbitrary block length, rather than being continuous, since most real-world convolutional encoding is performed on blocks of data. Convolutionally encoded block codes typically employ termination. The arbitrary block length of convolutional codes can also be contrasted to classic block codes, which generally have fixed block lengths that are determined by algebraic properties.

License:MITStargazers:2Issues:1Issues:0

Automated-Gardening-using-ATMEGA32

It is about sensing the soil moisture of the soil using a sensor, and if the soil is dry, start the water pump to pump the water to the plant, and wait for the moisture level to go High, as soon as it goes beyond a specified limit, the motor is turned off. The Soil moisture sensor is self made, and in order to provide power to the motor driver there is a full bridge rectifier designed.

Language:CLicense:MITStargazers:0Issues:1Issues:0

Complete-Python-3-Bootcamp

Course Files for Complete Python 3 Bootcamp Course on Udemy

Language:Jupyter NotebookStargazers:0Issues:1Issues:0

Conversion-of-Analog-value-into-Degrees-from-the-ADXL335-Triple-axis-linear-Accelerometer

It shows the conversion of Analog value from ADXL335 in terms of Degrees

Language:CLicense:MITStargazers:0Issues:1Issues:0

ESP-Weather-Underground-Sensor-Upload

Using an ESP32/ESP8266 to upload sensor data to your Weather Underground PWS

Language:C++Stargazers:0Issues:1Issues:0

ESP8266

ESP8266 Projects

Language:C++Stargazers:0Issues:0Issues:0

Home-Automation-Using-Google-Assistant-Adafruit-MQTT-and-IFTTT

Its uses Adafruit MQTT Protocol to Turn the Appliances on or off based on the command given by the Google assistant, and this if and then condition is controlled by IFTTT.

Language:C++License:MITStargazers:0Issues:1Issues:0

RC5-Sensor-Controlled-Car-using-ATMEGA32

Transmitting end uses a TV remote through which IR commands are transmitted. At the receiver end, these commands are used for controlling the robot in all directions such as forward, backward and left or right etc. At the receiving end the movement is achieved by two motors that are interfaced to the microcontroller.

Language:CLicense:MITStargazers:0Issues:1Issues:0

Servo-Library-Servo.h

Servo Library for Atmega32

Language:MakefileLicense:MITStargazers:0Issues:1Issues:0
License:MITStargazers:0Issues:1Issues:0