MMM-weconnectid

A module to integrale informations from We Connect ID into the MagicMirror.

Alternative
Usage
Tested with
Pictures

I currently don't have a MM so notify me when something is not working. Feel free to send an merge request.

Alternative

This Module:

Advantage:

Works with every Python Version

Disadvantage:

No Pictures of your own car (Always a white ID.3)
No Location of the Car

Alternative Module:

Advantage:

Will use the Pictures provided by the API
Location of your Car

Disadvantage:

Only works with Python 3.9 or higher

Usage

Installation

You have to register your VW ID at MyVolkswagen and have a valid WE Connect ID subscription
You need Python to connect to the Api. You can have a look here on how to install it. Short it works like this, but normally you should already have python2 and/or python3 installed by default, so you normally don't need to install it:

cd ~
wget https://www.python.org/ftp/python/3.9.15/Python-3.9.15.tgz
tar -zxvf Python-3.9.15.tgz
cd Python-3.9.15
./configure --enable-optimizations
sudo make altinstall

To use this module, clone this repository to your modules folder of your MagicMirror:

cd ~/MagicMirror/modules
git clone https://github.com/NikolasRupp/MMM-weconnectid-alt.git

Now just add the module to your config.js file (config entries).

Configuration

The module needs the default configuration block in your config.js to work.

{
  module: 'MMM-weconnectid',
  position: "top_left",
  config: {
    username: "",
    password: "",
    vin: "",
    fields: '{"SOC":"remainingSoC","RANGE":"remainingKm","CLIMATE":"climatisation","ODOMETER":"odometer","LOADING TIME":"remainingTime","TARGET SOC":"targetSoC","LOADING POWER":"chargePower","KMPH":"chargekmph"}',
    fields_charging : ["LOADING TIME","TARGET SOC","LOADING POWER","KMPH"],
    number: 4,
    python: "python3",
    maxHeight: "300px",
    maxWidth: "800px",
    remainingSOCyellow: 70,
    remainingSOCred: 20,
    barstyle: "fluent",
    updateFrequency: 600000,
    timestamp: true,
  }
},

The following properties can be configured:

Option	Description	Options	Default	Required	Type
username	Your Login E-Mail	-	-	yes	Text
password	Your Login Password	-	-	yes	Text
vin	The VIN of your Vehicle	-	-	yes	Text
fields	Fields that should be shown More Information	-	'{"SOC":"remainingSoC","RANGE":"remainingKm","CLIMATE":"climatisation","ODOMETER":"odometer","LOADING TIME":"remainingTime","TARGET SOC":"targetSoC","LOADING POWER":"chargePower","KMPH":"chargekmph","POSITION":"position"}'	no	Text
fields_charging	Fields that should be shown during charging More Information	-	["LOADING TIME","TARGET SOC","LOADING POWER","KMPH"]	no	List
number	Number of fields in each row	Any Number	4	no	Number
python	Python u want to use	Any Python higher than 3.9	"python3"	no	Text
maxHeight	Max Height of the Pictures	Any px or % value	"300px"	no	Text
maxWidth	Max Width of the Pictures	Any px or % value	"800px"	no	Text
remainingSOCyellow	Percentage when the Progress Bar of the Battery should be yellow	0-100	70	no	Number
remainingSOCred	Percentage when the Progress Bar of the Battery should be red	0-100	20	no	Number
barstyle	Style of the Progress Bar	"fluent", "strict"	"fluent"	no	Text
updateFrequency	Update Frequency	Any Value	600000	no	Number
timestamp	If the Timestamp should be shown. It shows the Date and time when the last update from the car was sent to the VW Server and the Time of the last Update of the Widget	true, false	true	no	Boolean

Fields

You can define which fields you want to see. The Format hast to be valid Json. The key will be used as the Header in the Table. You can Name that whatever you like. If you name them like in the default they will be translated vie the translation file.

The following Attributes are available:

Value	Description
bonnetDoor	Status of the Bonnet Door (Will also be shown in the Image, so not really necessary)
trunkDoor	Status of the Trunk Door (Will also be shown in the Image, so not really necessary)
frontLeftDoor	Status of the Front Left Door (Will also be shown in the Image, so not really necessary)
frontRightDoor	Status of the Front Right Door (Will also be shown in the Image, so not really necessary)
rearLeftDoor	Status of the Rear Left Door (Will also be shown in the Image, so not really necessary)
rearRightDoor	Status of the Rear Right Door (Will also be shown in the Image, so not really necessary)
overallStatus	If the Vehicle is locked (Will also be shown in the Image, so not really necessary)
frontLeftWindow	Status of the Front Left Window (Will also be shown in the Image, so not really necessary)
frontRightWindow	Status of the Front Right Window (Will also be shown in the Image, so not really necessary)
rearLeftWindow	Status of the Rear Left Window (Will also be shown in the Image, so not really necessary)
rearLRightWindow	Status of the Rear Right Window (Will also be shown in the Image, so not really necessary)
chargePower	Current Charging Power in kWh
chargingState	Current Charging State
remainingSoC	Remaining SoC in %
remainingTime	Remaining Charging Time in h:mm
remainingKm	Remaining km
targetSoC	Target SoC in %
chargekmph	Charging ... km/h
leftLight	Status of left Light
rightLight	Status of Right Light
odometer	Odometer in km
climatisation	Status of Climatisation (Will show the selected Temperature in °C if On

If you want, that some Values like the remaining charging time will only be displayed during charging you can add the header to the list of the fields_charging Parameter.