Neonox31 / heating-valve

DIY floor heating valve based on ESP8266 implementation of Homie

ESP8266 Heating Valve

An Homie (https://github.com/marvinroger/homie-esp8266) based program to control homemade heating valves using a Wemos D1 mini, an ULN2003 chip, and a 28BYJ-48 stepper motor.

Getting Started

These instructions will get you a copy of the project up and running on your local machine for development and testing purposes.

Prerequisites

This project is genrated with PlatformIO, so please install it before.

Installing

git clone https://github.com/Neonox31/esp8266-floor-heating-valve.git
cd esp8266-floor-heating-valve
pio init

Configure

set -x DEVICE_NAME "My Device Name"
set -x DEVICE_ID my-device-id
set -x WIFI_SSID my-ssid
set -x WIFI_PASSWORD my-password
envsubst < homie-config.json > private-config.json
curl -X PUT http://192.168.123.1/config --header "Content-Type: application/json" -d @private-config.json