NelsenEW / esp-stream-jpg

ESP32 CAM http-stream boilerplate with esp-idf

Example esp_stream_jpg

Creates a http server and listen to GET requests at http://[board-ip]/stream.jpg with WIFI-STA mode. When the request is triggered, it streams QVGA JPEG image from the camera.

Requirements

• ESP-IDF (V4.4)
• esp32-camera repository as a submodule

Instructions

1. Clone the repository including submodules

git clone --recursive https://github.com/NelsenEW/esp_stream_jpg.git

2. Configure your WiFi SSID and Password via idf.py menuconfig

Notes

• All camera pins are configured by default accordingly to A.I. Thinker and you can check then inside Kconfig.projbuild.
• Make sure to read sdkconfig.defaults file to get a grasp of required configurations to enable PSRAM and set it to 64MBit. PSRAM configuration should be added directly to sdkconfig once the menuconfig is done.

TO-DO

• add AP-Mode capabilities (Currently, it only support STA mode).