Crab
Crab is an open source network scanning tool for tracking, gathering information, and scanning a host.
Crab can complete multiple tasks such as port scanning, ip look ups, whois registar info, and OS detection(beta).
Disclaimer
I am not responsible for whoever uses this program unlawfully.
This project is open source and anyone can use it/edit it.
Installation
To install crab you will need
- Python3 or up
- pip
- git
Clone Crab onto your machine
git clone https://gitub.com/N0tA1dan/crab
Next cd into the directory
cd crab
Then cd into the src directory
cd src
Install the requirements
pip install -r requirements.txt
Finally run the file
python crab.py
Usage
To list all the commands type the command below in a terminal
python crab.py -h
Now the port scanning can get a bit tricky
python crab.py -sA [your target] [timeout in seconds]
We need the timeout in seconds because the program goes really fast and uses a lot of processing power. I personally use 0.5 second time out but it may vary from systems. If you have a weak computer, increase the timeout.