Kit is intended for evaluation of new Intel’s FPGA family Cyclone 10 GX.
It has FMC connector with many LVDS channels and 2x SFP/SFP+ connectors for 1G/10G Ethernet. FMC connector allows to connect different modules (video, ADC, DAC, etc…). SFP/SFP+ ports support also Direct Attach cables, not only SFP/SFP+ modules.
Project page, board images and contacts - https://genrnd.com/projects/07e10005/
- Cyclone 10GX family features evaluation
- 1G/10G Ethernet traffic processing
- Real-time processing of video signal
- Real-time DSP processing of analogue signals from one or more ADCs.
- Capturing of information from ADC through 1G/10G Ethernet
- FMC connector for LVDS interfaces: fully compatible with LPC (Low Pin Count) according to VITA57
- Number of LVDS interfaces: 58x LVDS (HPC) + 20 single
- LVDS speed: up to 1.434 Gbps
- 2xSFP/SFP+ for 1G/10G Ethernet connection
- Direct Attach support
- Built-in 1G/10G PHY in FPGA chip. PHY power consumption on 10G speed – 168 mW
- JTAG (10-pin) for FPGA debugging
- USB for firmware update
- Firmware update controller: STM32 MCU
- 10CX150YF672E6G
- Migration chips: 10CX105YF672E6G, 10CX220YF672E6G
- Configuration flash: QSPI 256 Mbit
- Firmware update: JTAG, USB
- Clock sources: 156.25 МГц, 100 МHz
- External AC/DC apaters 12 V
- Estimate consumption: less than 8 W
- Length: 130 mm (5.1”)
- Width: 100 mm (4”)
- Weight: ~100 g.