MrPivato / gd32vf10xx-pio

GD32VF10xx Platformio Template Project

GD32VF10xx Platformio Template Project

NOTE: Tested with the Sipeed Longan Nano Dev-Board

Needed Packages

Apart from the Platformio/VsCode install, run: sudo apt install libusb-dev stm32flash binutils build-essential.

Don't forget to add the udev rules too:

curl -fsSL https://raw.githubusercontent.com/platformio/platformio-core/develop/platformio/assets/system/99-platformio-udev.rules | sudo tee /etc/udev/rules.d/99-platformio-udev.rules

sudo service udev restart

sudo usermod -a -G dialout $USER
sudo usermod -a -G plugdev $USER
# now log out and log in

Needed Tools

Any FTDI or Usb to TTL module should do.

Connections

USB to TTL	Dev Board
GND	GND
3V3	3V3
RXD	TX
TXD	RX

Flashing

1. Enter bootloader mode by first holding down the RESET and BOOT buttons and then release them in same order.

2. Click the Platformio: Upload button or run the pio run -t upload.

Serial Debug

TODO

On-Chip Debug

TODO