si-scale
Format value with units according to SI (système international d’unités).
Version requirement: rustc 1.50+
[dependencies]
si-scale = "0.1"
Getting started
This crate parses and formats numbers using the SI Scales: from 1 y (yocto, i.e. 1e-24) to 1 Y (Yotta, i.e. 1e24). It is essentially agnostic of units per-se; you can totally keep representing units with strings or uom, or something else.
Pre-defined helper functions
You can use one of the predefined helper functions to format numbers:
use si_scale::helpers::{seconds, seconds3};
let actual = format!("{}", seconds(1.3e-5));
let expected = "13 µs";
assert_eq!(actual, expected);
let actual = format!("{}", seconds3(1.3e-5));
let expected = "13.000 µs";
assert_eq!(actual, expected);
Currently the helper functions are:
helper fn | mantissa | prefix constraint | base | groupings | example |
---|---|---|---|---|---|
number_() |
"{}" |
UnitOnly |
B1000 | _ |
1.234567 , 16 |
--- | -- | --- | --- | --- | --- |
seconds() |
"{}" |
UnitAndBelow |
B1000 | none | 1.234567 µs , 16 ms |
seconds3() |
"{:.3}" |
UnitAndBelow |
B1000 | none | 1.235 µs , 16.000 ms |
--- | -- | --- | --- | --- | --- |
bytes() |
"{}" |
UnitAndAbove |
B1000 | _ |
1.234_567 kB |
bytes_() |
"{}" |
UnitOnly |
B1000 | _ |
1_234_567 B |
bytes1() |
"{:.1}" |
UnitAndAbove |
B1000 | none | 2.3 TB |
--- | -- | --- | --- | --- | --- |
bibytes() |
"{}" |
UnitAndAbove |
B1024 | _ |
1.234_567 MiB |
bibytes1() |
"{:.1}" |
UnitAndAbove |
B1024 | none | 1.2 GiB |
- The prefix constraint reduces the possible scales for a value (it is
"unit" like in 1, not like in units of measurements). For instance,
UnitOnly
means the provided value won't be scaled: if you provide a value larger than 1000, say 1234, it will be printed as 1234. TheUnitAndBelow
constraint means the provided value won't use upper scales such as kilo, Mega, Tera, etc, but a small value will be scaled: 16 µs could be displayed, but not 16 Gs. - Base B1000 means 1k = 1000, the base B1024 means 1k = 1024
- Groupings refer to "thousands groupings"; the provided char will be used (for instance 1234 is displayed as 1_234), if none, the value is displayed 1234.
- The mantissa format string only acts on the mantissa:
"{}"
will display the value with all its digits or no digits if it is round, and"{:.1}"
for instance will always display one decimal.
Custom helper functions
To define your own format function, use the
scale_fn!()
macro. All pre-defined helper
functions from this crate are defined using this macro.
For instance, let's define a formatting function for bits per sec which prints the mantissa with 2 decimals, and also uses base 1024 (where 1 ki = 1024). Note that although we define the function in a separate module, this is not a requirement.
mod unit_fmt {
use si_scale::scale_fn;
use si_scale::prelude::Value;
// defines the `bits_per_sec()` function
scale_fn!(bits_per_sec,
base: B1024,
constraint: UnitAndAbove,
mantissa_fmt: "{:.2}",
groupings: '_',
unit: "bit/s");
}
use unit_fmt::bits_per_sec;
fn main() {
let x = 2.1 * 1024 as f32;
let actual = format!("throughput: {:>15}", bits_per_sec(x));
let expected = "throughput: 2.10 kibit/s";
assert_eq!(actual, expected);
let x = 2;
let actual = format!("throughput: {}", bits_per_sec(x));
let expected = "throughput: 2.00 bit/s";
assert_eq!(actual, expected);
}
You can omit the groupings
argument of the macro to not separate
thousands.
SI Scales
With base = 1000, 1k = 1000, 1M = 1_000_000, 1m = 0.001, 1µ = 0.000_001, etc.
min (incl.) | max (excl.) | magnitude | prefix |
---|---|---|---|
.. | .. | -24 | Prefix::Yocto |
.. | .. | -21 | Prefix::Zepto |
.. | .. | -18 | Prefix::Atto |
.. | .. | -15 | Prefix::Femto |
.. | .. | -12 | Prefix::Pico |
.. | .. | -9 | Prefix::Nano |
0.000_001 | 0.001 | -6 | Prefix::Micro |
0.001 | 1 | -3 | Prefix::Milli |
1 | 1_000 | 0 | Prefix::Unit |
1000 | 1_000_000 | 3 | Prefix::Kilo |
1_000_000 | 1_000_000_000 | 6 | Prefix::Mega |
.. | .. | 9 | Prefix::Giga |
.. | .. | 12 | Prefix::Tera |
.. | .. | 15 | Prefix::Peta |
.. | .. | 18 | Prefix::Exa |
.. | .. | 21 | Prefix::Zetta |
.. | .. | 24 | Prefix::Yotta |
The base is usually 1000, but can also be 1024 (bibytes).
With base = 1024, 1ki = 1024, 1Mi = 1024 * 1024, etc.
Overview
The central representation is the Value
type,
which holds
- the mantissa,
- the SI unit prefix (such as "kilo", "Mega", etc),
- and the base which represents the cases where "1 k" means 1000 (most common) and the cases where "1 k" means 1024 (for kiB, MiB, etc).
This crate provides 2 APIs: a low-level API, and a high-level API for convenience.
For the low-level API, the typical use case is
-
first parse a number into a
Value
. For doing this, you have to specify the base, and maybe some constraint on the SI scales. SeeValue::new()
andValue::new_with()
-
then display the
Value
either by yourself formatting the mantissa and prefix (implements thefmt::Display
trait), or using the provided Formatter.
For the high-level API, the typical use cases are
-
parse and display a number using the provided functions such as
bibytes()
,bytes()
orseconds()
, they will choose for each number the most appropriate SI scale. -
In case you want the same control granularity as the low-level API (e.g. constraining the scale in some way, using some base, specific mantissa formatting), then you can build a custom function using the provided macro
scale_fn!()
. The existing functions such asbibytes()
,bytes()
,seconds()
are all built using this same macro.
The high-level API
The seconds3()
function parses a number into a Value
and displays it
using 3 decimals and the appropriate scale for seconds (UnitAndBelow
),
so that non-sensical scales such as kilo-seconds can't be output. The
seconds()
function does the same but formats the mantissa with the
default "{}"
, so no decimals are printed for integer mantissa.
use si_scale::helpers::{seconds, seconds3};
let actual = format!("result is {:>15}", seconds(1234.5678));
let expected = "result is 1234.5678 s";
assert_eq!(actual, expected);
let actual = format!("result is {:>10}", seconds3(12.3e-7));
let expected = "result is 1.230 µs";
assert_eq!(actual, expected);
The bytes()
function parses a number into a Value
using base 1000
and displays it using 1 decimal and the appropriate scale for bytes
(UnitAndAbove
), so that non-sensical scales such as milli-bytes may not
appear.
use si_scale::helpers::{bytes, bytes1};
let actual = format!("result is {}", bytes1(12_345_678));
let expected = "result is 12.3 MB";
assert_eq!(actual, expected);
let actual = format!("result is {:>10}", bytes(16));
let expected = "result is 16 B";
assert_eq!(actual, expected);
let actual = format!("result is {}", bytes(0.12));
let expected = "result is 0.12 B";
assert_eq!(actual, expected);
The bibytes1()
function parses a number into a Value
using base 1024
and displays it using 1 decimal and the appropriate scale for bytes
(UnitAndAbove
), so that non-sensical scales such as milli-bytes may not
appear.
use si_scale::helpers::{bibytes, bibytes1};
let actual = format!("result is {}", bibytes1(12_345_678));
let expected = "result is 11.8 MiB";
assert_eq!(actual, expected);
let actual = format!("result is {}", bibytes(16 * 1024));
let expected = "result is 16 kiB";
assert_eq!(actual, expected);
let actual = format!("result is {:>10}", bibytes1(16));
let expected = "result is 16.0 B";
assert_eq!(actual, expected);
let actual = format!("result is {}", bibytes(0.12));
let expected = "result is 0.12 B";
assert_eq!(actual, expected);
The low-level API
Value
with Value::new()
Creating a The low-level function Value::new()
converts any number convertible to f64 into a Value
using base 1000. The
Value
struct implements From
for common numbers and delegates to
Value::new()
, so they are equivalent in practice. Here are a few
examples.
use std::convert::From;
use si_scale::prelude::*;
let actual = Value::from(0.123);
let expected = Value {
mantissa: 123f64,
prefix: Prefix::Milli,
base: Base::B1000,
};
assert_eq!(actual, expected);
assert_eq!(Value::new(0.123), expected);
let actual: Value = 0.123.into();
assert_eq!(actual, expected);
let actual: Value = 1300i32.into();
let expected = Value {
mantissa: 1.3f64,
prefix: Prefix::Kilo,
base: Base::B1000,
};
assert_eq!(actual, expected);
let actual: Vec<Value> = vec![0.123f64, -1.5e28]
.iter().map(|n| n.into()).collect();
let expected = vec![
Value {
mantissa: 123f64,
prefix: Prefix::Milli,
base: Base::B1000,
},
Value {
mantissa: -1.5e4f64,
prefix: Prefix::Yotta,
base: Base::B1000,
},
];
assert_eq!(actual, expected);
As you can see in the last example, values which scale are outside of the SI prefixes are represented using the closest SI prefix.
Value
with Value::new_with()
Creating a The low-level Value::new_with()
operates similarly to Value::new()
but
also expects a base and a constraint on the scales you want to use. In
comparison with the simple Value::new()
, this allows base 1024 scaling
(for kiB, MiB, etc) and preventing upper scales for seconds or lower
scales for integral units such as bytes (e.g. avoid writing 1300 sec as
1.3 ks or 0.415 B as 415 mB).
use si_scale::prelude::*;
// Assume this is seconds, no kilo-seconds make sense.
let actual = Value::new_with(1234, Base::B1000, Constraint::UnitAndBelow);
let expected = Value {
mantissa: 1234f64,
prefix: Prefix::Unit,
base: Base::B1000,
};
assert_eq!(actual, expected);
Don't worry yet about the verbosity, the following parser helps with this.
Formatting values
In this example, the number x
is converted into a value and displayed
using the most appropriate SI prefix. The user chose to constrain the
prefix to be anything lower than Unit
(1) because kilo-seconds make
no sense.
use si_scale::format_value;
use si_scale::{value::Value, base::Base, prefix::Constraint};
let x = 1234.5678;
let v = Value::new_with(x, Base::B1000, Constraint::UnitAndBelow);
let unit = "s";
let actual = format!(
"result is {}{u}",
format_value!(v, "{:.5}", groupings: '_'),
u = unit
);
let expected = "result is 1_234.567_80 s";
assert_eq!(actual, expected);
Run code-coverage
Install the llvm-tools-preview component and grcov
rustup component add llvm-tools-preview
cargo install grcov
Install nightly
rustup toolchain install nightly
The following make invocation will switch to nigthly run the tests using
Cargo, and output coverage HTML report in ./coverage/
make coverage
The coverage report is located in ./coverage/index.html
License
Licensed under either of
at your option.
Contribution
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.