🇺🇦 UKRAINE IS BEING ATTACKED BY RUSSIAN ARMY. CIVILIANS ARE GETTING KILLED. RESIDENTIAL AREAS ARE GETTING BOMBED.
- Help Ukraine via:
- More info on war.ukraine.ua and MFA of Ukraine
Payload launcher written in Kotlin for Nintendo Switch.
Application doesn't require Root on your device.
Fusee and Hekate payloads bundled as default.
- Launch the application.
- Find a cable to connect your device to the Nintendo Switch. For proper work, this should be a cable that is designed for data transmission, not just for charging. It is advisable to use an A-to-C cable and USB OTG adapter.
- In the "Payloads" category, click the "+" button to select preloaded payload from your device's storage. Or simply transfer your payload to the Rekado folder in the device's memory. Or you can use the bundled payloads (Hekate/Fusee).
- Enter your Nintendo Switch into RCM mode in any convenient way. Your Nintendo Switch will power on by itself when plugged in, be sure to hold VOLUME +.
- Connect the device to the Nintendo Switch and allow permission for the USB access if necessary. Wait unit payloads chooser dialog will be opened and select which one you want to load.
- Wait for the payload to finish loading on your console.
You can get APK (installation file) from Releases form in this repository.
Nothing happens after connecting Nintendo Switch
In most cases, this problem occurs if your device doesn't support OTG connection or it could be just disabled by default (e.g. OnePlus devices). Try to check if your device supports it and check if it is enabled and try again.
Sending payload failed at offset
This problem is in most cases not related to the used device, but the cable or adapter. It occurs most often due to cables that are not designed to transfer large amounts of data. Try to use another cable or adapter.
SUBMITURB
This problem occurs on a device with old USB controllers installed in their devices (EHCI/USB 2.0). This is a device-only problem, that can be fixed by installing additional kernel patches, which is not recommended to do yourself. Only devices with xHCI (USB 3.0) controllers are supported now.
All localization files moved to Crowdin platform (which I am using for my other projects) and if you want to add/update/check any localization follow this link to start. I will decline all pull requests with your localizations and will accept only Crowdin versions, which I will manually add in new updates.
Does the application require Root?
Rekado doesn't require Root on your device.
Can it brick my device/console?
This should not happen when using the "correct" payloads. But I am not responsible for possible problems.
- DavidBuchanan314 for creating NXLoader.
- ealfonso93 for contributing in this project.
I have created and supporting this and other my apps in my free time, so if you would like to support me, check my "Buy Me A Coffee" page to support me and my projects.