check_hp_ilo4
nagios check for HP ILO4 service processor health
Requirements
perl, snmp
Setup
You will need a section similar to the following in the commands.cfg file on the nagios server:
# 'check_hp_ilo4' command definition
define command{
command_name check_hp_ilo4
command_line $USER1$/check_hp_ilo4 -H $HOSTADDRESS$ -C $ARG1$
}
You will need a section similar to the following in the services.cfg file on the nagios server:
# Check HP ILO4
# Requires SNMP enabled on ILO
# syntax is check_hp_ilo4!optional_snmp_community
define service {
use generic-service
hostgroup_name all_hp_ilo4
service_description HP ILO4
check_command check_hp_ilo4!optional_snmp_community
}
Output
You will see output similar to the following:
HP ILO4 OK - Ambient_Temperature:21C Power_Redundancy:ok Fan_Status:8/8ok Physical_Disks:3/3ok Logical_disks:1/1ok Processors:2/2ok Memory_Modules:24/24ok