Martin Dejmal's starred repositories
3dSolarNode
3dSolarNode
flipperzero-flippenheimer
Handy geiger counter add-on for your Flipper Zero
IC-705_Interface
ESP32 interface for IC-705
Sharp-Memory-LCD-Kernel-Driver
Linux Kernel Driver for Sharp Memory LCDs
Xtreme-Firmware
The Dom amongst the Flipper Zero Firmware. Give your Flipper the power and freedom it is really craving. Let it show you its true form. Dont delay, switch to the one and only true Master today!
Quansheng_UV-K5_Wiki
Quansheng UV-K5 Firmware
agc-mechanical-cad
Apollo Guidance Computer - Mechanical CAD models from the original NASA/MIT drawings
unitemp-flipperzero
Flipper Zero application for reading temperature, humidity and pressure sensors like a DHT11/22, DS18B20, BMP280, HTU21 and more
esphome-jbd-bms
ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
LoRa_APRS_iGate
LoRa APRS iGATE for ESP32 Based Board with Rx + Tx capabilities
Ultimate-Battery-Tester
The ultimate battery tester with ESR measurement and discharge graph. Based on an Arduino Nano and a 1602 LCD.
BatteryTesterAttiny
Battery Tester for 1.5V batteries using an Attiny85 and a small OLED display
jbd-bms-mqtt
Use an ESP8266 to send data from a JBD BMS (AP21S001) to a MQTT broker
EPEver2MQTT
ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT
ATC_MiThermometer
Custom firmware for the Xiaomi Thermometer LYWSD03MMC and Telink Flasher via USB to Serial converter
LoRa_APRS_Tracker
A LoRa based APRS tracker for ESP32 boards.
LoRa_APRS_iGate
This is a LoRa APRS iGate/Digi based on an ESP32