MaTouch ESP32-S3 Rotary IPS Display with Touch 2.1 ST7701
/*
Version: V1.0
Author: Vincent
Create Date: 2023/8/24
Note:
2023/8/29 V1.1 Change out factory test program
*/
Specs:
- Controller: ESP32-S3
- Wireless: WiFi& Bluetooth 5.0
- Touch Panel Driver: CST826
- USB: USB Native, Type-C
- Power Supply: USB Type-C 5.0V(4.0V~5.25V)
- Button: Flash button and reset button
- Arduino support: Yes
- MicroPython support: Yes
- Operation temperature: -40℃ to +85℃
Related library versions
- Use type-c use cable connect USB-TTL to PC.
- Select "ESP32-S3 DEV Module"
- Select PSRAM "OPI PSRAM"
"mf_Lvgl" library is modified from Lvgl library (version 8.3.2).
Please unzip "lib/mf_Lvgl.zip","TouchLib" and copy to arduino library directory.
Old factory test program. Test screen display and touch, as well as ring encoders and press switches.
Factory test program. Test screen display and touch, as well as ring encoders and press switches. After press screen, it will change different screen.
No SD card is required, files are stored in SPIFFS in Flash, and the display is switched by rotary encoder.
Need use arduino-esp32fs-plugin upload picture. And install JPEGDEC version 1.2.8
Control stepper motor rotation speed, rotation direction.