MaikStohn/UP3D Issues
Set Temperature
ClosedUnderstanding the protocol
Updated 2Up! Box printing at a 3-5 degree angle.
Updated 53Work on New UpBox+ ?
Updated 6Cetus ROM 6.14 support
Updated 12UP3DWifi
UpdatedUP CPU Chip
Updated 20UP! Mini 2 support
UpdatedNew updates
Updated 7Calculation of a for extruder
Closed 3UP3DTOOLS on mac
Closed 4Cetus3D support
Closed 4plus - freezes after 28k
Updated 3Document settings for gcode generation
Updated 18Layer Positioning Issue
Closed 7Rename tools to be less generic
Closed 2UPload stops at 30%
Closed 10Question: G-Code 'flavour'
Closed 4update ipk of upwifi
Closed 2Not quite compatible with UPBox
Closed 1Error while sending umc code file
Closed 14first test
Closed 10Error in transcode or upload?
Closed 4Flipped print
Closed 5