Maurice Smulders's repositories
digicert-example
DigiCert Example code
LibreVNA
100kHz to 6GHz 2 port USB based VNA
rpi-imager
Offline RPI-Imager
signal-backup
Archive your Signal conversations to immutable storage (project abandoned, but feel free to use as reference if it helps)
openwrt-packages
Community maintained packages for OpenWrt. Documentation for submitting pull requests is in CONTRIBUTING.md
openwrt
This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.
linux
Linux kernel source tree
pinetime-infinitime-time-synchronization
Sync the time on your PineTime using Chrome over Bluetooth LE
8821cu
Linux Driver for USB WiFi Adapters that are based on the RTL8811CU, RTL8821CU and RTL8731AU Chipsets
USB-WiFi
USB WiFi Adapter Information for Linux
linux-wifi-hotspot
Feature-rich wifi hotspot creator for Linux which provides both GUI and command-line interface. It is also able to create a hotspot using the same wifi card which is connected to an AP already ( Similar to Windows 10).
8821au
Linux Driver for USB WiFi Adapters that are based on the RTL8811AU and RTL8821AU Chipsets
8814au
Linux Driver for USB WiFi Adapters that are based on the RTL8814AU Chipset
8812au
Linux Driver for USB WiFi Adapters that are based on the RTL8812AU Chipset
88x2bu
Linux Driver for USB WiFi Adapters that are based on the RTL8812BU and RTL8822BU Chipsets
OctoPrint-PSUControl
Control ATX/AUX power supply
FlexApiDemo
This is a limited framework
makerboard
Utility and emulator for development boards
Z80-MBC2
The Z80-MBC2 is an easy to build Z80 SBC (Single Board Computer). It is the "evolution" of the Z80-MBC, with a SD as "disk emulator" and with a 128KB banked RAM for CP/M 3 (but it can run CP/M 2.2 and QP/M 2.71 too).
buildroot
Buildroot, making embedded Linux easy. Note that this is not the official repository, but only a mirror. The official Git repository is at http://git.buildroot.net/buildroot/. Do not open issues or file pull requests here.
OctoPrint-M73Progress
A plugin to update the built-in progress bar on your printer's LCD.
usbip-windows
USB/IP for Windows
OctoPrint-Cost
Cost-estimation plugin for OctoPrint
ser2sock
Serial to Socket Redirector