node-red-contrib-nibepi
Node-RED plugins for NibePi interface for connecting to Nibe F series heatpump
Link to downloadable image: http://anerdins.se/NibePi/nibepi_1.1_clean.rar
Download the NibePi clean image file. Burn it to a 16GB SD-card and load it to the Raspberry Pi with the RS485 transciever.
The image file contains a Raspbian setup, MQTT Broker (no auth), Node-RED, preinstalled NibePi nodes for Node-RED with a read-only filesystem (writemode is possible from Node-RED)
Please edit the wpa_supplicant.conf file on the boot partion with your country and wifi credentials.
The Node-RED interface will be available on http://IP_ADDRESS:1880 or http://nibepi:1880
If you already have Node-RED set up, install my Node-RED nodes with this command from inside the Node-RED folder.
npm install --save anerdins/node-red-contrib-nibepi#master
Example flow here:
[
{
"id": "c2626870.6a52c8",
"type": "tab",
"label": "Example",
"disabled": false,
"info": ""
},
{
"id": "c2a66540.4f6c28",
"type": "nibe-config",
"z": "",
"mqtt": true,
"mqtt_discovery": false,
"mqtt_topic": "nibe/modbus/",
"mqtt_host": "127.0.0.1",
"mqtt_port": "1883",
"mqtt_user": "",
"mqtt_pass": "",
"readonly": true,
"connection_series": "fSeries",
"connection": "serial",
"serial_port": "/dev/ttyAMA0",
"tcp_server": "",
"tcp_port": ""
},
{
"id": "df78f47a.a51968",
"type": "mqtt-broker",
"z": "",
"name": "NibePi",
"broker": "127.0.0.1",
"port": "1883",
"clientid": "",
"usetls": false,
"compatmode": true,
"keepalive": "60",
"cleansession": true,
"birthTopic": "",
"birthQos": "0",
"birthPayload": "",
"closeTopic": "",
"closeQos": "0",
"closePayload": "",
"willTopic": "",
"willQos": "0",
"willPayload": ""
},
{
"id": "8c65f770.eb8d08",
"type": "nibe-request",
"z": "c2626870.6a52c8",
"server": "c2a66540.4f6c28",
"name": "40004",
"x": 310,
"y": 700,
"wires": [
[
"1827f654.dda3da"
],
[
"562698f4.9ee208"
]
]
},
{
"id": "b25667f9.794ea8",
"type": "nibe-input",
"z": "c2626870.6a52c8",
"server": "c2a66540.4f6c28",
"name": "40004",
"add": false,
"x": 100,
"y": 420,
"wires": [
[
"bf0de12f.f51dc"
],
[
"626f648.4ede99c"
]
]
},
{
"id": "9a818749.c99058",
"type": "nibe-output",
"z": "c2626870.6a52c8",
"server": "c2a66540.4f6c28",
"name": "47260",
"x": 345,
"y": 847,
"wires": [
[
"dc6484bf.e07ab8"
]
]
},
{
"id": "bf0de12f.f51dc",
"type": "debug",
"z": "c2626870.6a52c8",
"name": "Get only updated values in msg.payload",
"active": false,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "true",
"targetType": "full",
"x": 392,
"y": 420,
"wires": []
},
{
"id": "626f648.4ede99c",
"type": "debug",
"z": "c2626870.6a52c8",
"name": "Always updates when messages comes msg.payload",
"active": false,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "true",
"targetType": "full",
"x": 432,
"y": 462,
"wires": []
},
{
"id": "37fbfd1e.6971c2",
"type": "inject",
"z": "c2626870.6a52c8",
"name": "",
"topic": "",
"payload": "Original message",
"payloadType": "str",
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"x": 123,
"y": 700,
"wires": [
[
"8c65f770.eb8d08"
]
]
},
{
"id": "1827f654.dda3da",
"type": "debug",
"z": "c2626870.6a52c8",
"name": "msg.40004 is updated with the payload msg.40004_raw contains all json info",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "true",
"targetType": "full",
"x": 738,
"y": 700,
"wires": []
},
{
"id": "562698f4.9ee208",
"type": "debug",
"z": "c2626870.6a52c8",
"name": "msg.payload is updated with the request.",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "true",
"targetType": "full",
"x": 630,
"y": 735,
"wires": []
},
{
"id": "61f75660.8a4878",
"type": "comment",
"z": "c2626870.6a52c8",
"name": "Input node, first output only updates when the value is changed, the second output always updates, msg.raw contains the whole JSON with more information",
"info": "",
"x": 570,
"y": 364,
"wires": []
},
{
"id": "b212730b.d53a3",
"type": "comment",
"z": "c2626870.6a52c8",
"name": "Request node, request a updated value from the heatpump, the first output will add the message to msg.40004 (example), the second output adds it to the msg.payload",
"info": "",
"x": 600,
"y": 644,
"wires": []
},
{
"id": "31a8d9c5.6981b6",
"type": "inject",
"z": "c2626870.6a52c8",
"name": "",
"topic": "",
"payload": "0",
"payloadType": "num",
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"x": 100,
"y": 847,
"wires": [
[
"9a818749.c99058"
]
]
},
{
"id": "dc6484bf.e07ab8",
"type": "debug",
"z": "c2626870.6a52c8",
"name": "Confirmation from the heatpump that the message has been ACKED and the new value is returned",
"active": false,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "true",
"targetType": "full",
"x": 824,
"y": 847,
"wires": []
},
{
"id": "41f4ab59.2f0d34",
"type": "comment",
"z": "c2626870.6a52c8",
"name": "Output node, sets the selected register to the value in msg.payload",
"info": "",
"x": 290,
"y": 791,
"wires": []
},
{
"id": "ee2894e7.83c318",
"type": "nibe-input",
"z": "c2626870.6a52c8",
"server": "c2a66540.4f6c28",
"name": "",
"add": false,
"x": 110,
"y": 553,
"wires": [
[
"4000c971.6d68c8"
],
[
"249a6ce6.a39d24"
]
]
},
{
"id": "167e9574.2f7b9b",
"type": "comment",
"z": "c2626870.6a52c8",
"name": "Unnamed node gets all the updates from every register that has been added or in the LOG.SET",
"info": "",
"x": 380,
"y": 504,
"wires": []
},
{
"id": "4000c971.6d68c8",
"type": "debug",
"z": "c2626870.6a52c8",
"name": "Only updated values",
"active": false,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "true",
"targetType": "full",
"x": 374,
"y": 546,
"wires": []
},
{
"id": "249a6ce6.a39d24",
"type": "debug",
"z": "c2626870.6a52c8",
"name": "Every value, the same or not",
"active": false,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "true",
"targetType": "full",
"x": 394,
"y": 588,
"wires": []
},
{
"id": "e2d6010c.b657b",
"type": "nibe-output",
"z": "c2626870.6a52c8",
"server": "c2a66540.4f6c28",
"name": "",
"x": 365,
"y": 959,
"wires": [
[
"db4d7e3a.27941"
]
]
},
{
"id": "db4d7e3a.27941",
"type": "debug",
"z": "c2626870.6a52c8",
"name": "Confirmation from the heatpump that the message has been ACKED and the new value is returned",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "true",
"targetType": "full",
"x": 838,
"y": 959,
"wires": []
},
{
"id": "8bd15965.08a3f8",
"type": "inject",
"z": "c2626870.6a52c8",
"name": "",
"topic": "47260",
"payload": "2",
"payloadType": "num",
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"x": 110,
"y": 959,
"wires": [
[
"e2d6010c.b657b"
]
]
},
{
"id": "210aa2e4.0c50fe",
"type": "comment",
"z": "c2626870.6a52c8",
"name": "No name in output node takes register from msg.topic, and the value from msg.payload",
"info": "",
"x": 350,
"y": 910,
"wires": []
},
{
"id": "c73554e.4583fa8",
"type": "exec",
"z": "c2626870.6a52c8",
"command": "sudo mount -o remount,ro /",
"addpay": false,
"append": "",
"useSpawn": "false",
"timer": "",
"oldrc": false,
"name": "Set READ-ONLY filesystem",
"x": 920,
"y": 220,
"wires": [
[],
[],
[]
]
},
{
"id": "fc6019a2.379148",
"type": "inject",
"z": "c2626870.6a52c8",
"name": "Start",
"topic": "",
"payload": "",
"payloadType": "date",
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"x": 710,
"y": 220,
"wires": [
[
"c73554e.4583fa8"
]
]
},
{
"id": "b4a28289.aeca2",
"type": "exec",
"z": "c2626870.6a52c8",
"command": "sudo mount -o remount,rw /",
"addpay": false,
"append": "",
"useSpawn": "false",
"timer": "",
"oldrc": false,
"name": "Set READ/WRITE filesystem",
"x": 920,
"y": 280,
"wires": [
[],
[],
[]
]
},
{
"id": "46a6b81d.816838",
"type": "inject",
"z": "c2626870.6a52c8",
"name": "Start",
"topic": "",
"payload": "",
"payloadType": "date",
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"x": 710,
"y": 280,
"wires": [
[
"b4a28289.aeca2"
]
]
},
{
"id": "5a2aae0a.fc23a",
"type": "comment",
"z": "c2626870.6a52c8",
"name": "Double click a NibePi node and add a server, the MQTT broker is running in the background, if you want NibePi to publish values to it, enable it. Set serialport etc.",
"info": "",
"x": 570,
"y": 80,
"wires": []
},
{
"id": "ca5fa578.ff4248",
"type": "comment",
"z": "c2626870.6a52c8",
"name": "The MQTT Broker is running at 127.0.0.1:1883 with no auth.",
"info": "",
"x": 260,
"y": 122,
"wires": []
},
{
"id": "c6bd5ead.c97e4",
"type": "comment",
"z": "c2626870.6a52c8",
"name": "In the input node, you can easily add registers by checking the box, NibePi will request them regulary, the more registers added, the longer it will take for each message.",
"info": "",
"x": 590,
"y": 164,
"wires": []
},
{
"id": "99fbe0b.f0e772",
"type": "inject",
"z": "c2626870.6a52c8",
"name": "",
"topic": "removeRegister",
"payload": "47260",
"payloadType": "num",
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"x": 140,
"y": 256,
"wires": [
[
"df31bf9e.12a3f"
]
]
},
{
"id": "1856e3af.d0724c",
"type": "inject",
"z": "c2626870.6a52c8",
"name": "",
"topic": "addRegister",
"payload": "47260",
"payloadType": "num",
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"x": 130,
"y": 298,
"wires": [
[
"df31bf9e.12a3f"
]
]
},
{
"id": "df31bf9e.12a3f",
"type": "nibe-output",
"z": "c2626870.6a52c8",
"server": "c2a66540.4f6c28",
"name": "",
"x": 376,
"y": 277,
"wires": [
[]
]
},
{
"id": "2cb52bd8.777394",
"type": "comment",
"z": "c2626870.6a52c8",
"name": "Remove or add register with the output node, set the topic as in the example.",
"info": "",
"x": 310,
"y": 214,
"wires": []
},
{
"id": "8e3d51e6.e5956",
"type": "debug",
"z": "c2626870.6a52c8",
"name": "MQTT ALL",
"active": false,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "payload",
"targetType": "msg",
"x": 390,
"y": 1060,
"wires": []
},
{
"id": "4265c026.fe34b",
"type": "mqtt in",
"z": "c2626870.6a52c8",
"name": "MQTT IN : nibe/modbus/#",
"topic": "nibe/modbus/#",
"qos": "2",
"datatype": "auto",
"broker": "df78f47a.a51968",
"x": 164,
"y": 1060,
"wires": [
[
"8e3d51e6.e5956"
]
]
},
{
"id": "986b14a8.cf5b88",
"type": "comment",
"z": "c2626870.6a52c8",
"name": "If MQTT is activated, messages will come here",
"info": "",
"x": 224,
"y": 1011,
"wires": []
},
{
"id": "9cb59e8d.d998a",
"type": "mqtt out",
"z": "c2626870.6a52c8",
"name": "MQTT Out",
"topic": "",
"qos": "",
"retain": "false",
"broker": "df78f47a.a51968",
"x": 460,
"y": 1305,
"wires": []
},
{
"id": "4efe2494.f25bcc",
"type": "inject",
"z": "c2626870.6a52c8",
"name": "",
"topic": "nibe/modbus/47260/set",
"payload": "2",
"payloadType": "num",
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"x": 164,
"y": 1263,
"wires": [
[
"9cb59e8d.d998a"
]
]
},
{
"id": "d0917bf.7880088",
"type": "inject",
"z": "c2626870.6a52c8",
"name": "",
"topic": "nibe/modbus/47260/set",
"payload": "0",
"payloadType": "num",
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"x": 164,
"y": 1312,
"wires": [
[
"9cb59e8d.d998a"
]
]
},
{
"id": "2489accf.d8f284",
"type": "inject",
"z": "c2626870.6a52c8",
"name": "",
"topic": "nibe/modbus/47260/get",
"payload": "true",
"payloadType": "bool",
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"x": 174,
"y": 1361,
"wires": [
[
"9cb59e8d.d998a"
]
]
},
{
"id": "5eca8eef.35781",
"type": "mqtt in",
"z": "c2626870.6a52c8",
"name": "MQTT IN : nibe/modbus/47260",
"topic": "nibe/modbus/47260",
"qos": "2",
"datatype": "auto",
"broker": "df78f47a.a51968",
"x": 184,
"y": 1109,
"wires": [
[
"d7003a71.6ac5a8"
]
]
},
{
"id": "70b75416.77deac",
"type": "mqtt in",
"z": "c2626870.6a52c8",
"name": "MQTT IN : nibe/modbus/47260/raw",
"topic": "nibe/modbus/47260/raw",
"qos": "2",
"datatype": "auto",
"broker": "df78f47a.a51968",
"x": 194,
"y": 1158,
"wires": [
[
"e86dfd41.0bc2d"
]
]
},
{
"id": "9f17fb63.355578",
"type": "mqtt in",
"z": "c2626870.6a52c8",
"name": "MQTT IN : nibe/modbus/47260/json",
"topic": "nibe/modbus/47260/json",
"qos": "2",
"datatype": "auto",
"broker": "df78f47a.a51968",
"x": 194,
"y": 1207,
"wires": [
[
"53dab2da.1afa0c"
]
]
},
{
"id": "d7003a71.6ac5a8",
"type": "debug",
"z": "c2626870.6a52c8",
"name": "MQTT",
"active": false,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "payload",
"targetType": "msg",
"x": 405,
"y": 1109,
"wires": []
},
{
"id": "e86dfd41.0bc2d",
"type": "debug",
"z": "c2626870.6a52c8",
"name": "MQTT RAW",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "payload",
"targetType": "msg",
"x": 432,
"y": 1158,
"wires": []
},
{
"id": "53dab2da.1afa0c",
"type": "debug",
"z": "c2626870.6a52c8",
"name": "MQTT JSON",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "payload",
"targetType": "msg",
"x": 432,
"y": 1207,
"wires": []
},
{
"id": "6540a3be.8a232c",
"type": "inject",
"z": "c2626870.6a52c8",
"name": "",
"topic": "nibe/modbus/47260/add",
"payload": "true",
"payloadType": "bool",
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"x": 174,
"y": 1410,
"wires": [
[
"9cb59e8d.d998a"
]
]
},
{
"id": "c82d49fd.a65a48",
"type": "inject",
"z": "c2626870.6a52c8",
"name": "",
"topic": "nibe/modbus/47260/remove",
"payload": "true",
"payloadType": "bool",
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"x": 184,
"y": 1459,
"wires": [
[
"9cb59e8d.d998a"
]
]
},
{
"id": "998dbdec.aa7f6",
"type": "exec",
"z": "c2626870.6a52c8",
"command": "sudo reboot",
"addpay": false,
"append": "",
"useSpawn": "false",
"timer": "",
"oldrc": false,
"name": "Reboot NibePi hardware",
"x": 990,
"y": 440,
"wires": [
[],
[],
[]
]
},
{
"id": "82316f38.199e2",
"type": "inject",
"z": "c2626870.6a52c8",
"name": "Start",
"topic": "",
"payload": "",
"payloadType": "date",
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"x": 790,
"y": 440,
"wires": [
[
"998dbdec.aa7f6"
]
]
},
{
"id": "a434e28.575d82",
"type": "inject",
"z": "c2626870.6a52c8",
"name": "Start",
"topic": "",
"payload": "",
"payloadType": "date",
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"x": 790,
"y": 500,
"wires": [
[
"a69d43bb.f7373"
]
]
},
{
"id": "a69d43bb.f7373",
"type": "exec",
"z": "c2626870.6a52c8",
"command": "sudo shutdown now",
"addpay": false,
"append": "",
"useSpawn": "false",
"timer": "",
"oldrc": false,
"name": "Shutdown NibePi hardware",
"x": 1000,
"y": 500,
"wires": [
[],
[],
[]
]
},
{
"id": "88732c48.ab2f5",
"type": "comment",
"z": "c2626870.6a52c8",
"name": "NibePi will automatically discover the heatpump and load the registers when the right serialport is selected",
"info": "",
"x": 400,
"y": 40,
"wires": []
}
]