MCUdude / MightyCore

Arduino hardware package for ATmega1284, ATmega644, ATmega324, ATmega324PB, ATmega164, ATmega32, ATmega16 and ATmega8535

MCUdude/MightyCore Issues

urboot copy_flash_pages
Closed 19 days ago8
'SDA1' undeclared
Closed 19 days ago1
Issue with uploading through Serial0 on custom PCB
Closed 3 months ago3
Atmega16A Serial can not use, until 1 sec delay.
Closed 3 months ago6
'TIMSK3' was not declared in this scope
Closed 4 months ago5
Adding Profiles for 20 and 16 Mhz External clock (not crystal) - atmega32
Closed 5 months ago1
3.0.1 issue "USBAPI.h uses delay.h -- which has an error when compiling"
Closed 5 months ago1
Error while burning bootloader (while using v3.0)
Closed 6 months ago1
LED flashing on A, C, D, Atmega16
Closed 6 months ago1
Keep failure to flash the optiboot loader to the ATMEGA128P
Closed 6 months ago4
Arduino IDE option for optiboot with version 3.0.0
Closed 6 months ago12
Migrating from Optiboot to Urboot
Closed 8 months ago14
arduino-cli compile with --output-dir flag set fails to build *.with_bootloader.hex file.
Closed 8 months ago9
ATmega32 millis is not right using the 8 MHz internal oscillator?
Closed 10 months ago2
No variants for ATmega32?
Closed 10 months ago2
ATmega32 Serial doesn't work
Closed 10 months ago1
ATmega32A reset after upload.
Closed a year ago6
Perhaps some setting of the delay/clock functions need to be revised.
Closed a year ago2
Atmega324pb: OC1b vs XCK1, OC2A vs XCK2
Closed a year ago6
Error compiling for board ATmega1284
Closed a year ago3
ATMEGA324PA bootloader upload error
Closed a year ago2
Custom baud?
Closed a year ago2
ATmega1284 clock source fuses are not set
Closed a year ago9
Feature request: add linuxgpio programmer to programmer options in arduino IDE
Updated a year ago7
Proteus Simulation Clock
Closed 2 years ago3
atmega32-16u Bootloader works once then fail after sketch flash
Closed a year ago8
Can't update boards.txt
Closed a year ago3
I cant compile code using mighty core even tho the code compilers using normal arduino , error exec: "cmd": executable file not found in %PATH%
Closed a year ago7
10MHz external clock support
Updated a year ago1
Atmega32-16u get error use encoder library
Closed a year ago2
How to Solve avrdude.conf errors when programming Atmega324PB with USBasp and MightyCore on Arduino 1.8.19
Closed a year ago4
Question: Enable floating points in platform.txt
Closed a year ago1
Question about PCINT on 644A
Closed a year ago2
compile error...
Closed a year ago2
Problems with external strong (4-pin) oscillator
Closed a year ago2
Remote Control using Atmega + Lora Chip
Closed 2 years ago2
Timer0 stop working after wakeup from power_down sleep
Closed 2 years ago5
Power_down mode consume 0.2ma
Closed 2 years ago3
Upload once successfully but can't after that
Closed 2 years ago3
Serial print output is scrambled
Closed 2 years ago4
Error to compile ATMega32 board
Closed 2 years ago1
how to use another programmer?
Closed 2 years ago1
Menu-option for turning off JTAG interface
Closed 2 years ago3
millis() with 11.0592 X-tal
Closed 2 years ago1
Error Compiling Attmega664a "No SPI Pins Defined"
Closed 2 years ago1
compile error for Atmega1284 and Atmega32
Closed 2 years ago3
ATmega 644A Compiling Error with Fastled
Closed 2 years ago
Sleep Mode - Wake up Interrupt Enable
Closed 2 years ago1
Does this work on Atmega1284P-AU version ?
Closed 2 years ago1
OSCCAL byte atmega16
Closed 2 years ago1