LouiseMcMahon / broadlink-s3-hub-app-daemon

Support broadlink s3 hub in AppDaemon

Installation

Use HACS or download the broadlink directory from inside the apps directory here to your local apps directory, then add the configuration to enable the broadlink_s3_hub module.

App configuration

config/appdaemon/apps/apps.yaml

one_gang_switch:
  module: broadlink_s3_hub
  class: BroadlinkS3Hub
  hub_ip: "192.168.1.209"
  did: "00000000000000000000a043b0d059ac"
  scan_interval: 0.5
  friendly_names:
    - Gang 1 name
  entity_ids:
    - light.gang_1

two_gang_switch:
  module: broadlink_s3_hub
  class: BroadlinkS3Hub
  hub_ip: "192.168.1.209"
  did: "00000000000000000000a043b0d059ac"
  scan_interval: 0.5
  friendly_names:
    - Gang 1 name
    - Gang 2 name
  entity_ids:
    - light.gang_1
    - light.gang_2

three_gang_switch:
  module: broadlink_s3_hub
  class: BroadlinkS3Hub
  hub_ip: "192.168.1.209"
  did: "00000000000000000000a043b0d059ac"
  scan_interval: 0.5
  friendly_names:
    - Gang 1 name
    - Gang 2 name
    - Gang 3 name
  entity_ids:
    - light.gang_1
    - light.gang_2
    - light.gang_3

Note: You can add multiple switches by duplicate the same config with different name

key	optional	type	description
module	False	string	The module name of the app.
class	False	string	The name of the Class.
hub_ip	False	string	The broadlink hub ip address
did	False	string	The device id that you want to control, check this page to know how to get it
scan_interval	False	int	Platforms that require polling will be polled in an interval specified by the main component. For example a light will check every 30 seconds for a changed state. It is possible to overwrite this scan interval for any platform that is being polled by specifying a scan_interval configuration key. In the example below we set up the your_lights platform but tell Home Assistant to poll the devices every 10 seconds instead of the default 30 seconds.
friendly_names	False	list of string	The entity names that will be displayed in the frontend
entity_ids	False	list of string	The entity ids that you will use to controll the entity in automations, the items in this array should same as the count of gangs in your switch if it's a switch

Compatibility

This app should work with any sub device that you can add to s3 hub. That said, it has been tested and is working with the following devices:

• BroadLink LC1-1 Gang Light Switch
• BroadLink TC3-1 Gang Light Switch