Spring boot starter for gRPC framework.

Table of Contents

1. Features
2. Setup
3. Usage
4. Show case
5. Spring Security Integration
6. Consul Integration
7. Eureka Integration
- 7.1. gRPC Server Project
- 7.2. gRPC Client Project
8. License

Best viewed with

1. Features

Auto-configures and runs the embedded gRPC server with @GRpcService-enabled beans as part of spring-boot application.

Important

Starting from release 4.0.0 the starter is compiled and tested against Spring Boot 2.3.X only,
1.5.X Spring boot version support is dropped to allow tight Spring Boot Security framework integration.

2. Setup

repositories {
    mavenCentral()
   //maven { url "https://oss.sonatype.org/content/repositories/snapshots" } //for snashot builds

}
dependencies {
    compile 'io.github.lognet:grpc-spring-boot-starter:4.2.2'
}

If you are using Spring Boot Dependency Management plugin, it might pull not the same version as the version this started was compiled against, causing binary incompatibility issue.
In this case you’ll need to forcibly and implicitly set the grpc version to use (see version matrix here ):

configurations.all {
 resolutionStrategy.eachDependency { details ->
    if ("io.grpc".equalsIgnoreCase(details.requested.group)) {
        details.useVersion "1.33.0"
        }
    }
}

Important

Starting from release 3.0.0 the artifacts are published to maven central. Pay attention that group has changed from org.lognet to io.github.lognet.

Note	The release notes with compatibility matrix can be found here

3. Usage

Start by generating stub and server interface(s) from your .proto file(s).
Annotate your server interface implementation(s) with @org.lognet.springboot.grpc.GRpcService
Optionally configure the server port in your application.yml/properties. Default port is 6565.

 grpc:
    port: 6565

Note	A random port can be defined by setting the port to `0`. The actual port being used can then be retrieved by using `@LocalRunningGrpcPort` annotation on `int` field which will inject the running port (explicitly configured or randomly selected)

Optionally enable server reflection (see https://github.com/grpc/grpc-java/blob/master/documentation/server-reflection-tutorial.md)

 grpc:
    enableReflection: true

Optionally set the number of seconds to wait for preexisting calls to finish during graceful server shutdown. New calls will be rejected during this time. A negative value is equivalent to an infinite grace period. Default value is 0 (means don’t wait).

 grpc:
    shutdownGrace: 30

Netty-specific server properties can be specified under grpc.netty-server prefix.
By configuring one of the grpc.netty-server.xxxx values you are implicitly setting transport to be Netty-based.

grpc:
  netty-server:
    keep-alive-time: 30s (1)
    max-inbound-message-size: 10MB (2)
    primary-listen-address: 10.10.15.23:0 (3)
    additional-listen-addresses:
      - 192.168.0.100:6767 (4)

Duration type properties can be configured with string value format described here.
DataSize type properties can be configured with string value described here
Exposed on external network IP with custom port.
SocketAddress type properties string value format:
- host:port (if port value is less than 1, uses random value)
- host: (uses default grpc port, 6565 )
Exposed on internal network IP as well with predefined port 6767.

The starter supports also the in-process server, which should be used for testing purposes :

 grpc:
    enabled: false (1)
    inProcessServerName: myTestServer (2)

Disables the default server (NettyServer).
Enables the in-process server.

Note	If you enable both the `NettyServer` and `in-process` server, they will both share the same instance of `HealthStatusManager` and `GRpcServerBuilderConfigurer` (see Custom gRPC Server Configuration).

4. Show case

In the grpc-spring-boot-starter-demo project you can find fully functional examples with integration tests.

4.1. Service implementation

The service definition from .proto file looks like this :

service Greeter {
    rpc SayHello ( HelloRequest) returns (  HelloReply) {}
}

Note the generated io.grpc.examples.GreeterGrpc.GreeterImplBase class that extends io.grpc.BindableService.(The generated classes were intentionally committed for demo purposes).

All you need to do is to annotate your service implementation with @org.lognet.springboot.grpc.GRpcService

    @GRpcService
    public static class GreeterService extends  GreeterGrpc.GreeterImplBase{
        @Override
        public void sayHello(GreeterOuterClass.HelloRequest request, StreamObserver<GreeterOuterClass.HelloReply> responseObserver) {
            final GreeterOuterClass.HelloReply.Builder replyBuilder = GreeterOuterClass.HelloReply.newBuilder().setMessage("Hello " + request.getName());
            responseObserver.onNext(replyBuilder.build());
            responseObserver.onCompleted();
        }
    }

4.2. Interceptors support

The starter supports the registration of two kinds of interceptors: Global and Per Service.
In both cases the interceptor has to implement io.grpc.ServerInterceptor interface.

Per service

@GRpcService(interceptors = { LogInterceptor.class })
public  class GreeterService extends  GreeterGrpc.GreeterImplBase{
    // ommited
}

LogInterceptor will be instantiated via spring factory if there is bean of type LogInterceptor, or via no-args constructor otherwise.

Global

@GRpcGlobalInterceptor
public  class MyInterceptor implements ServerInterceptor{
    // ommited
}

The annotation on java config factory method is also supported :

 @Configuration
 public class MyConfig{
     @Bean
     @GRpcGlobalInterceptor
     public  ServerInterceptor globalInterceptor(){
         return new ServerInterceptor(){
             @Override
             public <ReqT, RespT> ServerCall.Listener<ReqT> interceptCall(ServerCall<ReqT, RespT> call, Metadata headers, ServerCallHandler<ReqT, RespT> next) {
                // your logic here
                 return next.startCall(call, headers);
             }
         };
     }
 }

Global interceptors can be ordered using Spring’s @Ordered or @Priority annotations. Following Spring’s ordering semantics, lower order values have higher priority and will be executed first in the interceptor chain.

@GRpcGlobalInterceptor
@Order(10)
public  class A implements ServerInterceptor{
    // will be called before B
}

@GRpcGlobalInterceptor
@Order(20)
public  class B implements ServerInterceptor{
    // will be called after A
}

The particular service also has the opportunity to disable the global interceptors :

@GRpcService(applyGlobalInterceptors = false)
public  class GreeterService extends  GreeterGrpc.GreeterImplBase{
    // ommited
}

4.3. Spring security support

The starter provides built-in support for authenticating and authorizing users leveraging integration with Spring Security framework.
Please refer to the sections on Spring Security Integration for details on supported authentication providers and configuration options.

4.4. Transport Security (TLS)

The transport security can be configured using root certificate together with its private key path:

 grpc:
    security:
      cert-chain: classpath:cert/server-cert.pem
      private-key: file:../grpc-spring-boot-starter-demo/src/test/resources/cert/server-key.pem

The value of both properties is in form supported by ResourceEditor.

The client side should be configured accordingly :

((NettyChannelBuilder)channelBuilder)
 .useTransportSecurity()
 .sslContext(GrpcSslContexts.forClient().trustManager(certChain).build());

This starter will pull the io.netty:netty-tcnative-boringssl-static dependency by default to support SSL.
If you need another SSL/TLS support, please exclude this dependency and follow Security Guide.

Note	If the more detailed tuning is needed for security setup, please use custom configurer described in Custom gRPC Server Configuration

4.5. Custom gRPC Server Configuration

To intercept the io.grpc.ServerBuilder instance used to build the io.grpc.Server, you can add bean that inherits from org.lognet.springboot.grpc.GRpcServerBuilderConfigurer to your context and override the configure method.
By the time of invocation of configure method, all discovered services, including theirs interceptors, had been added to the passed builder.
In your implementation of configure method, you can add your custom configuration:

@Component
public class MyGRpcServerBuilderConfigurer extends GRpcServerBuilderConfigurer{
        @Override
        public void configure(ServerBuilder<?> serverBuilder){
            serverBuilder
                .executor(YOUR EXECUTOR INSTANCE)
                .compressorRegistry(YOUR COMPRESSION REGISTRY)
                .decompressorRegistry(YOUR DECOMPRESSION REGISTRY)
                .useTransportSecurity(YOUR TRANSPORT SECURITY SETTINGS);
            ((NettyServerBuilder)serverBuilder)// cast to NettyServerBuilder (which is the default server) for further customization
                    .sslContext(GrpcSslContexts  // security fine tuning
                                    .forServer(...)
                                    .trustManager(...)
                                    .build())
                    .maxConnectionAge(...)
                    .maxConnectionAgeGrace(...);

        }
    };
}

Note	If you enable both `NettyServer` and `in-process` servers, the `configure` method will be invoked on the same instance of configurer. If you need to differentiate between the passed `serverBuilder` s, you can check the type. This is the current limitation.

5. Spring Security Integration

5.1. Setup

Table 1. Dependencies to implement authentiction scheme (to be added to server-side project)

Scheme	Dependencies
Basic	`org.springframework.security:spring-security-config`
Bearer	`org.springframework.security:spring-security-config` `org.springframework.security:spring-security-oauth2-jose` `org.springframework.security:spring-security-oauth2-resource-server`
Custom	`org.springframework.security:spring-security-config` `your.custom.lib`

5.2. Server side configuration

GRPC security configuration follows the same principals and APIs as Spring WEB security configuration.

5.2.1. Default

Defining bean with type GrpcSecurityConfigurerAdapter annotated with @EnableGrpcSecurity is sufficient to secure you GRPC services and/or methods :

    @EnableGrpcSecurity
    public class GrpcSecurityConfiguration extends GrpcSecurityConfigurerAdapter {

    }

This default configuration secures GRPC methods/services annotated with org.springframework.security.access.annotation.@Secured annotation.
Leaving value of the annotation empty (@Secured({})) means : authenticate only, no authorization will be performed.
If JwtDecoder bean exists in your context, it will also register JwtAuthenticationProvider to handle the validation of authentication claim.

5.2.2. Custom

Various configuration examples and test scenarios are here.

    @EnableGrpcSecurity
    public class GrpcSecurityConfiguration extends GrpcSecurityConfigurerAdapter {
        @Autowired
        private JwtDecoder jwtDecoder;

        @Override
        public void configure(GrpcSecurity builder) throws Exception {

            builder.authorizeRequests()(1)
                    .methods(GreeterGrpc.getSayHelloMethod()).hasAnyAuthority("SCOPE_profile")(2)
            .and()
                    .authenticationProvider(JwtAuthProviderFactory.withAuthorities(jwtDecoder));(3)
        }
    }

Get hold of authorization configuration object
MethodDefinition of sayHello method is allowed for authenticated users with SCOPE_profile authority.
Use JwtAuthenticationProvider to validate user claim (BEARER token) against resource server configured with spring.security.oauth2.resourceserver.jwt.issuer-uri property.

5.2.3. DIY

One is possible to plug in your own bespoke authentication provider by implementing AuthenticationSchemeSelector interface.

@EnableGrpcSecurity
    public class GrpcSecurityConfiguration extends GrpcSecurityConfigurerAdapter {
    @Override
        public void configure(GrpcSecurity builder) throws Exception {
        builder.authorizeRequests()
                    .anyMethod().authenticated()(1)
                    .and()
                    .authenticationSchemeSelector(new AuthenticationSchemeSelector() { (2)
                            @Override
                            public Optional<Authentication> getAuthScheme(CharSequence authorization) {
                                return new MyAuthenticationObject(); (3)
                            }
                        })
                    .authenticationProvider(new AuthenticationProvider() { (4)
                        @Override
                        public Authentication authenticate(Authentication authentication) throws AuthenticationException {
                            MyAuthenticationObject myAuth= (MyAuthenticationObject)authentication;
                            //validate myAuth
                            return MyValidatedAuthenticationObject(withAuthorities);(5)
                        }

                        @Override
                        public boolean supports(Class<?> authentication) {
                            return MyAuthenticationObject.class.isInstance(authentication);
                        }
                    });
 }
 }

Secure all services methods.
Register your own AuthenticationSchemeSelector.
Based on provided authorization header - return Authentication object as a claim (not authenticated yet)
Register your own AuthenticationProvider that supports validation of MyAuthenticationObject
Validate provided authentication and return validated and authenticated Authentication object

Client side configuration support section explains how to pass custom authorization scheme and claim from GRPC client.

5.3. Obtaining Authentication details

To obtain Authentication object in the implementation of secured method, please use below snippet

final Authentication auth = GrpcSecurity.AUTHENTICATION_CONTEXT_KEY.get();

5.4. Client side configuration support

By adding io.github.lognet:grpc-client-spring-boot-starter dependency to your java grpc client application you can easily configure per-channel or per-call credentials :

Per-channel :

class MyClient{
    public void doWork(){
        final AuthClientInterceptor clientInterceptor = new AuthClientInterceptor((1)
                AuthHeader.builder()
                    .bearer()
                    .tokenSupplier(this::generateToken)(3)
        );

        Channel authenticatedChannel = ClientInterceptors.intercept(
                ManagedChannelBuilder.forAddress("host", 6565), clientInterceptor (2)
        );
        // use authenticatedChannel to invoke GRPC service
    }

     private ByteBuffer generateToken(){ (3)
         // generate bearer token against your resource server
     }
 }

Create client interceptor
Intercept channel
Provide token generator function (Please refer to for example.)
- Per-call :

class MyClient{
    public void doWork(){
        AuthCallCredentials callCredentials = new AuthCallCredentials( (1)
                AuthHeader.builder().basic("user","pwd".getBytes())
        );

        final SecuredGreeterGrpc.SecuredGreeterBlockingStub securedFutureStub = SecuredGreeterGrpc.newBlockingStub(ManagedChannelBuilder.forAddress("host", 6565));(2)

        final String reply = securedFutureStub
                .withCallCredentials(callCredentials)(3)
                .sayAuthHello(Empty.getDefaultInstance()).getMessage();

    }
 }

Create call credentials with basic scheme
Create service stub
Attach call credentials to the call

AuthHeader could also be built with bespoke authorization scheme :

 AuthHeader
   .builder()
   .authScheme("myCustomAuthScheme")
   .tokenSupplier(()->generateMyCustomToken())

6. Consul Integration

Starting from version 3.3.0, the starter will auto-register the running grpc server in Consul registry if org.springframework.cloud:spring-cloud-starter-consul-discovery is in classpath and spring.cloud.service-registry.auto-registration.enabled is NOT set to false.

The registered service name will be prefixed with grpc- ,i.e. grpc-${spring.application.name} to not interfere with standard registered web-service name if you choose to run both embedded Grpc and Web servers.

Setting spring.cloud.consul.discovery.register-health-check to true will register GRPC health check service in Consul.

Tags could be set by defining spring.cloud.consul.discovery.tags property.

You can find the test that demonstrates the feature here.

7. Eureka Integration

When building production-ready services, the advise is to have separate project for your service(s) gRPC API that holds only proto-generated classes both for server and client side usage.
You will then add this project as compile dependency to your gRPC client and gRPC server projects.

To integrate Eureka simply follow the great guide from Spring.

Below are the essential parts of configurations for both server and client projects.

7.1. gRPC Server Project

Add eureka starter as dependency of your server project together with generated classes from proto files:

build.gradle

 dependencies {
     compile('org.springframework.cloud:spring-cloud-starter-eureka')
     compile project(":yourProject-api")
 }

Configure gRPC server to register itself with Eureka.

bootstrap.yaml

spring:
    application:
        name: my-service-name (1)

Eureka’s ServiceId by default is the spring application name, provide it before the service registers itself with Eureka.

application.yaml

grpc:
    port: 6565 (1)
eureka:
    instance:
        nonSecurePort: ${grpc.port} (2)
    client:
        serviceUrl:
            defaultZone: http://${eureka.host:localhost}:${eureka.port:8761}/eureka/ (3)

Specify the port number the gRPC is listening on.
Register the eureka service port to be the same as grpc.port so client will know where to send the requests to.
Specify the registry URL, so the service will register itself with.
- Expose the gRPC service as part of Spring Boot Application.

EurekaGrpcServiceApp.java

 @SpringBootApplication
 @EnableEurekaClient
 public class EurekaGrpcServiceApp {

     @GRpcService
     public static class GreeterService extends GreeterGrpc.GreeterImplBase {
         @Override
         public void sayHello(GreeterOuterClass.HelloRequest request, StreamObserver<GreeterOuterClass.HelloReply> responseObserver) {

         }
     }

     public static void main(String[] args) {
         SpringApplication.run(DemoApp.class,args);
     }
 }

7.2. gRPC Client Project

Add eureka starter as dependency of your client project together with generated classes from proto files: