List of Tamiya toys I already own
Racing Mini 4WD Series no.89
Item No: 18089
Oink Oink!
This is a Mini 4WD model assembly kit which creates a delightfully cute car called the Pig Racer. It comes with a pre-assembled and painted Pig Racer figure to attach with the included double-sided tape. A piggy-esque shad of pink is used on the open top Super Astute body, while stickers feature a host of logos, patterns and more.
Specifications
★ Length: 150mm
★ Width: 97mm
★ Height: 49mm
★ Easy snap-together assembly
Racing Mini 4WD Series no.100
Item No: 18100
Futuristic form
This assembly kit creates a brand new Mini 4WD model - the Eleglitter - designed by Kota Nezu who has produced the Astralster and Raikiri. Its eye-catching, wide body with a low center of gravity is inspired by futuristic open-top formula racers. The front and rear fenders are removable if you want to lighten the car, and a driver figure is also included. This model is based on the lightweight and compact VZ chassis and is suited to competing in Mini 4WD races. The small diameter low-profile wheels are 12-spoke and feature detachable aero discs to change the model's mood, and the color scheme of light blue and gray emphasizes the futuristic image. This cutting-edge design with its distinctive silhouette will raise excitement levels at Mini 4WD races.
Specifications
★ Length: 158mm
★ Width: 98mm
★ Height: 40mm
★ Includes motor
★ Easy snap-together assembly
Mini 4WD PRO Series no.31
Item No: 18631
Tokichi's Aerodynamic Machine
This Mini 4WD assembly kit is one you will love racing. The centrally located double shaft motor effectively transmits power to all four wheels for optimum performance. The "One-Touch" three piece chassis requires no glue and is a breeze to assemble. You will enjoy the fast speed of this machine and its wide choice of settings. The glamorous form of Tokichi Mikune's Spin-Axe Mk.II, including the extended body side and edged canopy, have been reproduced on the excellent MS chassis. An N-02 nose unit and yellow fluorescent wheels with small diameter tires are also included in the kit.
Specifications
★ Length: 152mm
★ Width: 92mm
★ Double Shaft Motor Included
★ Snap-on easy assembly
Mini 4WD PRO Series no.47
Item No: 18647
A Powerhouse
Get ready to race! This handy set combines the popular Blast Arrow Mini 4WD car kit with race spec option parts and basic tools. Fitting the option parts in the set turns the Blast Arrow into a swift racer suited to tracks that are loaded with corners. Included are a Torque-Tuned 2 motor, super hard tires (black), brake set, front under guard, mass dampers and FRP plates for the front and rear of your car. With relatively few spacers and screws, assembly is kept simple. The Blast Arrow body is molded in white and paired with the MA chassis in black. Comes with a 3.7:1 high speed gear set.
Specifications
★ Length: 155mm
★ Width: 104mm
★ Height: 41mm
★ Includes double-shaft motor
★ Easy snap-together assembly
Fully-Cowled Mini 4WD Series No.38
Item No: 19438
Sting when you're Winning
This is a premium version of the Ray Stinger, a machine which appeared in the Japanese cartoon "Let's and Go!"as the car of one of the heroes' rivals, Rei Hijikata. The body of the racer has a stylized front cowl dubbed the "stinger cowl", plus other exciting features such as body side ducts and jet aero duct on the rear cowl. The silver scheme is accented perfectly by metallic stickers inspired by the design seen in the original cartoon.
Specifications
★ Length: 150mm
★ Width: 97mm
★ Includes motor
★ Snap-together easy assembly
Fully-Cowled Mini 4WD Series No.47
Item No: 19447
Linking the Classic and the Modern
This plastic Mini 4WD model assembly kit creates the Beak Stinger G car which appears as the hero's rival machine in the popular Japanese comic "Let's & Go!! Return Racers!!". It is a fascinating fusion of inspiration from three classic 1990s Mini 4WD racers - the Brocken Gigant, Ray Stinger and Beak Spider. A silver ABS resin body comes with metallic stickers for decoration.
Specifications
★ Length: 155mm
★ Width: 97mm
★ Height: 44mm
★ Includes motor
★ Easy snap-together assembly
Fully-Cowled Mini 4WD Series No.52
Item No: 19452
A Premium Racer
This Mini 4WD model assembly kit creates a Premium version of the Brocken Gigant, which was driven by Kondo Gen in the Japanese Mini 4WD cartoon "Let's & Go!!". With unique fenders that sandwich rather than cover the wheels, and pipe frame sideguards, it has a truly unique look. The front cowl is a separate, removable component. Stickers are included in the kit to recreate headlights and other design motifs.
Specifications
★ Length: 156mm
★ Width: 97mm
★ Height: 38mm
★ Includes motor
★ Easy snap-together assembly
Grade-Up Parts Series no.318
Item No: 15318
★ This is a high rev motor for super top speed, perfect for use on high-speed courses with long straights.
★ Features a stylish gray end bell and durable carbon brushes.
★ Input voltage: 2.4-3.0V
★ RPM: 20,700-27,200
★ Current consumption: 2.8-3.8A
Grade-Up Parts Series no.484
Item No: 15484
★ Input voltage: 2.4-3.0V
★ Torque at recommended load: 1.6-2.0mN-m
★ RPM: 12,300-14,700
★ Current consumption: 1.7-2.0A
Grade-Up Parts Series no.485
Item No: 15485
★ Input voltage: 2.4-3.0V
★ Torque at recommended load: 1.2-1.5mN-m
★ RPM: 13,400-15,200
★ Current consumption: 1.6-2.0A
Grade-Up Parts Series no.486
Item No: 15486
★ Input voltage: 2.4-3.0V
★ Torque at recommended load: 1.5-1.8mN-m
★ RPM: 12,700-14,900
★ Current consumption: 1.8-2.2A
Grade-Up Parts Series no.487
Item No: 15487
★ Input voltage: 2.4-3.0V
★ Torque at recommended load: 1.7-2.1mN-m
★ RPM: 12,200-14,400
★ Current consumption: 1.7-2.0A
AO Parts
Item No: 10307
★ These are spring washers for use in Mini 4WD cars. Contains 2mm Spring Washers x20 Compatible with Mini 4WD & Mini 4WD PRO cars.
Grade-Up Parts Series no.163
Item No: 15163
★ This handy case is divided internally into six compartments, with space for pinion gears, screws, nuts, ball bearings and other essentials!
Grade-Up Parts Series no.354
Item No: 15354
★ This box was designed especially for the Mini 4WD racer!
★ The various internal sections expand once the box is opened, allowing quick access to your parts.
★ Dividers can be moved depending upon the size of the parts you carry.
★ The bottom section can hold up to three fully hopped-up Mini 4WD cars.
★ Dimensions: 355mm x 205mm x 145mm
Grade-Up Parts Series no.386
Item No: 15386
★ Use these components with varying lengths of screws for your own customized setup.
★ The set includes four each of five cheery colors: blue, green, yellow, orange and red. ★Use the included rubber tubing to help attach them.
Grade-Up Parts Series no.420
Item No: 15420
These rechargeable Ni-MH batteries are lightweight (19g each) and can be recharged approximately 2,000 times. Minimal self-discharging enables long-lasting battery life.
※ Battery life period may change according to usage conditions.
Grade-Up Parts Series no.422
Item No: 15422
★ By simply turning the screw, the 8T pinion gear can be easily removed from the motor shaft.
★ Compatible with brass and resin pinion gears as well as any Type-130 motor.
Grade-Up Parts Series bo.429
Item No: 15429
★ This gear set offers a 3.7:1 ratio for increased acceleration performance compared to Mini 4WD PRO Super Speed Gear Set (for MS Chassis), which has the ratio of 3.5:1, giving racers another option to tune their machines.
Grade-Up Parts Series no.441
Item No: 15441
★ These brake parts help prevent the car from flying off the track from excessive speed during jumps.
★ Set includes three types of brake sponge sheets, each offering a different amount of friction to enable customization of your machine to different track layouts.
Grade-Up Parts Series no.451
Item No: 15451
★ This FRP plate is specially designed for the AR chassis and features holes to enable installation of 9mm, 11mm, 13mm, and 19mm rollers within the standard Mini 4WD race regulations.
★ Screws and roller stoppers also included.
Grade-Up Parts Series no.452
Item No: 15452
★ This FRP plate enables installation of 9mm, 11mm, 13mm, 17mm, and 19mm rollers within the standard Mini 4WD race regulations.
★ Use with Item 15451 FRP Wide Front Plate (for AR Chassis) to achieve more stable cornering performance.
Grade-Up Parts Series no.459
Item No: 15459
★ Boost your car's stability with this set, which includes two FRP side plates and four mass dampers. ★Both bowl and cylinder shape mass dampers are included. ★Bowl weights weight 3.4g each, and cylinders 4.2g each.
Compatible Chassis
★ FM-A, Super XX, AR & MA Chassis cars.
★ Some chassis/bodies may require modification.
Original Goods
Item Nos.: 67235-67238
These stylish T-shirts are released to commemorate the Mini 4WD Japan Cup 2015. They feature the world-famous Tamiya twin-star logo on the front, with the back showing a list of the Japan Cup 2015 event venues and dates. Choose from 4 sizes, all in 100% cotton
| Sizes | S | M | L | XL |
|---|---|---|---|---|
| Length | 66cm | 70cm | 75cm | 79cm |
| Body Width | 49cm | 52cm | 55cm | 58cm |
| Shoulder Width | 44cm | 47cm | 49cm | 52cm |
| Sleeve Length | 19cm | 20cm | 21cm | 22cm |
AO Parts
Item No: 94385
★ It can be used for a wide range of purposes such as remodeling Mini 4WD
★ 2x15mm, 2x30mm round screws x 4 each, 2mm nut, nylon nut, washer, spring washer x 4 each, roller support, aluminum color x 4 each
Limited Edition Mini 4WD Product
Item No: 94893
Handy Circuit
This special edition Oval Home Circuit features an eye-catching color combination of Red, White, and Blue. The lane change section comes with a transparent cover to help prevent cars from flying off the track. Fourteen sections are included and additional separately available Mini 4WD circuit sections can be connected to allow you to make a larger circuit.
Specifications
★ Course Length: 3 laps = approximately 10m
★ Fence Height: 5cm
★ Assembled Course Dimensions: 216cm × 120cm
★ Made from soft plastic.
Mini 4WD Product
Item No: 95514
★ This ultra-handy item will take care of multiple Mini 4WD pit needs, with separate trays that can be used for motor, gears, screws, nuts, shafts and more.
★ The central area is the perfect size for Tamiya HG Aluminum Setting Boards.
★ Basic measurements corresponding to Mini 4WD regulations are also noted on this product.
★ Dimensions: 210mm x 180mm.
★ Material: non-phthalate ATBC-PVC
Mini 4WD Product
Item No: 95619
★ Simply fold together and tuck in the flaps, and you have a great tool for stopping and picking up running Mini 4WD machines.
★ The catcher is black, complete with Mini 4WD Station lettering.
★ Can be used with all types of Mini 4WD and Mini 4WD PRO machines.
★ Dimensions when assembled are W: 110mm, L: 190mm, H: 70mm.
1/24 Sports Car Series no.65
Item No: 24065
★ This is a 1/24 scale plastic model assembly kit depicting the 959, the 4WD super sports car announced by Porsche at the 1983 International Motor Show Germany in Frankfurt.
★ The dynamic form of the car is captured artfully by the model.
★ Features detailed depictions of the 6-cylinder boxer engine, double wishbone suspension and more. Engine hood can be opened after completion.
★ A busy interior includes bucket seats, pedals and much more.
★ Solid synthetic rubber tires give an extra level of detail.
Tamiya Craft Tools Series no.35
Item No: 74035
★ With thinner, sharper-pointed blades - without losing any of the superb cutting edge - than Item 74001, these plastic model side cutters come into their own used upon sprues with finer parts and less clearance, such as details on ship models.
Tamiya Craft Tools Series no.39
Item No: 74039
★ These protective goggles prevent small foreign objects from entering the eyes of the user during model building and craft work.
The wide shafts act as side guards for all-around protection.
★ Made from polycarbonate.
Finishing Materials no.62
Item No: 87062
This quick-hardening cement is perfect for rapidly attaching both plastic and metal parts. The container features a single-push type applicator designed to apply cement one drop at a time with ease and precision. Contents: 2g.
- Games - My video games
- LEGO® Bricks - My LEGO® Bricks
- Transformers - My Transformers toys