ngCNC
Plans for a Successor of the PrismCNC
Statics
- Base Plate Composite
- Stainless Steel Plates
- Aluminum Honeycombs with Frame
- Legs / Feet
- Screws:
- ?x M5
- ?x M6
- Washers:
- ?x M5
- ?x M6
- Nuts:
- ?x M5
- ?x M6
- ?x M6 Hammer Head
- Aluminum Extrusion Profiles:
- ?x Connection Plates
- ?x Corners
- Acrylic / Perspex Box (Fish Tank?)
- With Doors / Hatches
- Metal Box for Electronics
- Lamps / Lights
Robotics
- 3 Axis Linear Guide (Workspace: 650mm x 400mm x 250mm)
- Angular Axis
Milling
- ER11 500W Spindle Motor, Clamp, Driver, Transformer
- Tool Length
- ER11 Collets
- Coolant Spray
- Air Pump / Compressor
- 4x Quick Fixture Clamp
- Switchable Magnets
Electronics
- 5x Motor Drivers
- Laser Light Barrier
- 10x Limit Switch SN04-N 6-36V
- 10x 4 channel logic level converter
- Opamp for spindle motor driver
- 11x Resistors of ratio ~2.7 e.g: 300k, 100k+10k
- 5x 6pin, 1x 3pin Plugs
- Wires / Cables / Tubes
- Red emergency stop button
- Arduino Due for realtime control
- Raspery PI 3 to host the web interface
- Power Supply 400W 12V 33A
- IEC 60320 (C14) with Fuse and Switch
Software
- Movement Control
- Web Interface
- Remote Control
- Upload G-Code