Clone of Primo Interface Board for use with Edison robot.
- Arduino Mega 2560
- IRremote library - https://github.com/z3t0/Arduino-IRremote
- IR LED
- 200R, 2.2kR, 100kR resistors for control blocks
- Status LED
- Button
- Edison robot
Hook up the required components to the Mega
- Digital pin 2 - Start button (input pullup)
- Digital pin 4 - Status LED
- Digital pin 9 - IR LED
- Analog pins 0-15 - Control block resistors
Use the Remote Control Driving programming strips for the Edison to program it to drive according to the resistors connected to the analog pins on the Mega.