A centrifugal fan with built-in motor and controller.
| Qty | Part |
|---|---|
| 1 | Back |
| 1 | Spacer |
| 1 | Front |
| 1 | Impeller |
| Qty | Part |
|---|---|
| 5 | Socket Screw ISO 4762 - M3x30mm |
| 10 | M3 Threaded Insert (Ruthex RX-M3x5.7) |
| 1 | DC Motor (ex. Mabuchi RS-385PV-2465) |
| 1 | ECU (Wolley MotorECU) |
- Print all 3D printable parts in PLA with 0.25 mm layer height.
- Sandpaper the parts slightly and make sure they were printed as intended.
- Assemble it according to explosion drawing.